GitLab

commit 5de4db8f upstream.

We don't need to send firmware data asynchronously, much simpler is just
use synchronous usb_bulk_msg().

[ stable note: this patch was originally developed as cleanup, but it
remove incorrect usage of page_frag_alloc(): alloc more than PAGE_SIZE
and create not ARCH_DMA_MINALIGN dma buffers needed at least for
performance reason. Was tested on 5.0 and 4.20, see
https://bugzilla.kernel.org/show_bug.cgi?id=202673 and
https://bugzilla.kernel.org/show_bug.cgi?id=202241

 ]
Tested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0803278b upstream.

Syzkaller hit 'KASAN: use-after-free Write in sanitize_ptr_alu' bug.

Call trace:

  dump_stack+0xbf/0x12e
  print_address_description+0x6a/0x280
  kasan_report+0x237/0x360
  sanitize_ptr_alu+0x85a/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fault injection trace:

  kfree+0xea/0x290
  free_func_state+0x4a/0x60
  free_verifier_state+0x61/0xe0
  push_stack+0x216/0x2f0	          <- inject failslab
  sanitize_ptr_alu+0x2b1/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

When kzalloc() fails in push_stack(), free_verifier_state() will free
current verifier state. As push_stack() returns, dst_reg was restored
if ptr_is_dst_reg is false. However, as member of the cur_state,
dst_reg is also freed, and error occurs when dereferencing dst_reg.
Simply fix it by testing ret of push_stack() before restoring dst_reg.

Fixes: 979d63d5

 ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 45def77e upstream.

Most (all?) x86 platforms provide a port IO based reset mechanism, e.g.
OUT 92h or CF9h.  Userspace may emulate said mechanism, i.e. reset a
vCPU in response to KVM_EXIT_IO, without explicitly announcing to KVM
that it is doing a reset, e.g. Qemu jams vCPU state and resumes running.

To avoid corruping %rip after such a reset, commit 0967b7bf ("KVM:
Skip pio instruction when it is emulated, not executed") changed the
behavior of PIO handlers, i.e. today's "fast" PIO handling to skip the
instruction prior to exiting to userspace.  Full emulation doesn't need
such tricks becase re-emulating the instruction will naturally handle
%rip being changed to point at the reset vector.

Updating %rip prior to executing to userspace has several drawbacks:

  - Userspace sees the wrong %rip on the exit, e.g. if PIO emulation
    fails it will likely yell about the wrong address.
  - Single step exits to userspace for are effectively dropped as
    KVM_EXIT_DEBUG is overwritten with KVM_EXIT_IO.
  - Behavior of PIO emulation is different depending on whether it
    goes down the fast path or the slow path.

Rather than skip the PIO instruction before exiting to userspace,
snapshot the linear %rip and cancel PIO completion if the current
value does not match the snapshot.  For a 64-bit vCPU, i.e. the most
common scenario, the snapshot and comparison has negligible overhead
as VMCS.GUEST_RIP will be cached regardless, i.e. there is no extra
VMREAD in this case.

All other alternatives to snapshotting the linear %rip that don't
rely on an explicit reset announcenment suffer from one corner case
or another.  For example, canceling PIO completion on any write to
%rip fails if userspace does a save/restore of %rip, and attempting to
avoid that issue by canceling PIO only if %rip changed then fails if PIO
collides with the reset %rip.  Attempting to zero in on the exact reset
vector won't work for APs, which means adding more hooks such as the
vCPU's MP_STATE, and so on and so forth.

Checking for a linear %rip match technically suffers from corner cases,
e.g. userspace could theoretically rewrite the underlying code page and
expect a different instruction to execute, or the guest hardcodes a PIO
reset at 0xfffffff0, but those are far, far outside of what can be
considered normal operation.

Fixes: 432baf60

 ("KVM: VMX: use kvm_fast_pio_in for handling IN I/O")
Cc: <stable@vger.kernel.org>
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0cf9135b upstream.

The CPUID flag ARCH_CAPABILITIES is unconditioinally exposed to host
userspace for all x86 hosts, i.e. KVM advertises ARCH_CAPABILITIES
regardless of hardware support under the pretense that KVM fully
emulates MSR_IA32_ARCH_CAPABILITIES.  Unfortunately, only VMX hosts
handle accesses to MSR_IA32_ARCH_CAPABILITIES (despite KVM_GET_MSRS
also reporting MSR_IA32_ARCH_CAPABILITIES for all hosts).

Move the MSR_IA32_ARCH_CAPABILITIES handling to common x86 code so
that it's emulated on AMD hosts.

Fixes: 1eaafe91

 ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported")
Cc: stable@vger.kernel.org
Reported-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ddba9180 upstream.

