nfs: disintegrate UAPI for nfs

This is to complete part of the Userspace API (UAPI) disintegration for which
the preparatory patches were pulled recently.  After these patches, userspace
headers will be segregated into:

        include/uapi/linux/.../foo.h

for the userspace interface stuff, and:

        include/linux/.../foo.h

for the strictly kernel internal stuff.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Documentation/00-INDEX

@@ -270,8 +270,6 @@ preempt-locking.txt
 	- info on locking under a preemptive kernel.
 printk-formats.txt
 	- how to get printk format specifiers right
-prio_tree.txt
-	- info on radix-priority-search-tree use for indexing vmas.
 ramoops.txt
 	- documentation of the ramoops oops/panic logging module.
 rbtree.txt

Documentation/ABI/obsolete/proc-pid-oom_adj

-What:	/proc/<pid>/oom_adj
-When:	August 2012
-Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
-	badness heuristic used to determine which task to kill when the kernel
-	is out of memory.
-
-	The badness heuristic has since been rewritten since the introduction of
-	this tunable such that its meaning is deprecated.  The value was
-	implemented as a bitshift on a score generated by the badness()
-	function that did not have any precise units of measure.  With the
-	rewrite, the score is given as a proportion of available memory to the
-	task allocating pages, so using a bitshift which grows the score
-	exponentially is, thus, impossible to tune with fine granularity.
-
-	A much more powerful interface, /proc/<pid>/oom_score_adj, was
-	introduced with the oom killer rewrite that allows users to increase or
-	decrease the badness score linearly.  This interface will replace
-	/proc/<pid>/oom_adj.
-
-	A warning will be emitted to the kernel log if an application uses this
-	deprecated interface.  After it is printed once, future warnings will be
-	suppressed until the kernel is rebooted.

Documentation/ABI/testing/ima_policy

@@ -12,11 +12,14 @@ Description:
 		then closing the file.  The new policy takes effect after
 		the file ima/policy is closed.
 
+		IMA appraisal, if configured, uses these file measurements
+		for local measurement appraisal.
+
 		rule format: action [condition ...]
 
-		action: measure | dont_measure
+		action: measure | dont_measure | appraise | dont_appraise | audit
 		condition:= base | lsm
-			base:	[[func=] [mask=] [fsmagic=] [uid=]]
+			base:	[[func=] [mask=] [fsmagic=] [uid=] [fowner]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
@@ -24,36 +27,50 @@ Description:
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
+			fowner:=decimal value
 		lsm:  	are LSM specific
 
 		default policy:
 			# PROC_SUPER_MAGIC
 			dont_measure fsmagic=0x9fa0
+			dont_appraise fsmagic=0x9fa0
 			# SYSFS_MAGIC
 			dont_measure fsmagic=0x62656572
+			dont_appraise fsmagic=0x62656572
 			# DEBUGFS_MAGIC
 			dont_measure fsmagic=0x64626720
+			dont_appraise fsmagic=0x64626720
 			# TMPFS_MAGIC
 			dont_measure fsmagic=0x01021994
+			dont_appraise fsmagic=0x01021994
+			# RAMFS_MAGIC
+			dont_measure fsmagic=0x858458f6
+			dont_appraise fsmagic=0x858458f6
 			# SECURITYFS_MAGIC
 			dont_measure fsmagic=0x73636673
+			dont_appraise fsmagic=0x73636673
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
 			measure func=FILE_CHECK mask=MAY_READ uid=0
+			appraise fowner=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in do_filp_open.
+		open for read by root in do_filp_open.  The default appraisal
+		policy appraises all files owned by root.
 
 		Examples of LSM specific definitions:
 
 		SELinux:
 			# SELINUX_MAGIC
-			dont_measure fsmagic=0xF97CFF8C
+			dont_measure fsmagic=0xf97cff8c
+			dont_appraise fsmagic=0xf97cff8c
 
 			dont_measure obj_type=var_log_t
+			dont_appraise obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
+			dont_appraise obj_type=auditd_log_t
 			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
 			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 

Documentation/ABI/testing/sysfs-bus-pci

@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.

Documentation/ABI/testing/sysfs-bus-rbd

@@ -25,6 +25,10 @@ client_id
 
 	The ceph unique client id that was assigned for this specific session.
 
+features
+
+	A hexadecimal encoding of the feature bits for this image.
+
 major
 
 	The block device major number.
@@ -33,6 +37,11 @@ name
 
 	The name of the rbd image.
 
+image_id
+
+	The unique id for the rbd image.  (For rbd image format 1
+	this is empty.)
+
 pool
 
 	The name of the storage pool where this rbd image resides.
@@ -57,12 +66,6 @@ current_snap
 
 	The current snapshot for which the device is mapped.
 
