Skip to content

GitLab

Commit 9135f190 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (95 commits)
  ide-tape: remove idetape_config_t typedef
  ide-tape: remove mtio.h related comments
  ide-tape: make function name more accurate
  ide-tape: remove unused sense packet commands.
  ide-tape: use generic byteorder macros
  ide-tape: remove EXPERIMENTAL driver status
  ide-tape: use generic scsi commands
  ide-tape: remove struct idetape_block_size_page_t
  ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t
  ide-tape: remove struct idetape_parameter_block_descriptor_t
  ide-tape: remove struct idetape_medium_partition_page_t
  ide-tape: remove struct idetape_data_compression_page_t
  ide-tape: remove struct idetape_inquiry_result_t
  ide-tape: remove struct idetape_capabilities_page_t
  ide-tape: remove IDETAPE_DEBUG_BUGS
  ide-tape: remove IDETAPE_DEBUG_INFO
  ide-tape: dump gcw fields on error in idetape_identify_device()
  ide-tape: remove struct idetape_mode_parameter_header_t
  ide-tape: remove struct idetape_request_sense_result_t
  ide-tape: remove dead code
  ...
parents 124d3b70 d59823fa
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1469 additions and 2193 deletions
Documentation/ide/ChangeLog.ide-tape.1995-2002 0 → 100644
View file @ 9135f190
/*
* Ver 0.1 Nov 1 95 Pre-working code :-)
* Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure
* was successful ! (Using tar cvf ... on the block
* device interface).
* A longer backup resulted in major swapping, bad
* overall Linux performance and eventually failed as
* we received non serial read-ahead requests from the
* buffer cache.
* Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the
* character device interface. Linux's responsiveness
* and performance doesn't seem to be much affected
* from the background backup procedure.
* Some general mtio.h magnetic tape operations are
* now supported by our character device. As a result,
* popular tape utilities are starting to work with
* ide tapes :-)
* The following configurations were tested:
* 1. An IDE ATAPI TAPE shares the same interface
* and irq with an IDE ATAPI CDROM.
* 2. An IDE ATAPI TAPE shares the same interface
* and irq with a normal IDE disk.
* Both configurations seemed to work just fine !
* However, to be on the safe side, it is meanwhile
* recommended to give the IDE TAPE its own interface
* and irq.
* The one thing which needs to be done here is to
* add a "request postpone" feature to ide.c,
* so that we won't have to wait for the tape to finish
* performing a long media access (DSC) request (such
* as a rewind) before we can access the other device
* on the same interface. This effect doesn't disturb
* normal operation most of the time because read/write
* requests are relatively fast, and once we are
* performing one tape r/w request, a lot of requests
* from the other device can be queued and ide.c will
* service all of them after this single tape request.
* Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree.
* On each read / write request, we now ask the drive
* if we can transfer a constant number of bytes
* (a parameter of the drive) only to its buffers,
* without causing actual media access. If we can't,
* we just wait until we can by polling the DSC bit.
* This ensures that while we are not transferring
* more bytes than the constant referred to above, the
* interrupt latency will not become too high and
* we won't cause an interrupt timeout, as happened
* occasionally in the previous version.
* While polling for DSC, the current request is
* postponed and ide.c is free to handle requests from
* the other device. This is handled transparently to
* ide.c. The hwgroup locking method which was used
* in the previous version was removed.
* Use of new general features which are provided by
* ide.c for use with atapi devices.
* (Programming done by Mark Lord)
* Few potential bug fixes (Again, suggested by Mark)
* Single character device data transfers are now
* not limited in size, as they were before.
* We are asking the tape about its recommended
* transfer unit and send a larger data transfer
* as several transfers of the above size.
* For best results, use an integral number of this
* basic unit (which is shown during driver
* initialization). I will soon add an ioctl to get
* this important parameter.
* Our data transfer buffer is allocated on startup,
* rather than before each data transfer. This should
* ensure that we will indeed have a data buffer.
* Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape
* shared an interface with another device.
* (poll_for_dsc was a complete mess).
* Removed some old (non-active) code which had
* to do with supporting buffer cache originated
* requests.
* The block device interface can now be opened, so
* that general ide driver features like the unmask
* interrupts flag can be selected with an ioctl.
* This is the only use of the block device interface.
* New fast pipelined operation mode (currently only on
* writes). When using the pipelined mode, the
* throughput can potentially reach the maximum
* tape supported throughput, regardless of the
* user backup program. On my tape drive, it sometimes
* boosted performance by a factor of 2. Pipelined
* mode is enabled by default, but since it has a few
* downfalls as well, you may want to disable it.
* A short explanation of the pipelined operation mode
* is available below.
* Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition.
* Added pipeline read mode. As a result, restores
* are now as fast as backups.
* Optimized shared interface behavior. The new behavior
* typically results in better IDE bus efficiency and
* higher tape throughput.
* Pre-calculation of the expected read/write request
* service time, based on the tape's parameters. In
* the pipelined operation mode, this allows us to
* adjust our polling frequency to a much lower value,
* and thus to dramatically reduce our load on Linux,
* without any decrease in performance.
* Implemented additional mtio.h operations.
* The recommended user block size is returned by
* the MTIOCGET ioctl.
* Additional minor changes.
* Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the
* use of some block sizes during a restore procedure.
* The character device interface will now present a
* continuous view of the media - any mix of block sizes
* during a backup/restore procedure is supported. The
* driver will buffer the requests internally and
* convert them to the tape's recommended transfer
* unit, making performance almost independent of the
* chosen user block size.
* Some improvements in error recovery.
* By cooperating with ide-dma.c, bus mastering DMA can
* now sometimes be used with IDE tape drives as well.
* Bus mastering DMA has the potential to dramatically
* reduce the CPU's overhead when accessing the device,
* and can be enabled by using hdparm -d1 on the tape's
* block device interface. For more info, read the
* comments in ide-dma.c.