KVM's API requires thats ioctls must be issued from the same process
that created the VM.  In other words, userspace can play games with a
VM's file descriptors, e.g. fork(), SCM_RIGHTS, etc..., but only the
creator can do anything useful.  Explicitly reject device ioctls that
are issued by a process other than the VM's creator, and update KVM's
API documentation to extend its requirements to device ioctls.

Fixes: 852b6d57

 ("kvm: add device control API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bebd024e

 upstream.

The SMT disable 'nosmt' command line argument is not working properly when
CONFIG_HOTPLUG_CPU is disabled. The teardown of the sibling CPUs which are
required to be brought up due to the MCE issues, cannot work. The CPUs are
then kept in a half dead state.

As the 'nosmt' functionality has become popular due to the speculative
hardware vulnerabilities, the half torn down state is not a proper solution
to the problem.

Enforce CONFIG_HOTPLUG_CPU=y when SMP is enabled so the full operation is
possible.
Reported-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Micheal Kelley <michael.h.kelley@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190326163811.598166056@linutronix.de

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 206b9235 upstream.

Tianyu reported a crash in a CPU hotplug teardown callback when booting a
kernel which has CONFIG_HOTPLUG_CPU disabled with the 'nosmt' boot
parameter.

It turns out that the SMP=y CONFIG_HOTPLUG_CPU=n case has been broken
forever in case that a bringup callback fails. Unfortunately this issue was
not recognized when the CPU hotplug code was reworked, so the shortcoming
just stayed in place.

When a bringup callback fails, the CPU hotplug code rolls back the
operation and takes the CPU offline.

The 'nosmt' command line argument uses a bringup failure to abort the
bringup of SMT sibling CPUs. This partial bringup is required due to the
MCE misdesign on Intel CPUs.

With CONFIG_HOTPLUG_CPU=y the rollback works perfectly fine, but
CONFIG_HOTPLUG_CPU=n lacks essential mechanisms to exercise the low level
teardown of a CPU including the synchronizations in various facilities like
RCU, NOHZ and others.

As a consequence the teardown callbacks which must be executed on the
outgoing CPU within stop machine with interrupts disabled are executed on
the control CPU in interrupt enabled and preemptible context causing the
kernel to crash and burn. The pre state machine code has a different
failure mode which is more subtle and resulting in a less obvious use after
free crash because the control side frees resources which are still in use
by the undead CPU.

But this is not a x86 only problem. Any architecture which supports the
SMP=y HOTPLUG_CPU=n combination suffers from the same issue. It's just less
likely to be triggered because in 99.99999% of the cases all bringup
callbacks succeed.

The easy solution of making HOTPLUG_CPU mandatory for SMP is not working on
all architectures as the following architectures have either no hotplug
support at all or not all subarchitectures support it:

 alpha, arc, hexagon, openrisc, riscv, sparc (32bit), mips (partial).

Crashing the kernel in such a situation is not an acceptable state
either.

Implement a minimal rollback variant by limiting the teardown to the point
where all regular teardown callbacks have been invoked and leave the CPU in
the 'dead' idle state. This has the following consequences:

 - the CPU is brought down to the point where the stop_machine takedown
   would happen.

 - the CPU stays there forever and is idle

 - The CPU is cleared in the CPU active mask, but not in the CPU online
   mask which is a legit state.

 - Interrupts are not forced away from the CPU

 - All facilities which only look at online mask would still see it, but
   that is the case during normal hotplug/unplug operations as well. It's
   just a (way) longer time frame.

This will expose issues, which haven't been exposed before or only seldom,
because now the normally transient state of being non active but online is
a permanent state. In testing this exposed already an issue vs. work queues
where the vmstat code schedules work on the almost dead CPU which ends up
in an unbound workqueue and triggers 'preemtible context' warnings. This is
not a problem of this change, it merily exposes an already existing issue.
Still this is better than crashing fully without a chance to debug it.

This is mainly thought as workaround for those architectures which do not
support HOTPLUG_CPU. All others should enforce HOTPLUG_CPU for SMP.

Fixes: 2e1a3483

 ("cpu/hotplug: Split out the state walk into functions")
Reported-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Micheal Kelley <michael.h.kelley@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190326163811.503390616@linutronix.de

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7dd47617 upstream.

The rework of the watchdog core to use cpu_stop_work broke the watchdog
cpumask on CPU hotplug.

The watchdog_enable/disable() functions are now called unconditionally from
the hotplug callback, i.e. even on CPUs which are not in the watchdog
cpumask. As a consequence the watchdog can become unstoppable.

Only invoke them when the plugged CPU is in the watchdog cpumask.

Fixes: 9cf57731

 ("watchdog/softlockup: Replace "watchdog/%u" threads with cpu_stop_work")
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903262245490.1789@nanos.tec.linutronix.de

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6f845ebe upstream.

