spelling fixes

acquired (aquired)
contiguous (contigious)
successful (succesful, succesfull)
surprise (suprise)
whether (weather)
some other misspellings
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

arch/i386/kernel/cpu/cyrix.c

@@ -354,7 +354,7 @@ static void __init init_nsc(struct cpuinfo_x86 *c)
 	 * This function only handles the GX processor, and kicks every
 	 * thing else to the Cyrix init function above - that should
 	 * cover any processors that might have been branded differently
-	 * after NSC aquired Cyrix.
+	 * after NSC acquired Cyrix.
 	 *
 	 * If this breaks your GX1 horribly, please e-mail
 	 * info-linux@ldcmail.amd.com to tell us.

arch/i386/kernel/i8259.c

@@ -175,7 +175,7 @@ static void mask_and_ack_8259A(unsigned int irq)
 	 * Lightweight spurious IRQ detection. We do not want
 	 * to overdo spurious IRQ handling - it's usually a sign
 	 * of hardware problems, so we only do the checks we can
-	 * do without slowing down good hardware unnecesserily.
+	 * do without slowing down good hardware unnecessarily.
 	 *
 	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
 	 * usually resulting from the 8259A-1|2 PICs) occur

arch/mips/momentum/ocelot_g/gt-irq.c

@@ -59,7 +59,7 @@ void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr)
  * bit_num   - Indicates which bit number in the cause register
  *
  * Outputs :
- * 1 if succesful, 0 if failure
+ * 1 if successful, 0 if failure
  */
 int enable_galileo_irq(int int_cause, int bit_num)
 {
@@ -83,7 +83,7 @@ int enable_galileo_irq(int int_cause, int bit_num)
  * bit_num   - Indicates which bit number in the cause register
  *
  * Outputs :
- * 1 if succesful, 0 if failure
+ * 1 if successful, 0 if failure
  */
 int disable_galileo_irq(int int_cause, int bit_num)
 {

arch/powerpc/platforms/cell/spufs/switch.c

@@ -2100,7 +2100,7 @@ EXPORT_SYMBOL_GPL(spu_save);
  * @spu: pointer to SPU iomem structure.
  *
  * Perform harvest + restore, as we may not be coming
- * from a previous succesful save operation, and the
+ * from a previous successful save operation, and the
  * hardware state is unknown.
  */
 int spu_restore(struct spu_state *new, struct spu *spu)

arch/powerpc/platforms/pseries/eeh_cache.c

@@ -287,7 +287,7 @@ void pci_addr_cache_remove_device(struct pci_dev *dev)
  * find the pci device that corresponds to a given address.
  * This routine scans all pci busses to build the cache.
  * Must be run late in boot process, after the pci controllers
- * have been scaned for devices (after all device resources are known).
+ * have been scanned for devices (after all device resources are known).
  */
 void __init pci_addr_cache_build(void)
 {

arch/s390/kernel/vtime.c

@@ -356,7 +356,7 @@ static void internal_add_vtimer(struct vtimer_list *timer)
 
 	set_vtimer(event->expires);
 	spin_unlock_irqrestore(&vt_list->lock, flags);
-	/* release CPU aquired in prepare_vtimer or mod_virt_timer() */
+	/* release CPU acquired in prepare_vtimer or mod_virt_timer() */
 	put_cpu();
 }
 

arch/um/drivers/ubd_kern.c

@@ -1222,7 +1222,7 @@ int open_ubd_file(char *file, struct openflags *openflags, int shared,
 		}
 	}
 
-	/* Succesful return case! */
+	/* Successful return case! */
 	if(backing_file_out == NULL)
 		return(fd);
 

arch/x86_64/kernel/i8259.c

@@ -278,7 +278,7 @@ static void mask_and_ack_8259A(unsigned int irq)
 	 * Lightweight spurious IRQ detection. We do not want
 	 * to overdo spurious IRQ handling - it's usually a sign
 	 * of hardware problems, so we only do the checks we can
-	 * do without slowing down good hardware unnecesserily.
+	 * do without slowing down good hardware unnecessarily.
 	 *
 	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
 	 * usually resulting from the 8259A-1|2 PICs) occur

block/as-iosched.c

@@ -892,7 +892,7 @@ static int as_can_break_anticipation(struct as_data *ad, struct as_rq *arq)
 }
 
 /*
- * as_can_anticipate indicates weather we should either run arq
+ * as_can_anticipate indicates whether we should either run arq
  * or keep anticipating a better request.
  */
 static int as_can_anticipate(struct as_data *ad, struct as_rq *arq)

block/ll_rw_blk.c

@@ -2745,7 +2745,7 @@ static int attempt_merge(request_queue_t *q, struct request *req,
 		return 0;
 