* Ver 1.4 Mar 13 96 Fixed serialize support.
* Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85.
* Fixed pipelined read mode inefficiency.
* Fixed nasty null dereferencing bug.
* Ver 1.6 Aug 16 96 Fixed FPU usage in the driver.
* Fixed end of media bug.
* Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model.
* Ver 1.8 Sep 26 96 Attempt to find a better balance between good
* interactive response and high system throughput.
* Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather
* than requiring an explicit FSF command.
* Abort pending requests at end of media.
* MTTELL was sometimes returning incorrect results.
* Return the real block size in the MTIOCGET ioctl.
* Some error recovery bug fixes.
* Ver 1.10 Nov 5 96 Major reorganization.
* Reduced CPU overhead a bit by eliminating internal
* bounce buffers.
* Added module support.
* Added multiple tape drives support.
* Added partition support.
* Rewrote DSC handling.
* Some portability fixes.
* Removed ide-tape.h.
* Additional minor changes.
* Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling.
* Use ide_stall_queue() for DSC overlap.
* Use the maximum speed rather than the current speed
* to compute the request service time.
* Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data
* corruption, which could occur if the total number
* of bytes written to the tape was not an integral
* number of tape blocks.
* Add support for INTERRUPT DRQ devices.
* Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB
* Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives.
* Replace cli()/sti() with hwgroup spinlocks.
* Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup
* spinlock with private per-tape spinlock.
* Ver 1.16 Sep 1 99 Add OnStream tape support.
* Abort read pipeline on EOD.
* Wait for the tape to become ready in case it returns
* "in the process of becoming ready" on open().
* Fix zero padding of the last written block in
* case the tape block size is larger than PAGE_SIZE.
* Decrease the default disconnection time to tn.
* Ver 1.16e Oct 3 99 Minor fixes.
* Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen,
* niessen@iae.nl / arnold.niessen@philips.com
* GO-1) Undefined code in idetape_read_position
* according to Gadi's email
* AJN-1) Minor fix asc == 11 should be asc == 0x11
* in idetape_issue_packet_command (did effect
* debugging output only)
* AJN-2) Added more debugging output, and
* added ide-tape: where missing. I would also
* like to add tape->name where possible
* AJN-3) Added different debug_level's
* via /proc/ide/hdc/settings
* "debug_level" determines amount of debugging output;
* can be changed using /proc/ide/hdx/settings
* 0 : almost no debugging output
* 1 : 0+output errors only
* 2 : 1+output all sensekey/asc
* 3 : 2+follow all chrdev related procedures
* 4 : 3+follow all procedures
* 5 : 4+include pc_stack rq_stack info
* 6 : 5+USE_COUNT updates
* AJN-4) Fixed timeout for retension in idetape_queue_pc_tail
* from 5 to 10 minutes
* AJN-5) Changed maximum number of blocks to skip when
* reading tapes with multiple consecutive write
* errors from 100 to 1000 in idetape_get_logical_blk
* Proposed changes to code:
* 1) output "logical_blk_num" via /proc
* 2) output "current_operation" via /proc
* 3) Either solve or document the fact that `mt rewind' is
* required after reading from /dev/nhtx to be
* able to rmmod the idetape module;
* Also, sometimes an application finishes but the
* device remains `busy' for some time. Same cause ?
* Proposed changes to release-notes:
* 4) write a simple `quickstart' section in the
* release notes; I volunteer if you don't want to
* 5) include a pointer to video4linux in the doc
* to stimulate video applications
* 6) release notes lines 331 and 362: explain what happens
* if the application data rate is higher than 1100 KB/s;
* similar approach to lower-than-500 kB/s ?
* 7) 6.6 Comparison; wouldn't it be better to allow different
* strategies for read and write ?
* Wouldn't it be better to control the tape buffer
* contents instead of the bandwidth ?
* 8) line 536: replace will by would (if I understand
* this section correctly, a hypothetical and unwanted situation
* is being described)
* Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames.
* Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl
* - Add idetape_onstream_mode_sense_tape_parameter_page
* function to get tape capacity in frames: tape->capacity.
* - Add support for DI-50 drives( or any DI- drive).
* - 'workaround' for read error/blank block around block 3000.
* - Implement Early warning for end of media for Onstream.
* - Cosmetic code changes for readability.
* - Idetape_position_tape should not use SKIP bit during
* Onstream read recovery.
* - Add capacity, logical_blk_num and first/last_frame_position
* to /proc/ide/hd?/settings.
* - Module use count was gone in the Linux 2.4 driver.
* Ver 1.17a Apr 2001 Willem Riede osst@riede.org
* - Get drive's actual block size from mode sense block descriptor
* - Limit size of pipeline
* Ver 1.17b Oct 2002 Alan Stern <stern@rowland.harvard.edu>
* Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used
* it in the code!
* Actually removed aborted stages in idetape_abort_pipeline
* instead of just changing the command code.
* Made the transfer byte count for Request Sense equal to the
* actual length of the data transfer.
* Changed handling of partial data transfers: they do not
* cause DMA errors.
* Moved initiation of DMA transfers to the correct place.
* Removed reference to unallocated memory.
* Made __idetape_discard_read_pipeline return the number of
* sectors skipped, not the number of stages.
* Replaced errant kfree() calls with __idetape_kfree_stage().
* Fixed off-by-one error in testing the pipeline length.
* Fixed handling of filemarks in the read pipeline.
* Small code optimization for MTBSF and MTBSFM ioctls.
* Don't try to unlock the door during device close if is
* already unlocked!
* Cosmetic fixes to miscellaneous debugging output messages.
* Set the minimum /proc/ide/hd?/settings values for "pipeline",
* "pipeline_min", and "pipeline_max" to 1.
*/
Documentation/ide/ide-tape.txt 0 → 100644
View file @ 9135f190
/*
* IDE ATAPI streaming tape driver.