-create_snap
-
-	Create a snapshot:
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
-
 snap_*
 
 	A directory per each snapshot
@@ -79,4 +82,7 @@ snap_size
 
 	The size of the image when this snapshot was taken.
 
+snap_features
+
+	A hexadecimal encoding of the feature bits for this snapshot.
 

Documentation/ABI/testing/sysfs-bus-usb

@@ -220,3 +220,10 @@ Description:
 		If the device doesn't support LTM, the file will read "no".
 		The file will be present for all speeds of USB devices, and will
 		always read "no" for USB 1.1 and USB 2.0 devices.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX
+Date:		August 2012
+Contact:	Lan Tianyu <tianyu.lan@intel.com>
+Description:
+		The /sys/bus/usb/devices/.../(hub interface)/portX
+		is usb port device's sysfs directory.

Documentation/ABI/testing/sysfs-class-extcon

@@ -13,7 +13,7 @@ Description:
 		accessory cables have such capability. For example,
 		the 30-pin port of Nuri board (/arch/arm/mach-exynos)
 		may have both HDMI and Charger attached, or analog audio,
-		video, and USB cables attached simulteneously.
+		video, and USB cables attached simultaneously.
 
 		If there are cables mutually exclusive with each other,
 		such binary relations may be expressed with extcon_dev's
@@ -35,7 +35,7 @@ Description:
 		The /sys/class/extcon/.../state shows and stores the cable
 		attach/detach information of the corresponding extcon object.
 		If the extcon object has an optional callback "show_state"
-		defined, the showing function is overriden with the optional
+		defined, the showing function is overridden with the optional
 		callback.
 
 		If the default callback for showing function is used, the
@@ -46,19 +46,19 @@ Description:
 		TA=1
 		EAR_JACK=0
 		#
-		In this example, the extcon device have USB_OTG and TA
+		In this example, the extcon device has USB_OTG and TA
 		cables attached and HDMI and EAR_JACK cables detached.
 
 		In order to update the state of an extcon device, enter a hex
-		state number starting with 0x.
-		 echo 0xHEX > state
+		state number starting with 0x:
+		# echo 0xHEX > state
 
-		This updates the whole state of the extcon dev.
+		This updates the whole state of the extcon device.
 		Inputs of all the methods are required to meet the
-		mutually_exclusive contidions if they exist.
+		mutually_exclusive conditions if they exist.
 
 		It is recommended to use this "global" state interface if
-		you need to enter the value atomically. The later state
+		you need to set the value atomically. The later state
 		interface associated with each cable cannot update
 		multiple cable states of an extcon device simultaneously.
 
@@ -73,7 +73,7 @@ What:		/sys/class/extcon/.../cable.x/state
 Date:		February 2012
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/extcon/.../cable.x/name shows and stores the
+		The /sys/class/extcon/.../cable.x/state shows and stores the
 		state of cable "x" (integer between 0 and 31) of an extcon
 		device. The state value is either 0 (detached) or 1
 		(attached).
@@ -83,8 +83,8 @@ Date:		December 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
 		Shows the relations of mutually exclusiveness. For example,
-		if the mutually_exclusive array of extcon_dev is
-		{0x3, 0x5, 0xC, 0x0}, the, the output is:
+		if the mutually_exclusive array of extcon device is
+		{0x3, 0x5, 0xC, 0x0}, then the output is:
 		# ls mutually_exclusive/
 		0x3
 		0x5

Documentation/ABI/testing/sysfs-class-regulator

@@ -349,3 +349,24 @@ Description:
 
 		This will be one of the same strings reported by
 		the "state" attribute.
+
+What:		/sys/class/regulator/.../bypass
+Date:		September 2012
+KernelVersion:	3.7
+Contact:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+Description:
+		Some regulator directories will contain a field called
+		bypass.  This indicates if the device is in bypass mode.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator is in bypass mode.
+
+		'disabled' means that the regulator is regulating.
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.

Documentation/ABI/testing/sysfs-devices-firmware_node

+What:		/sys/devices/.../firmware_node/
+Date:		September 2012
+Contact:	<>
+Description:
+		The /sys/devices/.../firmware_node directory contains attributes
+		allowing the user space to check and modify some firmware
+		related properties of given device.
+
+What:		/sys/devices/.../firmware_node/description
+Date:		September 2012
+Contact:	Lance Ortiz <lance.ortiz@hp.com>
+Description:
+		The /sys/devices/.../firmware/description attribute contains a string
+		that describes the device as provided by the _STR method in the ACPI
+		namespace.  This attribute is read-only.  If the device does not have
+		an _STR method associated with it in the ACPI namespace, this
+		attribute is not present.