On pseries, TLB multihit are reported as D-Cache Multihit. This is because
the wrongly populated mc_err_types[] array. Per PAPR, TLB error type is 0x04
and mc_err_types[4] points to "D-Cache" instead of "TLB" string. Fixup the
mc_err_types[] array.

Machine check error type per PAPR:
  0x00 = Uncorrectable Memory Error (UE)
  0x01 = SLB error
  0x02 = ERAT Error
  0x04 = TLB error
  0x05 = D-Cache error
  0x07 = I-Cache error

Fixes: 8f0b8056

 ("powerpc/pseries: Display machine check error details.")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d9470757 upstream.

Chandan reported that fstests' generic/026 test hit a crash:

  BUG: Unable to handle kernel data access at 0xc00000062ac40000
  Faulting instruction address: 0xc000000000092240
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries
  CPU: 0 PID: 27828 Comm: chacl Not tainted 5.0.0-rc2-next-20190115-00001-g6de6dba64dda #1
  NIP:  c000000000092240 LR: c00000000066a55c CTR: 0000000000000000
  REGS: c00000062c0c3430 TRAP: 0300   Not tainted  (5.0.0-rc2-next-20190115-00001-g6de6dba64dda)
  MSR:  8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>  CR: 44000842  XER: 20000000
  CFAR: 00007fff7f3108ac DAR: c00000062ac40000 DSISR: 40000000 IRQMASK: 0
  GPR00: 0000000000000000 c00000062c0c36c0 c0000000017f4c00 c00000000121a660
  GPR04: c00000062ac3fff9 0000000000000004 0000000000000020 00000000275b19c4
  GPR08: 000000000000000c 46494c4500000000 5347495f41434c5f c0000000026073a0
  GPR12: 0000000000000000 c0000000027a0000 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: c00000062ea70020 c00000062c0c38d0 0000000000000002 0000000000000002
  GPR24: c00000062ac3ffe8 00000000275b19c4 0000000000000001 c00000062ac30000
  GPR28: c00000062c0c38d0 c00000062ac30050 c00000062ac30058 0000000000000000
  NIP memcmp+0x120/0x690
  LR  xfs_attr3_leaf_lookup_int+0x53c/0x5b0
  Call Trace:
    xfs_attr3_leaf_lookup_int+0x78/0x5b0 (unreliable)
    xfs_da3_node_lookup_int+0x32c/0x5a0
    xfs_attr_node_addname+0x170/0x6b0
    xfs_attr_set+0x2ac/0x340
    __xfs_set_acl+0xf0/0x230
    xfs_set_acl+0xd0/0x160
    set_posix_acl+0xc0/0x130
    posix_acl_xattr_set+0x68/0x110
    __vfs_setxattr+0xa4/0x110
    __vfs_setxattr_noperm+0xac/0x240
    vfs_setxattr+0x128/0x130
    setxattr+0x248/0x600
    path_setxattr+0x108/0x120
    sys_setxattr+0x28/0x40
    system_call+0x5c/0x70
  Instruction dump:
  7d201c28 7d402428 7c295040 38630008 38840008 408201f0 4200ffe8 2c050000
  4182ff6c 20c50008 54c61838 7d201c28 <7d402428> 7d293436 7d4a3436 7c295040

The instruction dump decodes as:
  subfic  r6,r5,8
  rlwinm  r6,r6,3,0,28
  ldbrx   r9,0,r3
  ldbrx   r10,0,r4      <-

Which shows us doing an 8 byte load from c00000062ac3fff9, which
crosses the page boundary at c00000062ac40000 and faults.

It's not OK for memcmp to read past the end of the source or
destination buffers if that would cross a page boundary, because we
don't know that the next page is mapped.

As pointed out by Segher, we can read past the end of the source or
destination as long as we don't cross a 4K boundary, because that's
our minimum page size on all platforms.

The bug is in the code at the .Lcmp_rest_lt8bytes label. When we get
there we know that s1 is 8-byte aligned and we have at least 1 byte to
read, so a single 8-byte load won't read past the end of s1 and cross
a page boundary.

But we have to be more careful with s2. So check if it's within 8
bytes of a 4K boundary and if so go to the byte-by-byte loop.

Fixes: 2d9ee327

 ("powerpc/64: Align bytes before fall back to .Lshort in powerpc64 memcmp()")
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Tested-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ce9afe08 upstream.

In cpu_to_drc_index() in the case when FW_FEATURE_DRC_INFO is absent,
we currently use of_read_property() to obtain the pointer to the array
corresponding to the property "ibm,drc-indexes". The elements of this
array are of type __be32, but are accessed without any conversion to
the OS-endianness, which is buggy on a Little Endian OS.

Fix this by using of_property_read_u32_index() accessor function to
safely read the elements of the array.