*
* This driver is a part of the Linux ide driver.
*
* The driver, in co-operation with ide.c, basically traverses the
* request-list for the block device interface. The character device
* interface, on the other hand, creates new requests, adds them
* to the request-list of the block device, and waits for their completion.
*
* Pipelined operation mode is now supported on both reads and writes.
*
* The block device major and minor numbers are determined from the
* tape's relative position in the ide interfaces, as explained in ide.c.
*
* The character device interface consists of the following devices:
*
* ht0 major 37, minor 0 first IDE tape, rewind on close.
* ht1 major 37, minor 1 second IDE tape, rewind on close.
* ...
* nht0 major 37, minor 128 first IDE tape, no rewind on close.
* nht1 major 37, minor 129 second IDE tape, no rewind on close.
* ...
*
* The general magnetic tape commands compatible interface, as defined by
* include/linux/mtio.h, is accessible through the character device.
*
* General ide driver configuration options, such as the interrupt-unmask
* flag, can be configured by issuing an ioctl to the block device interface,
* as any other ide device.
*
* Our own ide-tape ioctl's can be issued to either the block device or
* the character device interface.
*
* Maximal throughput with minimal bus load will usually be achieved in the
* following scenario:
*
* 1. ide-tape is operating in the pipelined operation mode.
* 2. No buffering is performed by the user backup program.
*
* Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive.
*
* Here are some words from the first releases of hd.c, which are quoted
* in ide.c and apply here as well:
*
* | Special care is recommended. Have Fun!
*
*
* An overview of the pipelined operation mode.
*
* In the pipelined write mode, we will usually just add requests to our
* pipeline and return immediately, before we even start to service them. The
* user program will then have enough time to prepare the next request while
* we are still busy servicing previous requests. In the pipelined read mode,
* the situation is similar - we add read-ahead requests into the pipeline,
* before the user even requested them.
*
* The pipeline can be viewed as a "safety net" which will be activated when
* the system load is high and prevents the user backup program from keeping up
* with the current tape speed. At this point, the pipeline will get
* shorter and shorter but the tape will still be streaming at the same speed.
* Assuming we have enough pipeline stages, the system load will hopefully
* decrease before the pipeline is completely empty, and the backup program
* will be able to "catch up" and refill the pipeline again.
*
* When using the pipelined mode, it would be best to disable any type of
* buffering done by the user program, as ide-tape already provides all the
* benefits in the kernel, where it can be done in a more efficient way.
* As we will usually not block the user program on a request, the most
* efficient user code will then be a simple read-write-read-... cycle.
* Any additional logic will usually just slow down the backup process.
*
* Using the pipelined mode, I get a constant over 400 KBps throughput,
* which seems to be the maximum throughput supported by my tape.
*
* However, there are some downfalls:
*
* 1. We use memory (for data buffers) in proportional to the number
* of pipeline stages (each stage is about 26 KB with my tape).
* 2. In the pipelined write mode, we cheat and postpone error codes
* to the user task. In read mode, the actual tape position
* will be a bit further than the last requested block.
*
* Concerning (1):
*
* 1. We allocate stages dynamically only when we need them. When
* we don't need them, we don't consume additional memory. In
* case we can't allocate stages, we just manage without them
* (at the expense of decreased throughput) so when Linux is
* tight in memory, we will not pose additional difficulties.
*
* 2. The maximum number of stages (which is, in fact, the maximum
* amount of memory) which we allocate is limited by the compile
* time parameter IDETAPE_MAX_PIPELINE_STAGES.
*
* 3. The maximum number of stages is a controlled parameter - We
* don't start from the user defined maximum number of stages
* but from the lower IDETAPE_MIN_PIPELINE_STAGES (again, we
* will not even allocate this amount of stages if the user
* program can't handle the speed). We then implement a feedback
* loop which checks if the pipeline is empty, and if it is, we
* increase the maximum number of stages as necessary until we
* reach the optimum value which just manages to keep the tape
* busy with minimum allocated memory or until we reach
* IDETAPE_MAX_PIPELINE_STAGES.
*
* Concerning (2):
*
* In pipelined write mode, ide-tape can not return accurate error codes
* to the user program since we usually just add the request to the
* pipeline without waiting for it to be serviced. In case an error
* occurs, I will report it on the next user request.
*
* In the pipelined read mode, subsequent read requests or forward
* filemark spacing will perform correctly, as we preserve all blocks
* and filemarks which we encountered during our excess read-ahead.
*
* For accurate tape positioning and error reporting, disabling
* pipelined mode might be the best option.
*
* You can enable/disable/tune the pipelined operation mode by adjusting
* the compile time parameters below.
*
*
* Possible improvements.
*
* 1. Support for the ATAPI overlap protocol.
*
* In order to maximize bus throughput, we currently use the DSC
* overlap method which enables ide.c to service requests from the
* other device while the tape is busy executing a command. The
* DSC overlap method involves polling the tape's status register
* for the DSC bit, and servicing the other device while the tape
* isn't ready.
*
* In the current QIC development standard (December 1995),
* it is recommended that new tape drives will *in addition*
* implement the ATAPI overlap protocol, which is used for the
* same purpose - efficient use of the IDE bus, but is interrupt
* driven and thus has much less CPU overhead.
*
* ATAPI overlap is likely to be supported in most new ATAPI
* devices, including new ATAPI cdroms, and thus provides us
* a method by which we can achieve higher throughput when
* sharing a (fast) ATA-2 disk with any (slow) new ATAPI device.
*/
drivers/ide/Kconfig
View file @ 9135f190
......@@ -216,8 +216,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS
memory, though.
config BLK_DEV_IDETAPE
tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
depends on EXPERIMENTAL
tristate "Include IDE/ATAPI TAPE support"
help
If you have an IDE tape drive using the ATAPI protocol, say Y.
ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
......
drivers/ide/arm/bast-ide.c
View file @ 9135f190
......@@ -28,8 +28,10 @@ static int __init
bastide_register(unsigned int base, unsigned int aux, int irq,
ide_hwif_t **hwif)
{
ide_hwif_t *hwif;
hw_regs_t hw;
int i;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
memset(&hw, 0, sizeof(hw));
......@@ -44,8 +46,24 @@ bastide_register(unsigned int base, unsigned int aux, int irq,
hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20);
hw.irq = irq;
ide_register_hw(&hw, NULL, hwif);
hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
goto out;
i = hwif->index;
if (hwif->present)
ide_unregister(i, 0, 0);
else if (!hwif->hold)
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
hwif->quirkproc = NULL;
idx[0] = i;
ide_device_add(idx, NULL);
out:
return 0;
}
......
drivers/ide/arm/icside.c
View file @ 9135f190
......@@ -377,9 +377,6 @@ static void icside_dma_lost_irq(ide_drive_t *drive)
static void icside_dma_init(ide_hwif_t *hwif)
{
hwif->mwdma_mask = 7; /* MW0..2 */
hwif->swdma_mask = 7; /* SW0..2 */
hwif->dmatable_cpu = NULL;
hwif->dmatable_dma = 0;
hwif->set_dma_mode = icside_set_dma_mode;
......@@ -459,11 +456,19 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
idx[0] = hwif->index;
ide_device_add(idx);
ide_device_add(idx, NULL);
return 0;
}
static const struct ide_port_info icside_v6_port_info __initdata = {
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
IDE_HFLAG_NO_AUTOTUNE,
.mwdma_mask = ATA_MWDMA2,
.swdma_mask = ATA_SWDMA2,
};
static int __init
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
......@@ -472,6 +477,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
unsigned int sel = 0;
int ret;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
struct ide_port_info d = icside_v6_port_info;
ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!ioc_base) {
......@@ -521,30 +527,25 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
state->hwif[1] = mate;
hwif->maskproc = icside_maskproc;
hwif->channel = 0;
hwif->hwif_data = state;
hwif->mate = mate;
hwif->serialized = 1;
hwif->config_data = (unsigned long)ioc_base;
hwif->select_data = sel;
mate->maskproc = icside_maskproc;
mate->channel = 1;
mate->hwif_data = state;
mate->mate = hwif;
mate->serialized = 1;
mate->config_data = (unsigned long)ioc_base;
mate->select_data = sel | 1;
if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) {
icside_dma_init(hwif);
icside_dma_init(mate);
}
} else
d.mwdma_mask = d.swdma_mask = 0;
idx[0] = hwif->index;
idx[1] = mate->index;
ide_device_add(idx);
ide_device_add(idx, &d);
return 0;
......
drivers/ide/arm/ide_arm.c
View file @ 9135f190
......@@ -39,7 +39,7 @@ static int __init ide_arm_init(void)
ide_init_port_hw(hwif, &hw);
idx[0] = hwif->index;
ide_device_add(idx);
ide_device_add(idx, NULL);
}
return 0;
......
drivers/ide/arm/rapide.c
View file @ 9135f190
......@@ -58,7 +58,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
idx[0] = hwif->index;
ide_device_add(idx);
ide_device_add(idx, NULL);
ecard_set_drvdata(ec, hwif);
goto out;
......@@ -76,7 +76,7 @@ static void __devexit rapide_remove(struct expansion_card *ec)
ecard_set_drvdata(ec, NULL);
ide_unregister(hwif->index);
ide_unregister(hwif->index, 0, 0);
ecard_release_resources(ec);
}
......
drivers/ide/cris/ide-cris.c
View file @ 9135f190
......@@ -753,6 +753,15 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
}
static const struct ide_port_info cris_port_info __initdata = {
.chipset = ide_etrax100,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_NO_DMA, /* no SFF-style DMA */
.pio_mask = ATA_PIO4,
.udma_mask = cris_ultra_mask,
.mwdma_mask = ATA_MWDMA2,
};
static int __init init_e100_ide(void)
{
hw_regs_t hw;
......@@ -780,7 +789,6 @@ static int __init init_e100_ide(void)
ide_init_port_data(hwif, hwif->index);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
hwif->chipset = ide_etrax100;
hwif->set_pio_mode = &cris_set_pio_mode;
hwif->set_dma_mode = &cris_set_dma_mode;
hwif->ata_input_data = &cris_ide_input_data;
......@@ -799,12 +807,6 @@ static int __init init_e100_ide(void)
hwif->INB = &cris_ide_inb;
hwif->INW = &cris_ide_inw;
hwif->cbl = ATA_CBL_PATA40;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
hwif->pio_mask = ATA_PIO4,
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
hwif->ultra_mask = cris_ultra_mask;
hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
idx[h] = hwif->index;
}
......@@ -820,7 +822,7 @@ static int __init init_e100_ide(void)
cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD);
cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
ide_device_add(idx);
ide_device_add(idx, &cris_port_info);
return 0;
}
......@@ -1032,11 +1034,7 @@ static int cris_dma_setup(ide_drive_t *drive)
static void cris_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
/* set the irq handler which will finish the request when DMA is done */
ide_set_handler(drive, &cris_dma_intr, WAIT_CMD, NULL);
/* issue cmd to drive */
cris_ide_outb(command, IDE_COMMAND_REG);
ide_execute_command(drive, command, &cris_dma_intr, WAIT_CMD, NULL);
}
static void cris_dma_start(ide_drive_t *drive)
......
drivers/ide/h8300/ide-h8300.c
View file @ 9135f190
......@@ -114,7 +114,7 @@ static int __init h8300_ide_init(void)
idx[0] = index;
ide_device_add(idx);
ide_device_add(idx, NULL);
return 0;
......