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -176,3 +176,14 @@ Description:	Disable L3 cache indices
 		All AMD processors with L3 caches provide this functionality.
 		For details, see BKDGs at
 		http://developer.amd.com/documentation/guides/Pages/default.aspx
+
+
+What:		/sys/devices/system/cpu/cpufreq/boost
+Date:		August 2012
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Processor frequency boosting control
+
+		This switch controls the boost setting for the whole system.
+		Boosting allows the CPU and the firmware to run at a frequency
+		beyound it's nominal limit.
+		More details can be found in Documentation/cpu-freq/boost.txt

Documentation/ABI/testing/sysfs-driver-ppi

+What:		/sys/devices/pnp0/<bus-num>/ppi/
+Date:		August 2012
+Kernel Version:	3.6
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This folder includes the attributes related with PPI (Physical
+		Presence Interface). Only if TPM is supported by BIOS, this
+		folder makes sence. The folder path can be got by command
+		'find /sys/ -name 'pcrs''. For the detail information of PPI,
+		please refer to the PPI specification from
+		http://www.trustedcomputinggroup.org/
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/version
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the version of the PPI supported by the
+		platform.
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/request
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the request for an operation to be
+		executed in the pre-OS environment. It is the only input from
+		the OS to the pre-OS environment. The request should be an
+		integer value range from 1 to 160, and 0 means no request.
+		This file can be read and written.
+
+What:		/sys/devices/pnp0/00:<bus-num>/ppi/response
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the response to the most recent operation
+		request it acted upon. The format is "<request> <response num>
+		: <response description>".
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/transition_action
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the platform-specific action that should
+		take place in order to transition to the BIOS for execution of
+		a requested operation. The format is "<action num>: <action
+		description>".
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/tcg_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the requests defined by TCG, i.e. requests from 1 to 22.
+		The format is "<request> <status num>: <status description>".
+		This attribute is only supported by PPI version 1.2+.
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/vs_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the verdor specific requests, i.e. requests from 128 to
+		255. The format is same with tcg_operations. This attribute
+		is also only supported by PPI version 1.2+.
+		This file is readonly.

Documentation/ABI/testing/sysfs-driver-wacom

+WWhat:		/sys/class/hidraw/hidraw*/device/oled*_img
+Date:		June 2012
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/class/hidraw/hidraw*/device/oled*_img files control
+		OLED mocro displays on Intuos4 Wireless tablet. Accepted image
+		has to contain 256 bytes (64x32 px 1 bit colour). The format
+		is the same as PBM image 62x32px without header (64 bits per
+		horizontal line, 32 lines). An example of setting OLED No. 0:
+		dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img
+		The attribute is read only and no local copy of the image is
+		stored.
+
 What:		/sys/class/hidraw/hidraw*/device/speed
 Date:		April 2010
 Kernel Version:	2.6.35

Documentation/ABI/testing/sysfs-fs-ext4

@@ -96,3 +96,16 @@ Contact:	"Theodore Ts'o" <tytso@mit.edu>
 Description:
 		The maximum number of megabytes the writeback code will
 		try to write out before move on to another inode.
+
+What:		/sys/fs/ext4/<disk>/extent_max_zeroout_kb
+Date:		August 2012
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of kilobytes which will be zeroed
+		out in preference to creating a new uninitialized
+		extent when manipulating an inode's extent tree.  Note
+		that using a larger value will increase the
+		variability of time necessary to complete a random
+		write operation (since a 4k random write might turn
+		into a much larger write due to the zeroout
+		operation).

Documentation/ABI/testing/sysfs-platform-ideapad-laptop

@@ -5,4 +5,15 @@ Contact:	"Ike Panhc <ike.pan@canonical.com>"
 Description:
 		Control the power of camera module. 1 means on, 0 means off.
 
+What:		/sys/devices/platform/ideapad/fan_mode
+Date:		June 2012
+KernelVersion:	3.6
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Change fan mode
+		There are four available modes:
+			* 0 -> Super Silent Mode
+			* 1 -> Standard Mode
+			* 2 -> Dust Cleaning
+			* 4 -> Efficient Thermal Dissipation Mode
 

Documentation/ABI/testing/sysfs-ptp

@@ -19,7 +19,11 @@ Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
 		This file contains the name of the PTP hardware clock
-		as a human readable string.
+		as a human readable string. The purpose of this
+		attribute is to provide the user with a "friendly
+		name" and to help distinguish PHY based devices from
+		MAC based ones. The string does not necessarily have
+		to be any kind of unique id.
 