Fixes: e83636ac

 ("pseries/drc-info: Search DRC properties for CPU indexes")
Cc: stable@vger.kernel.org # v4.16+
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
[mpe: Make the WARN_ON a WARN_ON_ONCE so it's not retriggerable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 056d28d1

 upstream.

If it is not in the default location, compilation fails at several points.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/91a25e992566a7968fedc89ec80e7f4c83ad0548.1553622500.git.jpoimboe@redhat.com

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f3b4e06b

 upstream.

A TSC packet can slip past MTC packets so that the timestamp appears to
go backwards. One estimate is that can be up to about 40 CPU cycles,
which is certainly less than 0x1000 TSC ticks, but accept slippage an
order of magnitude more to be on the safe side.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 79b58424 ("perf tools: Add Intel PT support for decoding MTC packets")
Link: http://lkml.kernel.org/r/20190325135135.18348-1-adrian.hunter@intel.com

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e94d6b7f

 upstream.

Perf fails to parse uncore event alias, for example:

  # perf stat -e unc_m_clockticks -a --no-merge sleep 1
  event syntax error: 'unc_m_clockticks'
                       \___ parser error

Current code assumes that the event alias is from one specific PMU.

To find the PMU, perf strcmps the PMU name of event alias with the real
PMU name on the system.

However, the uncore event alias may be from multiple PMUs with common
prefix. The PMU name of uncore event alias is the common prefix.

For example, UNC_M_CLOCKTICKS is clock event for iMC, which include 6
PMUs with the same prefix "uncore_imc" on a skylake server.

The real PMU names on the system for iMC are uncore_imc_0 ...
uncore_imc_5.

The strncmp is used to only check the common prefix for uncore event
alias.

With the patch:

  # perf stat -e unc_m_clockticks -a --no-merge sleep 1
  Performance counter stats for 'system wide':

       723,594,722      unc_m_clockticks [uncore_imc_5]
       724,001,954      unc_m_clockticks [uncore_imc_3]
       724,042,655      unc_m_clockticks [uncore_imc_1]
       724,161,001      unc_m_clockticks [uncore_imc_4]
       724,293,713      unc_m_clockticks [uncore_imc_2]
       724,340,901      unc_m_clockticks [uncore_imc_0]

       1.002090060 seconds time elapsed
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: ea1fa48c ("perf stat: Handle different PMU names with common prefix")
Link: http://lkml.kernel.org/r/1552672814-156173-1-git-send-email-kan.liang@linux.intel.com

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d2b2c6dd upstream.

Our MIPS 1004Kc SoCs were seeing random userspace crashes with SIGILL
and SIGSEGV that could not be traced back to a userspace code bug.  They
had all the magic signs of an I/D cache coherency issue.

Now recently we noticed that the /proc/sys/vm/compact_memory interface
was quite efficient at provoking this class of userspace crashes.

Studying the code in mm/migrate.c there is a distinction made between
migrating a page that is mapped at the instant of migration and one that
is not mapped.  Our problem turned out to be the non-mapped pages.

For the non-mapped page the code performs a copy of the page content and
all relevant meta-data of the page without doing the required D-cache
maintenance.  This leaves dirty data in the D-cache of the CPU and on
the 1004K cores this data is not visible to the I-cache.  A subsequent
page-fault that triggers a mapping of the page will happily serve the
process with potentially stale code.

What about ARM then, this bug should have seen greater exposure? Well
ARM became immune to this flaw back in 2010, see commit c0177800
("ARM: 6379/1: Assume new page cache pages have dirty D-cache").

My proposed fix moves the D-cache maintenance inside move_to_new_page to
make it common for both cases.

Link: http://lkml.kernel.org/r/20190315083502.11849-1-larper@axis.com
Fixes: 97ee0524

 ("flush cache before installing new page at migraton")
Signed-off-by: Lars Persson <larper@axis.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f5777bc2 upstream.

Due to has_unmovable_pages() taking an incorrect irqsave flag instead of
the isolation flag in set_migratetype_isolate(), there are issues with
HWPOSION and error reporting where dump_page() is not called when there
is an unmovable page.

Link: http://lkml.kernel.org/r/20190320204941.53731-1-cai@lca.pw
Fixes: d381c547

 ("mm: only report isolation failures when offlining memory")
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>	[5.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c4efe484 upstream.