drivers/ide/ide-acpi.c
View file @ 9135f190
......@@ -39,7 +39,6 @@ struct GTM_buffer {
};
struct ide_acpi_drive_link {
ide_drive_t *drive;
acpi_handle obj_handle;
u8 idbuff[512];
};
......@@ -280,16 +279,6 @@ static int do_drive_get_GTF(ide_drive_t *drive,
port = hwif->channel ? drive->dn - 2: drive->dn;
if (!drive->acpidata) {
if (port == 0) {
drive->acpidata = &hwif->acpidata->master;
hwif->acpidata->master.drive = drive;
} else {
drive->acpidata = &hwif->acpidata->slave;
hwif->acpidata->slave.drive = drive;
}
}
DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
hwif->name, dev->bus_id, port, hwif->channel);
......@@ -494,7 +483,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive)
return ret;
}
EXPORT_SYMBOL_GPL(ide_acpi_exec_tfs);
/**
* ide_acpi_get_timing - get the channel (controller) timings
......@@ -580,7 +568,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif)
kfree(output.pointer);
}
EXPORT_SYMBOL_GPL(ide_acpi_get_timing);
/**
* ide_acpi_push_timing - set the channel (controller) timings
......@@ -634,7 +621,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif)
}
DEBPRINT("_STM status: %d\n", status);
}
EXPORT_SYMBOL_GPL(ide_acpi_push_timing);
/**
* ide_acpi_set_state - set the channel power state
......@@ -688,11 +674,6 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
*/
void ide_acpi_init(ide_hwif_t *hwif)
{
int unit;
int err;
struct ide_acpi_drive_link *master;
struct ide_acpi_drive_link *slave;
ide_acpi_blacklist();
hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
......@@ -704,40 +685,38 @@ void ide_acpi_init(ide_hwif_t *hwif)
DEBPRINT("no ACPI object for %s found\n", hwif->name);
kfree(hwif->acpidata);
hwif->acpidata = NULL;
return;
}
}
void ide_acpi_port_init_devices(ide_hwif_t *hwif)
{
ide_drive_t *drive;
int i, err;
if (hwif->acpidata == NULL)
return;
/*
* The ACPI spec mandates that we send information
* for both drives, regardless whether they are connected
* or not.
*/
hwif->acpidata->master.drive = &hwif->drives[0];
hwif->drives[0].acpidata = &hwif->acpidata->master;
master = &hwif->acpidata->master;
hwif->acpidata->slave.drive = &hwif->drives[1];
hwif->drives[1].acpidata = &hwif->acpidata->slave;
slave = &hwif->acpidata->slave;
/*
* Send IDENTIFY for each drive
*/
if (master->drive->present) {
err = taskfile_lib_get_identify(master->drive, master->idbuff);
if (err) {
DEBPRINT("identify device %s failed (%d)\n",
master->drive->name, err);
}
}
for (i = 0; i < MAX_DRIVES; i++) {
drive = &hwif->drives[i];
if (!drive->present)
continue;
if (slave->drive->present) {
err = taskfile_lib_get_identify(slave->drive, slave->idbuff);
if (err) {
err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff);
if (err)
DEBPRINT("identify device %s failed (%d)\n",
slave->drive->name, err);
}
drive->name, err);
}
if (ide_noacpionboot) {
......@@ -753,13 +732,11 @@ void ide_acpi_init(ide_hwif_t *hwif)
ide_acpi_get_timing(hwif);
ide_acpi_push_timing(hwif);
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
for (i = 0; i < MAX_DRIVES; i++) {
drive = &hwif->drives[i];
if (drive->present) {
if (drive->present)
/* Execute ACPI startup code */
ide_acpi_exec_tfs(drive);
}
}
}
EXPORT_SYMBOL_GPL(ide_acpi_init);
drivers/ide/ide-cd.c
View file @ 9135f190
......@@ -604,8 +604,6 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
* Block read functions.
*/
typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len)
{
while (len > 0) {
......
drivers/ide/ide-dma.c
View file @ 9135f190
......@@ -819,6 +819,26 @@ int ide_set_dma(ide_drive_t *drive)
return 0;
}
void ide_check_dma_crc(ide_drive_t *drive)
{
u8 mode;
ide_dma_off_quietly(drive);
drive->crc_count = 0;
mode = drive->current_speed;
/*
* Don't try non Ultra-DMA modes without iCRC's. Force the
* device to PIO and make the user enable SWDMA/MWDMA modes.
*/
if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7)
mode--;
else
mode = XFER_PIO_4;
ide_set_xfer_rate(drive, mode);
if (drive->current_speed >= XFER_SW_DMA_0)
ide_dma_on(drive);
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
void ide_dma_lost_irq (ide_drive_t *drive)
{
......
drivers/ide/ide-floppy.c
View file @ 9135f190
This diff is collapsed.
drivers/ide/ide-generic.c
View file @ 9135f190
......@@ -23,7 +23,7 @@ static int __init ide_generic_init(void)
for (i = 0; i < MAX_HWIFS; i++)
idx[i] = ide_hwifs[i].present ? 0xff : i;
ide_device_add_all(idx);
ide_device_add_all(idx, NULL);
if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET])
ide_release_lock(); /* for atari only */
......
drivers/ide/ide-iops.c
View file @ 9135f190
......@@ -163,8 +163,6 @@ void SELECT_DRIVE (ide_drive_t *drive)
HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG);
}
EXPORT_SYMBOL(SELECT_DRIVE);
void SELECT_MASK (ide_drive_t *drive, int mask)
{
if (HWIF(drive)->maskproc)
......@@ -614,66 +612,6 @@ u8 eighty_ninty_three (ide_drive_t *drive)
return 0;
}
int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
{
if (args->tf.command == WIN_SETFEATURES &&
args->tf.nsect > XFER_UDMA_2 &&
args->tf.feature == SETFEATURES_XFER) {
if (eighty_ninty_three(drive) == 0) {
printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
"be set\n", drive->name);
return 1;
}
}
return 0;
}
/*
* Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
* 1 : Safe to update drive->id DMA registers.