 	/*
-	 * not contigious
+	 * not contiguous
 	 */
 	if (req->sector + req->nr_sectors != next->sector)
 		return 0;
@@ -3415,7 +3415,7 @@ static struct notifier_block blk_cpu_notifier = {
  *
  * Description:
  *     Ends all I/O on a request. It does not handle partial completions,
- *     unless the driver actually implements this in its completionc callback
+ *     unless the driver actually implements this in its completion callback
  *     through requeueing. Theh actual completion happens out-of-order,
  *     through a softirq handler. The user must have registered a completion
  *     callback through blk_queue_softirq_done().

drivers/atm/firestream.c

@@ -951,7 +951,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
 		   it most likely that the chip will notice it. It also prevents us
 		   from having to wait for completion. On the other hand, we may
 		   need to wait for completion anyway, to see if it completed
-		   succesfully. */
+		   successfully. */
 
 		switch (atm_vcc->qos.aal) {
 		case ATM_AAL2:

drivers/char/agp/amd-k7-agp.c

@@ -118,7 +118,7 @@ static int amd_create_gatt_pages(int nr_tables)
 	return retval;
 }
 
-/* Since we don't need contigious memory we just try
+/* Since we don't need contiguous memory we just try
  * to get the gatt table once
  */
 

drivers/char/agp/ati-agp.c

@@ -261,7 +261,7 @@ static int agp_ati_suspend(struct pci_dev *dev, pm_message_t state)
 #endif
 
 /*
- *Since we don't need contigious memory we just try
+ *Since we don't need contiguous memory we just try
  * to get the gatt table once
  */
 

drivers/char/agp/efficeon-agp.c

@@ -177,7 +177,7 @@ static int efficeon_free_gatt_table(struct agp_bridge_data *bridge)
 
 
 /*
- * Since we don't need contigious memory we just try
+ * Since we don't need contiguous memory we just try
  * to get the gatt table once
  */
 

drivers/char/rio/riointr.c

@@ -546,7 +546,7 @@ static void RIOReceive(struct rio_info *p, struct Port *PortP)
 	 ** run out of space it will be set to the offset of the
 	 ** next byte to copy from the packet data area. The packet
 	 ** length field is decremented by the number of bytes that
-	 ** we succesfully removed from the packet. When this reaches
+	 ** we successfully removed from the packet. When this reaches
 	 ** zero, we reset the offset pointer to be zero, and free
 	 ** the packet from the front of the queue.
 	 */

drivers/hwmon/asb100.c

@@ -341,7 +341,7 @@ static ssize_t set_fan_min(struct device *dev, const char *buf,
 
 /* Note: we save and restore the fan minimum here, because its value is
    determined in part by the fan divisor.  This follows the principle of
-   least suprise; the user doesn't expect the fan minimum to change just
+   least surprise; the user doesn't expect the fan minimum to change just
    because the divisor changed. */
 static ssize_t set_fan_div(struct device *dev, const char *buf,
 				size_t count, int nr)

drivers/hwmon/lm78.c

@@ -358,7 +358,7 @@ static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
 
 /* Note: we save and restore the fan minimum here, because its value is
    determined in part by the fan divisor.  This follows the principle of
-   least suprise; the user doesn't expect the fan minimum to change just
+   least surprise; the user doesn't expect the fan minimum to change just
    because the divisor changed. */
 static ssize_t set_fan_div(struct device *dev, const char *buf,
 	size_t count, int nr)

drivers/hwmon/lm80.c

@@ -253,7 +253,7 @@ set_fan(min2, fan_min[1], LM80_REG_FAN_MIN(2), fan_div[1]);
 
 /* Note: we save and restore the fan minimum here, because its value is
    determined in part by the fan divisor.  This follows the principle of
-   least suprise; the user doesn't expect the fan minimum to change just
+   least surprise; the user doesn't expect the fan minimum to change just
    because the divisor changed. */
 static ssize_t set_fan_div(struct device *dev, const char *buf,
 	size_t count, int nr)

drivers/hwmon/lm87.c

@@ -421,7 +421,7 @@ static void set_fan_min(struct device *dev, const char *buf, int nr)
 
 /* Note: we save and restore the fan minimum here, because its value is
    determined in part by the fan clock divider.  This follows the principle
-   of least suprise; the user doesn't expect the fan minimum to change just
+   of least surprise; the user doesn't expect the fan minimum to change just
    because the divider changed. */
 static ssize_t set_fan_div(struct device *dev, const char *buf,
 		size_t count, int nr)

drivers/hwmon/sis5595.c

@@ -380,7 +380,7 @@ static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
 
 /* Note: we save and restore the fan minimum here, because its value is
    determined in part by the fan divisor.  This follows the principle of
-   least suprise; the user doesn't expect the fan minimum to change just
+   least surprise; the user doesn't expect the fan minimum to change just
    because the divisor changed. */
 static ssize_t set_fan_div(struct device *dev, const char *buf,
 	size_t count, int nr)