When start_isolate_page_range() returned -EBUSY in __offline_pages(), it
calls memory_notify(MEM_CANCEL_OFFLINE, &arg) with an uninitialized
"arg".  As the result, it triggers warnings below.  Also, it is only
necessary to notify MEM_CANCEL_OFFLINE after MEM_GOING_OFFLINE.

  page:ffffea0001200000 count:1 mapcount:0 mapping:0000000000000000
  index:0x0
  flags: 0x3fffe000001000(reserved)
  raw: 003fffe000001000 ffffea0001200008 ffffea0001200008 0000000000000000
  raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
  page dumped because: unmovable page
  WARNING: CPU: 25 PID: 1665 at mm/kasan/common.c:665
  kasan_mem_notifier+0x34/0x23b
  CPU: 25 PID: 1665 Comm: bash Tainted: G        W         5.0.0+ #94
  Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20
  10/25/2017
  RIP: 0010:kasan_mem_notifier+0x34/0x23b
  RSP: 0018:ffff8883ec737890 EFLAGS: 00010206
  RAX: 0000000000000246 RBX: ff10f0f4435f1000 RCX: f887a7a21af88000
  RDX: dffffc0000000000 RSI: 0000000000000020 RDI: ffff8881f221af88
  RBP: ffff8883ec737898 R08: ffff888000000000 R09: ffffffffb0bddcd0
  R10: ffffed103e857088 R11: ffff8881f42b8443 R12: dffffc0000000000
  R13: 00000000fffffff9 R14: dffffc0000000000 R15: 0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000560fbd31d730 CR3: 00000004049c6003 CR4: 00000000001606a0
  Call Trace:
   notifier_call_chain+0xbf/0x130
   __blocking_notifier_call_chain+0x76/0xc0
   blocking_notifier_call_chain+0x16/0x20
   memory_notify+0x1b/0x20
   __offline_pages+0x3e2/0x1210
   offline_pages+0x11/0x20
   memory_block_action+0x144/0x300
   memory_subsys_offline+0xe5/0x170
   device_offline+0x13f/0x1e0
   state_store+0xeb/0x110
   dev_attr_store+0x3f/0x70
   sysfs_kf_write+0x104/0x150
   kernfs_fop_write+0x25c/0x410
   __vfs_write+0x66/0x120
   vfs_write+0x15a/0x4f0
   ksys_write+0xd2/0x1b0
   __x64_sys_write+0x73/0xb0
   do_syscall_64+0xeb/0xb78
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f14f75cc3b8
  RSP: 002b:00007ffe84d01d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f14f75cc3b8
  RDX: 0000000000000008 RSI: 0000563f8e433d70 RDI: 0000000000000001
  RBP: 0000563f8e433d70 R08: 000000000000000a R09: 00007ffe84d018f0
  R10: 000000000000000a R11: 0000000000000246 R12: 00007f14f789e780
  R13: 0000000000000008 R14: 00007f14f7899740 R15: 0000000000000008

Link: http://lkml.kernel.org/r/20190320204255.53571-1-cai@lca.pw
Fixes: 79605093

 ("mm, memory_hotplug: print reason for the offlining failure")
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>	[5.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ae2efb1 upstream.

While debugging something, I added a dump_page() into do_swap_page(),
and I got the splat from below.  The issue happens when dereferencing
mapping->host in __dump_page():

  ...
  else if (mapping) {
	pr_warn("%ps ", mapping->a_ops);
	if (mapping->host->i_dentry.first) {
		struct dentry *dentry;
		dentry = container_of(mapping->host->i_dentry.first, struct dentry, d_u.d_alias);
		pr_warn("name:\"%pd\" ", dentry);
	}
  }
  ...

Swap address space does not contain an inode information, and so
mapping->host equals NULL.

Although the dump_page() call was added artificially into
do_swap_page(), I am not sure if we can hit this from any other path, so
it looks worth fixing it.  We can easily do that by checking
mapping->host first.

Link: http://lkml.kernel.org/r/20190318072931.29094-1-osalvador@suse.de
Fixes: 1c6fb1d8

 ("mm: print more information about mapping in __dump_page")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a7f40cfe upstream.

When MPOL_MF_STRICT was specified and an existing page was already on a
node that does not follow the policy, mbind() should return -EIO.  But
commit 6f4576e3 ("mempolicy: apply page table walker on
queue_pages_range()") broke the rule.

And commit c8633798 ("mm: mempolicy: mbind and migrate_pages support
thp migration") didn't return the correct value for THP mbind() too.

If MPOL_MF_STRICT is set, ignore vma_migratable() to make sure it
reaches queue_pages_to_pte_range() or queue_pages_pmd() to check if an
existing page was already on a node that does not follow the policy.
And, non-migratable vma may be used, return -EIO too if MPOL_MF_MOVE or
MPOL_MF_MOVE_ALL was specified.

Tested with https://github.com/metan-ucw/ltp/blob/master/testcases/kernel/syscalls/mbind/mbind02.c

[akpm@linux-foundation.org: tweak code comment]
Link: http://lkml.kernel.org/r/1553020556-38583-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: 6f4576e3

 ("mempolicy: apply page table walker on queue_pages_range()")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Cyril Hrubis <chrubis@suse.cz>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0a352554 upstream.

IOMMUs using ARMv7 short-descriptor format require page tables (level 1
and 2) to be allocated within the first 4GB of RAM, even on 64-bit
systems.