* 0 : OOPs not allowed.
*/
int set_transfer (ide_drive_t *drive, ide_task_t *args)
{
if (args->tf.command == WIN_SETFEATURES &&
args->tf.nsect >= XFER_SW_DMA_0 &&
args->tf.feature == SETFEATURES_XFER &&
(drive->id->dma_ultra ||
drive->id->dma_mword ||
drive->id->dma_1word))
return 1;
return 0;
}
#ifdef CONFIG_BLK_DEV_IDEDMA
static u8 ide_auto_reduce_xfer (ide_drive_t *drive)
{
if (!drive->crc_count)
return drive->current_speed;
drive->crc_count = 0;
switch(drive->current_speed) {
case XFER_UDMA_7: return XFER_UDMA_6;
case XFER_UDMA_6: return XFER_UDMA_5;
case XFER_UDMA_5: return XFER_UDMA_4;
case XFER_UDMA_4: return XFER_UDMA_3;
case XFER_UDMA_3: return XFER_UDMA_2;
case XFER_UDMA_2: return XFER_UDMA_1;
case XFER_UDMA_1: return XFER_UDMA_0;
/*
* OOPS we do not goto non Ultra DMA modes
* without iCRC's available we force
* the system to PIO and make the user
* invoke the ATA-1 ATA-2 DMA modes.
*/
case XFER_UDMA_0:
default: return XFER_PIO_4;
}
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
int ide_driveid_update(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
......@@ -882,22 +820,17 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
unsigned long flags;
ide_hwgroup_t *hwgroup = HWGROUP(drive);
ide_hwif_t *hwif = HWIF(drive);
spin_lock_irqsave(&ide_lock, flags);
BUG_ON(hwgroup->handler);
hwgroup->handler = handler;
hwgroup->expiry = expiry;
hwgroup->timer.expires = jiffies + timeout;
hwgroup->req_gen_timer = hwgroup->req_gen;
add_timer(&hwgroup->timer);
__ide_set_handler(drive, handler, timeout, expiry);
hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG);
/* Drive takes 400nS to respond, we must avoid the IRQ being
serviced before that.
FIXME: we could skip this delay with care on non shared
devices
*/
/*
* Drive takes 400nS to respond, we must avoid the IRQ being
* serviced before that.
*
* FIXME: we could skip this delay with care on non shared devices
*/
ndelay(400);
spin_unlock_irqrestore(&ide_lock, flags);
}
......@@ -1005,19 +938,6 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
return ide_stopped;
}
static void check_dma_crc(ide_drive_t *drive)
{
#ifdef CONFIG_BLK_DEV_IDEDMA
if (drive->crc_count) {
ide_dma_off_quietly(drive);
ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive));
if (drive->current_speed >= XFER_SW_DMA_0)
ide_dma_on(drive);
} else
ide_dma_off(drive);
#endif
}
static void ide_disk_pre_reset(ide_drive_t *drive)
{
int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1;
......@@ -1039,17 +959,20 @@ static void pre_reset(ide_drive_t *drive)
else
drive->post_reset = 1;
if (drive->using_dma) {
if (drive->crc_count)
ide_check_dma_crc(drive);
else
ide_dma_off(drive);
}
if (!drive->keep_settings) {
if (drive->using_dma) {
check_dma_crc(drive);
} else {
if (!drive->using_dma) {
drive->unmask = 0;
drive->io_32bit = 0;
}
return;
}
if (drive->using_dma)
check_dma_crc(drive);
if (HWIF(drive)->pre_reset != NULL)
HWIF(drive)->pre_reset(drive);
......
drivers/ide/ide-pnp.c
View file @ 9135f190
......@@ -49,7 +49,7 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id
printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index);
pnp_set_drvdata(dev,hwif);
ide_device_add(idx);
ide_device_add(idx, NULL);
return 0;
}
......@@ -60,9 +60,10 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id
static void idepnp_remove(struct pnp_dev * dev)
{
ide_hwif_t *hwif = pnp_get_drvdata(dev);
if (hwif) {
ide_unregister(hwif->index);
} else
if (hwif)
ide_unregister(hwif->index, 0, 0);
else
printk(KERN_ERR "idepnp: Unable to remove device, please report.\n");
}
......