 What:		/sys/class/ptp/ptpN/max_adjustment
 Date:		September 2010

Documentation/ABI/testing/sysfs-tty

@@ -17,3 +17,12 @@ Description:
 		 device, like 'tty1'.
 		 The file supports poll() to detect virtual
 		 console switches.
+
+What:		/sys/class/tty/ttyS0/uartclk
+Date:		Sep 2012
+Contact:	Tomas Hlavacek <tmshlvck@gmail.com>
+Description:
+		 Shows the current uartclk value associated with the
+		 UART port in serial_core, that is bound to TTY like ttyS0.
+		 uartclk = 16 * baud_base
+

Documentation/CodingStyle

@@ -454,6 +454,16 @@ The preferred style for long (multi-line) comments is:
 	 * with beginning and ending almost-blank lines.
 	 */
 
+For files in net/ and drivers/net/ the preferred style for long (multi-line)
+comments is a little different.
+
+	/* The preferred comment style for files in net/ and drivers/net
+	 * looks like this.
+	 *
+	 * It is nearly the same as the generally preferred comment style,
+	 * but there is no initial almost-blank line.
+	 */
+
 It's also important to comment data, whether they are basic types or derived
 types.  To this end, use just one data declaration per line (no commas for
 multiple data declarations).  This leaves you room for a small comment on each

Documentation/DocBook/media/Makefile

@@ -300,7 +300,7 @@ $(MEDIA_OBJ_DIR)/media-entities.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml
 	@(								\
 	for ident in $(IOCTLS) ; do					\
 	  entity=`echo $$ident | tr _ -` ;				\
-	  id=`grep "<refname>$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \
+	  id=`grep "<refname>$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml $(MEDIA_OBJ_DIR)/media-ioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \
 	  echo "<!ENTITY $$entity \"<link"				\
 	    "linkend='$$id'><constant>$$ident</constant></link>\">"	\
 	  >>$@ ;							\

Documentation/DocBook/media/dvb/audio.xml

 <title>DVB Audio Device</title>
 <para>The DVB audio device controls the MPEG2 audio decoder of the DVB hardware. It
 can be accessed through <emphasis role="tt">/dev/dvb/adapter0/audio0</emphasis>. Data types and and
-ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/video.h</emphasis> in your
+ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/audio.h</emphasis> in your
 application.
 </para>
 <para>Please note that some DVB cards don&#8217;t have their own MPEG decoder, which results in
 the omission of the audio and video device.
 </para>
+<para>
+These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use
+of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls
+have been created to replace that functionality.</para>
 
 <section id="audio_data_types">
 <title>Audio Data Types</title>
@@ -558,6 +562,8 @@ role="subsection"><title>AUDIO_SELECT_SOURCE</title>
 role="subsection"><title>AUDIO_SET_MUTE</title>
 <para>DESCRIPTION
 </para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+&VIDIOC-DECODER-CMD; with the <constant>V4L2_DEC_CMD_START_MUTE_AUDIO</constant> flag instead.</para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>This ioctl call asks the audio device to mute the stream that is currently being
@@ -730,6 +736,8 @@ role="subsection"><title>AUDIO_SET_BYPASS_MODE</title>
 role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
 <para>DESCRIPTION
 </para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+<constant>V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK</constant> control instead.</para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>This ioctl call asks the Audio Device to select the requested channel if possible.</para>
@@ -772,6 +780,109 @@ role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
  </row></tbody></tgroup></informaltable>
 &return-value-dvb;
 
+</section><section id="AUDIO_BILINGUAL_CHANNEL_SELECT"
+role="subsection"><title>AUDIO_BILINGUAL_CHANNEL_SELECT</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. It has been replaced by
+the V4L2 <constant>V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK</constant> control
+for MPEG decoders controlled through V4L2.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to select the requested channel for bilingual streams if possible.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_channel_select_t
+ch</para>
+</entry><entry
+ align="char">
+<para>Select the output format of the audio (mono left/right,
+ stereo).</para>
+</entry>
+ </row>
+</tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_GET_PTS"
+role="subsection"><title>AUDIO_GET_PTS</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. If you need this functionality,
+then please contact the linux-media mailing list (&v4l-ml;).</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to return the current PTS timestamp.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_GET_PTS, __u64 *pts);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_GET_PTS for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u64 *pts
+</para>
+</entry><entry
+ align="char">
+<para>Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
+</para>
+<para>
+The PTS should belong to the currently played
+frame if possible, but may also be a value close to it
+like the PTS of the last decoded frame or the last PTS
+extracted by the PES parser.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
 </section><section id="AUDIO_GET_STATUS"
 role="subsection"><title>AUDIO_GET_STATUS</title>
 <para>DESCRIPTION