For level 1/2 pages, ensure GFP_DMA32 is used if CONFIG_ZONE_DMA32 is
defined (e.g.  on arm64 platforms).

For level 2 pages, allocate a slab cache in SLAB_CACHE_DMA32.  Note that
we do not explicitly pass GFP_DMA[32] to kmem_cache_zalloc, as this is
not strictly necessary, and would cause a warning in mm/sl*b.c, as we
did not update GFP_SLAB_BUG_MASK.

Also, print an error when the physical address does not fit in
32-bit, to make debugging easier in the future.

Link: http://lkml.kernel.org/r/20181210011504.122604-3-drinkcat@chromium.org
Fixes: ad67f5a6

 ("arm64: replace ZONE_DMA with ZONE_DMA32")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Huaisheng Ye <yehs1@lenovo.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sasha Levin <Alexander.Levin@microsoft.com>
Cc: Tomasz Figa <tfiga@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6d6ea1e9 upstream.

Patch series "iommu/io-pgtable-arm-v7s: Use DMA32 zone for page tables",
v6.

This is a followup to the discussion in [1], [2].

IOMMUs using ARMv7 short-descriptor format require page tables (level 1
and 2) to be allocated within the first 4GB of RAM, even on 64-bit
systems.

For L1 tables that are bigger than a page, we can just use
__get_free_pages with GFP_DMA32 (on arm64 systems only, arm would still
use GFP_DMA).

For L2 tables that only take 1KB, it would be a waste to allocate a full
page, so we considered 3 approaches:
 1. This series, adding support for GFP_DMA32 slab caches.
 2. genalloc, which requires pre-allocating the maximum number of L2 page
    tables (4096, so 4MB of memory).
 3. page_frag, which is not very memory-efficient as it is unable to reuse
    freed fragments until the whole page is freed. [3]

This series is the most memory-efficient approach.

stable@ note:
  We confirmed that this is a regression, and IOMMU errors happen on 4.19
  and linux-next/master on MT8173 (elm, Acer Chromebook R13). The issue
  most likely starts from commit ad67f5a6 ("arm64: replace ZONE_DMA
  with ZONE_DMA32"), i.e. 4.15, and presumably breaks a number of Mediatek
  platforms (and maybe others?).

[1] https://lists.linuxfoundation.org/pipermail/iommu/2018-November/030876.html
[2] https://lists.linuxfoundation.org/pipermail/iommu/2018-December/031696.html
[3] https://patchwork.codeaurora.org/patch/671639/

This patch (of 3):

IOMMUs using ARMv7 short-descriptor format require page tables to be
allocated within the first 4GB of RAM, even on 64-bit systems.  On arm64,
this is done by passing GFP_DMA32 flag to memory allocation functions.

For IOMMU L2 tables that only take 1KB, it would be a waste to allocate
a full page using get_free_pages, so we considered 3 approaches:
 1. This patch, adding support for GFP_DMA32 slab caches.
 2. genalloc, which requires pre-allocating the maximum number of L2
    page tables (4096, so 4MB of memory).
 3. page_frag, which is not very memory-efficient as it is unable
    to reuse freed fragments until the whole page is freed.

This change makes it possible to create a custom cache in DMA32 zone using
kmem_cache_create, then allocate memory using kmem_cache_alloc.

We do not create a DMA32 kmalloc cache array, as there are currently no
users of kmalloc(..., GFP_DMA32).  These calls will continue to trigger a
warning, as we keep GFP_DMA32 in GFP_SLAB_BUG_MASK.

This implies that calls to kmem_cache_*alloc on a SLAB_CACHE_DMA32
kmem_cache must _not_ use GFP_DMA32 (it is anyway redundant and
unnecessary).

Link: http://lkml.kernel.org/r/20181210011504.122604-2-drinkcat@chromium.org

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Sasha Levin <Alexander.Levin@microsoft.com>
Cc: Huaisheng Ye <yehs1@lenovo.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tomasz Figa <tfiga@google.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9b7ea46a upstream.

Commit f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded
memory to zones until online") introduced move_pfn_range_to_zone() which
calls memmap_init_zone() during onlining a memory block.
memmap_init_zone() will reset pagetype flags and makes migrate type to
be MOVABLE.

However, in __offline_pages(), it also call undo_isolate_page_range()
after offline_isolated_pages() to do the same thing.  Due to commit
2ce13640 ("mm: __first_valid_page skip over offline pages") changed
__first_valid_page() to skip offline pages, undo_isolate_page_range()
here just waste CPU cycles looping around the offlining PFN range while
doing nothing, because __first_valid_page() will return NULL as
offline_isolated_pages() has already marked all memory sections within
the pfn range as offline via offline_mem_sections().