drivers/ide/ide-probe.c
View file @ 9135f190
......@@ -423,8 +423,9 @@ static int ide_busy_sleep(ide_hwif_t *hwif)
static int do_probe (ide_drive_t *drive, u8 cmd)
{
int rc;
ide_hwif_t *hwif = HWIF(drive);
int rc;
u8 stat;
if (drive->present) {
/* avoid waiting for inappropriate probes */
......@@ -461,15 +462,17 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
/* failed: try again */
rc = try_to_identify(drive,cmd);
}
if (hwif->INB(IDE_STATUS_REG) == (BUSY_STAT|READY_STAT))
stat = hwif->INB(IDE_STATUS_REG);
if (stat == (BUSY_STAT | READY_STAT))
return 4;
if ((rc == 1 && cmd == WIN_PIDENTIFY) &&
((drive->autotune == IDE_TUNE_DEFAULT) ||
(drive->autotune == IDE_TUNE_AUTO))) {
printk("%s: no response (status = 0x%02x), "
"resetting drive\n", drive->name,
hwif->INB(IDE_STATUS_REG));
printk(KERN_ERR "%s: no response (status = 0x%02x), "
"resetting drive\n", drive->name, stat);
msleep(50);
hwif->OUTB(drive->select.all, IDE_SELECT_REG);
msleep(50);
......@@ -477,11 +480,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
/* ensure drive IRQ is clear */
stat = hwif->INB(IDE_STATUS_REG);
if (rc == 1)
printk("%s: no response (status = 0x%02x)\n",
drive->name, hwif->INB(IDE_STATUS_REG));
/* ensure drive irq is clear */
(void) hwif->INB(IDE_STATUS_REG);
printk(KERN_ERR "%s: no response (status = 0x%02x)\n",
drive->name, stat);
} else {
/* not present or maybe ATAPI */
rc = 3;
......@@ -502,6 +507,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
static void enable_nest (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 stat;
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
......@@ -515,11 +521,12 @@ static void enable_nest (ide_drive_t *drive)
msleep(50);
if (!OK_STAT((hwif->INB(IDE_STATUS_REG)), 0, BAD_STAT)) {
printk("failed (status = 0x%02x)\n", hwif->INB(IDE_STATUS_REG));
} else {
printk("success\n");
}
stat = hwif->INB(IDE_STATUS_REG);
if (!OK_STAT(stat, 0, BAD_STAT))
printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
else
printk(KERN_CONT "success\n");
/* if !(success||timed-out) */
if (do_probe(drive, WIN_IDENTIFY) >= 2) {
......@@ -822,7 +829,7 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
if (hwif->no_io_32bit)
if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT)
drive->no_io_32bit = 1;
else
drive->no_io_32bit = drive->id->dword_io ? 1 : 0;
......@@ -881,13 +888,6 @@ static int ide_init_queue(ide_drive_t *drive)
q->queuedata = drive;
blk_queue_segment_boundary(q, 0xffff);
if (!hwif->rqsize) {
if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
(hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
hwif->rqsize = 256;
else
hwif->rqsize = 65536;
}
if (hwif->rqsize < max_sectors)
max_sectors = hwif->rqsize;
blk_queue_max_sectors(q, max_sectors);
......@@ -918,6 +918,48 @@ static int ide_init_queue(ide_drive_t *drive)
return 0;
}
static void ide_add_drive_to_hwgroup(ide_drive_t *drive)
{
ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
spin_lock_irq(&ide_lock);
if (!hwgroup->drive) {
/* first drive for hwgroup. */
drive->next = drive;
hwgroup->drive = drive;
hwgroup->hwif = HWIF(hwgroup->drive);
} else {
drive->next = hwgroup->drive->next;
hwgroup->drive->next = drive;
}
spin_unlock_irq(&ide_lock);
}
/*
* For any present drive:
* - allocate the block device queue
* - link drive into the hwgroup
*/
static void ide_port_setup_devices(ide_hwif_t *hwif)
{
int i;
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];
if (!drive->present)
continue;
if (ide_init_queue(drive)) {
printk(KERN_ERR "ide: failed to init %s\n",
drive->name);
continue;
}
ide_add_drive_to_hwgroup(drive);
}
}
/*
* This routine sets up the irq for an ide interface, and creates a new
* hwgroup for the irq/hwif if none was previously assigned.
......@@ -1019,30 +1061,12 @@ static int init_irq (ide_hwif_t *hwif)
goto out_unlink;
}
/*
* For any present drive:
* - allocate the block device queue
* - link drive into the hwgroup
*/
for (index = 0; index < MAX_DRIVES; ++index) {
ide_drive_t *drive = &hwif->drives[index];
if (!drive->present)
continue;
if (ide_init_queue(drive)) {
printk(KERN_ERR "ide: failed to init %s\n",drive->name);
continue;
}
spin_lock_irq(&ide_lock);
if (!hwgroup->drive) {
/* first drive for hwgroup. */
drive->next = drive;
hwgroup->drive = drive;
hwgroup->hwif = HWIF(hwgroup->drive);
} else {
drive->next = hwgroup->drive->next;
hwgroup->drive->next = drive;
}
spin_unlock_irq(&ide_lock);
if (!hwif->rqsize) {
if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
(hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
hwif->rqsize = 256;
else
hwif->rqsize = 65536;
}
#if !defined(__mc68000__) && !defined(CONFIG_APUS)
......@@ -1058,6 +1082,9 @@ static int init_irq (ide_hwif_t *hwif)
printk(" (%sed with %s)",
hwif->sharing_irq ? "shar" : "serializ", match->name);
printk("\n");
ide_port_setup_devices(hwif);
mutex_unlock(&ide_cfg_mtx);
return 0;
out_unlink:
......@@ -1182,30 +1209,6 @@ static void drive_release_dev (struct device *dev)
complete(&drive->gendev_rel_comp);
}
/*
* init_gendisk() (as opposed to ide_geninit) is called for each major device,
* after probing for drives, to allocate partition tables and other data
* structures needed for the routines in genhd.c. ide_geninit() gets called
* somewhat later, during the partition check.