Also, after calling the "useless" undo_isolate_page_range() here, it
reaches the point of no returning by notifying MEM_OFFLINE.  Those pages
will be marked as MIGRATE_MOVABLE again once onlining.  The only thing
left to do is to decrease the number of isolated pageblocks zone counter
which would make some paths of the page allocation slower that the above
commit introduced.

Even if alloc_contig_range() can be used to isolate 16GB-hugetlb pages
on ppc64, an "int" should still be enough to represent the number of
pageblocks there.  Fix an incorrect comment along the way.

[cai@lca.pw: v4]
  Link: http://lkml.kernel.org/r/20190314150641.59358-1-cai@lca.pw
Link: http://lkml.kernel.org/r/20190313143133.46200-1-cai@lca.pw
Fixes: 2ce13640

 ("mm: __first_valid_page skip over offline pages")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>	[4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e82adc10 upstream.

Currently there is no check on platform_get_irq() return value
in case it fails, hence never actually reporting any errors and
causing unexpected behavior when using such value as argument
for function regmap_irq_get_virq().

Fix this by adding a proper check, a message error and return
*irq* in case platform_get_irq() fails.

Addresses-Coverity-ID: 1443899 ("Improper use of negative value")
Fixes: d2061f9c

 ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 976daf9d

 upstream.

PD 2.0 sinks are supposed to accept src-capabilities with a 3.0 header and
simply ignore any src PDOs which the sink does not understand such as PPS
but some 2.0 sinks instead ignore the entire PD_DATA_SOURCE_CAP message,
causing contract negotiation to fail.

This commit fixes such sinks not working by re-trying the contract
negotiation with PD-2.0 source-caps messages if we don't have a contract
after PD_N_HARD_RESET_COUNT hard-reset attempts.

The problem fixed by this commit was noticed with a Type-C to VGA dongle.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 93e1c8a6 upstream.

When the kernel is compiled with preemption enabled, the URB completion
handler can run in parallel with the work responsible for waking up the
tty layer. If the URB handler sets the EVENT_TTY_WAKEUP bit during the
call to tty_port_tty_wakeup() to signal that there is room for additional
input, it will be cleared at the end of this call. As a result, TX traffic
on the upper layer will be blocked.

This can be seen with a kernel configured with CONFIG_PREEMPT, and a fast
modem connected with PPP running over a USB CDC-ACM port.

Use test_and_clear_bit() instead, which ensures that each wakeup requested
by the URB completion code will trigger a call to tty_port_tty_wakeup().

Fixes: 1aba579f

 cdc-acm: handle read pipe errors
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d92f2c59 upstream.

Commit 2f31a67f ("usb: xhci: Prevent bus suspend if a port connect
change or polling state is detected") was intended to prevent ports that
were still link training from being forced to U3 suspend state mid
enumeration.
This solved enumeration issues for devices with slow link training.

Turns out some devices are stuck in the link training/polling state,
and thus that patch will prevent suspend completely for these devices.
This is seen with USB3 card readers in some MacBooks.

Instead of preventing suspend, give some time to complete the link
training. On successful training the port will end up as connected
and enabled.
If port instead is stuck in link training the bus suspend will continue
suspending after 360ms (10 * 36ms) timeout (tPollingLFPSTimeout).

Original patch was sent to stable, this one should go there as well

Fixes: 2f31a67f

 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8867ea26

 upstream.

The xhci debug capability (DbC) feature did its memory cleanup with
spinlock held. dma_free_coherent() warns if called with interrupts
disabled

move the memory cleanup outside the spinlock

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6cbcf596

 upstream.

A suspended SS port in U3 link state will go to U0 when resumed, but
can almost immediately after that enter U1 or U2 link power save
states before host controller driver reads the port status.

Host controller driver only checks for U0 state, and might miss
the finished resume, leaving flags unclear and skip notifying usb
code of the wake.

Add U1 and U2 to the possible link states when checking for finished
port resume.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 40fc1653

 upstream.

When plugging BUFFALO LUA4-U3-AGT USB3.0 to Gigabit Ethernet LAN
Adapter, warning messages filled up dmesg.

[  101.098287] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk?
[  101.117463] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk?
[  101.136513] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk?

Adding the XHCI_TRUST_TX_LENGTH quirk resolves the issue.
Signed-off-by: Yasushi Asano <yasano@jp.adit-jv.com>
Signed-off-by: Spyridon Papageorgiou <spapageorgiou@de.adit-jv.com>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cae85cb8 upstream.

Aneesh has reported that PPC triggers the following warning when
excercising DAX code:

  IP set_pte_at+0x3c/0x190
  LR insert_pfn+0x208/0x280
  Call Trace:
     insert_pfn+0x68/0x280
     dax_iomap_pte_fault.isra.7+0x734/0xa40
     __xfs_filemap_fault+0x280/0x2d0
     do_wp_page+0x48c/0xa40
     __handle_mm_fault+0x8d0/0x1fd0
     handle_mm_fault+0x140/0x250
     __do_page_fault+0x300/0xd60
     handle_page_fault+0x18

Now that is WARN_ON in set_pte_at which is

        VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep));

The problem is that on some architectures set_pte_at() cannot cope with
a situation where there is already some (different) valid entry present.