*/
static void init_gendisk (ide_hwif_t *hwif)
{
unsigned int unit;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t * drive = &hwif->drives[unit];
ide_add_generic_settings(drive);
snprintf(drive->gendev.bus_id,BUS_ID_SIZE,"%u.%u",
hwif->index,unit);
drive->gendev.parent = &hwif->gendev;
drive->gendev.bus = &ide_bus_type;
drive->gendev.driver_data = drive;
drive->gendev.release = drive_release_dev;
}
blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS,
THIS_MODULE, ata_probe, ata_lock, hwif);
}
static int hwif_init(ide_hwif_t *hwif)
{
int old_irq;
......@@ -1262,8 +1265,8 @@ static int hwif_init(ide_hwif_t *hwif)
hwif->name, hwif->irq);
done:
init_gendisk(hwif);
ide_acpi_init(hwif);
blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS,
THIS_MODULE, ata_probe, ata_lock, hwif);
return 1;
out:
......@@ -1277,23 +1280,118 @@ static void hwif_register_devices(ide_hwif_t *hwif)
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];
struct device *dev = &drive->gendev;
int ret;
if (drive->present) {
int ret = device_register(&drive->gendev);
if (!drive->present)
continue;
if (ret < 0)
printk(KERN_WARNING "IDE: %s: "
"device_register error: %d\n",
__FUNCTION__, ret);
}
ide_add_generic_settings(drive);
snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i);
dev->parent = &hwif->gendev;
dev->bus = &ide_bus_type;
dev->driver_data = drive;
dev->release = drive_release_dev;
ret = device_register(dev);
if (ret < 0)
printk(KERN_WARNING "IDE: %s: device_register error: "
"%d\n", __func__, ret);
}
}
static void ide_port_init_devices(ide_hwif_t *hwif)
{
int i;
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];
if (hwif->host_flags & IDE_HFLAG_IO_32BIT)
drive->io_32bit = 1;
if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS)
drive->unmask = 1;
if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
drive->no_unmask = 1;
if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0)
drive->autotune = 1;
}
if (hwif->port_init_devs)
hwif->port_init_devs(hwif);
}
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
const struct ide_port_info *d)
{
if (d->chipset != ide_etrax100)
hwif->channel = port;
if (d->chipset)
hwif->chipset = d->chipset;
if (d->init_iops)
d->init_iops(hwif);
if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
ide_hwif_setup_dma(hwif, d);
if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) ||
(d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
hwif->irq = port ? 15 : 14;
hwif->host_flags = d->host_flags;
hwif->pio_mask = d->pio_mask;
if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate)
hwif->mate->serialized = hwif->serialized = 1;
hwif->swdma_mask = d->swdma_mask;
hwif->mwdma_mask = d->mwdma_mask;
hwif->ultra_mask = d->udma_mask;
/* reset DMA masks only for SFF-style DMA controllers */
if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0)
hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0;
if (d->host_flags & IDE_HFLAG_RQSIZE_256)
hwif->rqsize = 256;
/* call chipset specific routine for each enabled port */
if (d->init_hwif)
d->init_hwif(hwif);
if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = hwif->cable_detect(hwif);
}
}
int ide_device_add_all(u8 *idx)
int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
{
ide_hwif_t *hwif;
ide_hwif_t *hwif, *mate = NULL;
int i, rc = 0;
for (i = 0; i < MAX_HWIFS; i++) {
if (d == NULL || idx[i] == 0xff) {
mate = NULL;
continue;
}
hwif = &ide_hwifs[idx[i]];
if (d->chipset != ide_etrax100 && (i & 1) && mate) {
hwif->mate = mate;
mate->mate = hwif;
}
mate = (i & 1) ? NULL : hwif;
ide_init_port(hwif, i & 1, d);
ide_port_init_devices(hwif);
}
for (i = 0; i < MAX_HWIFS; i++) {
if (idx[i] == 0xff)
continue;
......@@ -1337,6 +1435,9 @@ int ide_device_add_all(u8 *idx)
rc = -1;
continue;
}
ide_acpi_init(hwif);
ide_acpi_port_init_devices(hwif);
}
for (i = 0; i < MAX_HWIFS; i++) {
......@@ -1354,15 +1455,22 @@ int ide_device_add_all(u8 *idx)
}
for (i = 0; i < MAX_HWIFS; i++) {
if (idx[i] != 0xff)
ide_proc_register_port(&ide_hwifs[idx[i]]);
if (idx[i] == 0xff)
continue;
hwif = &ide_hwifs[idx[i]];
if (hwif->present) {
ide_proc_register_port(hwif);
ide_proc_port_register_devices(hwif);
}
}
return rc;
}
EXPORT_SYMBOL_GPL(ide_device_add_all);
int ide_device_add(u8 idx[4])
int ide_device_add(u8 idx[4], const struct ide_port_info *d)
{
u8 idx_all[MAX_HWIFS];
int i;
......@@ -1370,6 +1478,6 @@ int ide_device_add(u8 idx[4])
for (i = 0; i < MAX_HWIFS; i++)
idx_all[i] = (i < 4) ? idx[i] : 0xff;
return ide_device_add_all(idx_all);
return ide_device_add_all(idx_all, d);
}
EXPORT_SYMBOL_GPL(ide_device_add);
drivers/ide/ide-proc.c
View file @ 9135f190
......@@ -739,7 +739,7 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
EXPORT_SYMBOL(ide_proc_unregister_driver);
static void create_proc_ide_drives(ide_hwif_t *hwif)
void ide_proc_port_register_devices(ide_hwif_t *hwif)
{
int d;
struct proc_dir_entry *ent;
......@@ -793,9 +793,6 @@ static ide_proc_entry_t hwif_entries[] = {
void ide_proc_register_port(ide_hwif_t *hwif)
{
if (!hwif->present)
return;
if (!hwif->proc) {
hwif->proc = proc_mkdir(hwif->name, proc_ide_root);
......@@ -804,8 +801,6 @@ void ide_proc_register_port(ide_hwif_t *hwif)
ide_add_proc_entries(hwif->proc, hwif_entries, hwif);
}
create_proc_ide_drives(hwif);
}
#ifdef CONFIG_BLK_DEV_IDEPCI
......
drivers/ide/ide-tape.c
View file @ 9135f190
This diff is collapsed.
drivers/ide/ide-taskfile.c
View file @ 9135f190
......@@ -755,6 +755,7 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
u8 args[4], xfer_rate = 0;
ide_task_t tfargs;
struct ide_taskfile *tf = &tfargs.tf;
struct hd_driveid *id = drive->id;
if (NULL == (void *) arg) {
struct request rq;
......@@ -792,10 +793,16 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
return -ENOMEM;
}
if (set_transfer(drive, &tfargs)) {
if (tf->command == WIN_SETFEATURES &&
tf->feature == SETFEATURES_XFER &&
tf->nsect >= XFER_SW_DMA_0 &&
(id->dma_ultra || id->dma_mword || id->dma_1word)) {
xfer_rate = args[1];
if (ide_ata66_check(drive, &tfargs))
if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) {
printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
"be set\n", drive->name);
goto abort;
}
}
err = ide_raw_taskfile(drive, &tfargs, buf, args[3]);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment

Powered by Integricloud