Use ptep_set_access_flags() instead to modify the pfn which is built to
deal with modifying existing PTE.

Link: http://lkml.kernel.org/r/20190311084537.16029-1-jack@suse.cz
Fixes: b2770da6

 "mm: add vm_insert_mixed_mkwrite()"
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Chandan Rajendra <chandan@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 238e0268 upstream.

There are cases where multiple device tree nodes point to the
same phy node by means of the "phys" property, but we should
only consider those nodes that are marked as available rather
than just any node.

Fixes: 98bfb394

 ("usb: of: add an api to get dr_mode by the phy node")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 072684e8

 upstream.

In f_hidg_write() the write_spinlock is acquired before calling
usb_ep_queue() which causes a deadlock when dummy_hcd is being used.
This is because dummy_queue() callbacks into f_hidg_req_complete() which
tries to acquire the same spinlock. This is (part of) the backtrace when
the deadlock occurs:

  0xffffffffc06b1410 in f_hidg_req_complete
  0xffffffffc06a590a in usb_gadget_giveback_request
  0xffffffffc06cfff2 in dummy_queue
  0xffffffffc06a4b96 in usb_ep_queue
  0xffffffffc06b1eb6 in f_hidg_write
  0xffffffff8127730b in __vfs_write
  0xffffffff812774d1 in vfs_write
  0xffffffff81277725 in SYSC_write

Fix this by releasing the write_spinlock before calling usb_ep_queue()
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org # 4.11+
Fixes: 749494b6

 ("usb: gadget: f_hid: fix: Move IN request allocation to set_alt()")
Signed-off-by: Radoslav Gerganov <rgerganov@vmware.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3d54d10c upstream.

When EXTCON is a loadable module, mtu3 fails to link as built-in:

drivers/usb/mtu3/mtu3_plat.o: In function `mtu3_probe':
mtu3_plat.c:(.text+0x690): undefined reference to `extcon_get_edev_by_phandle'

Add a Kconfig dependency to force mtu3 also to be a loadable module
if extconn is, but still allow it to be built without extcon.

Fixes: d0ed062a

 ("usb: mtu3: dual-role mode support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1396929e upstream.

While only the first PHY supports mode switching, the remaining PHYs
work in USB host mode. They should support set_mode with mode=USB_HOST
instead of failing. This is especially needed now that the USB core does
set_mode for all USB ports, which was added in commit b97a3134 ("usb:
core: comply to PHY framework").

Make set_mode with mode=USB_HOST a no-op instead of failing for the
non-OTG USB PHYs.

Fixes: 6ba43c29

 ("phy-sun4i-usb: Add support for phy_set_mode")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c5bc6e52 upstream.

Current code test wrong value so it does not verify if the written
data is correctly read back. Fix it.
Also make it return -EPERM if read value does not match written bit,
just like it done for adnp_gpio_direction_output().

Fixes: 5e969a40

 ("gpio: Add Avionic Design N-bit GPIO expander support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7ecced09

 upstream.

ida_simple_get may fail and return a negative error number.
The fix checks its return value; if it fails, go to err_destroy.

Cc: <stable@vger.kernel.org>
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 69903dfa upstream.

This patch fixes the PORT_SYNC_MODE_MASTER_SELECT macro
to correctly do the left shifting to set the port sync
master select correctly.
I have tested this fix on ICL.

Fixes: 49edbd49

 ("drm/i915/icl: Define TRANS_DDI_FUNC_CTL DSI registers")
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319221847.21311-1-manasi.d.navare@intel.com
(cherry picked from commit 7264aebb

)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 13bcb80b upstream.

When MI_FLUSH_DW post write hw status page in index mode, the index
value is in dword step and turned into address offset in cmd dword1.
As status page size is 4K, so can't exceed that.

This fixed upper bound check in cmd parser code which incorrectly
stopped VM for reason of invalid MI_FLUSH_DW write index.

v2:
- Fix upper bound as 4K page size because index value is address offset.

Fixes: be1da707

 ("drm/i915/gvt: vGPU command scanner")
Cc: stable@vger.kernel.org # v4.10+
Cc: "Zhao, Yan Y" <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4b9a3932 upstream.

If I'm reading the spec right AML 0x87CA is a Y SKU, so it
should be marked as ULX in our old style terminology.

Cc: stable@vger.kernel.org
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: c0c46ca4

 ("drm/i915/aml: Add new Amber Lake PCI ID")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322204944.23613-1-ville.syrjala@linux.intel.com

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 57b1c446

)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>