Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits)
  PCI hotplug: clean up acpi_run_hpp()
  PCI hotplug: acpiphp: use generic pci_configure_slot()
  PCI hotplug: shpchp: use generic pci_configure_slot()
  PCI hotplug: pciehp: use generic pci_configure_slot()
  PCI hotplug: add pci_configure_slot()
  PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface
  PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge
  PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation
  PCI: Clear saved_state after the state has been restored
  PCI PM: Return error codes from pci_pm_resume()
  PCI: use dev_printk in quirk messages
  PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()
  PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle
  PCI Hotplug: acpiphp: find bridges the easy way
  PCI: pcie portdrv: remove unused variable
  PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support
  ACPI PM: Replace wakeup.prepared with reference counter
  PCI PM: Introduce device flag wakeup_prepared
  PCI / ACPI PM: Rework some debug messages
  PCI PM: Simplify PCI wake-up code
  ...

Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree
scanning having been moved and merged for the 32- and 64-bit cases.  The
'needs_freset' initialization added in 6e19314c ("PCI/powerpc: support
PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.

arch/x86/kernel/quirks.c

@@ -508,7 +508,7 @@ static void __init quirk_amd_nb_node(struct pci_dev *dev)
 
 	pci_read_config_dword(nb_ht, 0x60, &val);
 	set_dev_node(&dev->dev, val & 7);
-	pci_dev_put(dev);
+	pci_dev_put(nb_ht);
 }
 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,

arch/x86/pci/amd_bus.c

@@ -15,63 +15,6 @@
  * also get peer root bus resource for io,mmio
  */
 
-#ifdef CONFIG_NUMA
-
-#define BUS_NR 256
-
-#ifdef CONFIG_X86_64
-
-static int mp_bus_to_node[BUS_NR];
-
-void set_mp_bus_to_node(int busnum, int node)
-{
-	if (busnum >= 0 &&  busnum < BUS_NR)
-		mp_bus_to_node[busnum] = node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
-	int node = -1;
-
-	if (busnum < 0 || busnum > (BUS_NR - 1))
-		return node;
-
-	node = mp_bus_to_node[busnum];
-
-	/*
-	 * let numa_node_id to decide it later in dma_alloc_pages
-	 * if there is no ram on that node
-	 */
-	if (node != -1 && !node_online(node))
-		node = -1;
-
-	return node;
-}
-
-#else /* CONFIG_X86_32 */
-
-static unsigned char mp_bus_to_node[BUS_NR];
-
-void set_mp_bus_to_node(int busnum, int node)
-{
-	if (busnum >= 0 &&  busnum < BUS_NR)
-	mp_bus_to_node[busnum] = (unsigned char) node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
-	int node;
-
-	if (busnum < 0 || busnum > (BUS_NR - 1))
-		return 0;
-	node = mp_bus_to_node[busnum];
-	return node;
-}
-
-#endif /* CONFIG_X86_32 */
-
-#endif /* CONFIG_NUMA */
-
 #ifdef CONFIG_X86_64
 
 /*
@@ -301,11 +244,6 @@ static int __init early_fill_mp_bus_info(void)
 	u64 val;
 	u32 address;
 
-#ifdef CONFIG_NUMA
-	for (i = 0; i < BUS_NR; i++)
-		mp_bus_to_node[i] = -1;
-#endif
-
 	if (!early_pci_allowed())
 		return -1;
 
@@ -346,7 +284,7 @@ static int __init early_fill_mp_bus_info(void)
 		node = (reg >> 4) & 0x07;
 #ifdef CONFIG_NUMA
 		for (j = min_bus; j <= max_bus; j++)
-			mp_bus_to_node[j] = (unsigned char) node;
+			set_mp_bus_to_node(j, node);
 #endif
 		link = (reg >> 8) & 0x03;
 

arch/x86/pci/common.c

@@ -600,3 +600,72 @@ struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno)
 {
 	return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
 }
+
+/*
+ * NUMA info for PCI busses
+ *
+ * Early arch code is responsible for filling in reasonable values here.
+ * A node id of "-1" means "use current node".  In other words, if a bus
+ * has a -1 node id, it's not tightly coupled to any particular chunk
+ * of memory (as is the case on some Nehalem systems).
+ */
+#ifdef CONFIG_NUMA
+
+#define BUS_NR 256
+
+#ifdef CONFIG_X86_64
+
+static int mp_bus_to_node[BUS_NR] = {
+	[0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+		mp_bus_to_node[busnum] = node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node = -1;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return node;
+
+	node = mp_bus_to_node[busnum];
+
+	/*
+	 * let numa_node_id to decide it later in dma_alloc_pages
+	 * if there is no ram on that node
+	 */
+	if (node != -1 && !node_online(node))
+		node = -1;
+
+	return node;
+}
+
+#else /* CONFIG_X86_32 */
+
+static unsigned char mp_bus_to_node[BUS_NR] = {
+	[0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+	mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return 0;
+	node = mp_bus_to_node[busnum];
+	return node;
+}
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* CONFIG_NUMA */

drivers/acpi/pci_root.c

@@ -61,20 +61,6 @@ static struct acpi_driver acpi_pci_root_driver = {
 		},
 };
 
-struct acpi_pci_root {
-	struct list_head node;
-	struct acpi_device *device;
-	struct pci_bus *bus;
-	u16 segment;
-	u8 bus_nr;
-
-	u32 osc_support_set;	/* _OSC state of support bits */
-	u32 osc_control_set;	/* _OSC state of control bits */
-	u32 osc_control_qry;	/* the latest _OSC query result */
-
-	u32 osc_queried:1;	/* has _OSC control been queried? */
-};
-
 static LIST_HEAD(acpi_pci_roots);
 
 static struct acpi_pci_driver *sub_driver;
@@ -317,7 +303,7 @@ static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags)
 	return status;
 }
 
-static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
+struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
 {
 	struct acpi_pci_root *root;
 
@@ -327,6 +313,7 @@ static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
 	}
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(acpi_pci_find_root);
 
 struct acpi_handle_node {
 	struct list_head node;

drivers/acpi/power.c

@@ -44,6 +44,8 @@
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
+#include "sleep.h"
+
 #define _COMPONENT			ACPI_POWER_COMPONENT
 ACPI_MODULE_NAME("power");
 #define ACPI_POWER_CLASS		"power_resource"
@@ -361,17 +363,15 @@ int acpi_device_sleep_wake(struct acpi_device *dev,
  */
 int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state)
 {
-	int i, err;
+	int i, err = 0;
 
 	if (!dev || !dev->wakeup.flags.valid)
 		return -EINVAL;
 
-	/*
-	 * Do not execute the code below twice in a row without calling
-	 * acpi_disable_wakeup_device_power() in between for the same device
-	 */
-	if (dev->wakeup.flags.prepared)
-		return 0;
+	mutex_lock(&acpi_device_lock);
+
+	if (dev->wakeup.prepare_count++)
+		goto out;
 
 	/* Open power resource */
 	for (i = 0; i < dev->wakeup.resources.count; i++) {
@@ -379,7 +379,8 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state)
 		if (ret) {
 			printk(KERN_ERR PREFIX "Transition power state\n");
 			dev->wakeup.flags.valid = 0;
-			return -ENODEV;
+			err = -ENODEV;
+			goto err_out;
 		}
 	}
 
@@ -388,9 +389,13 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state)
 	 * in arbitrary power state afterwards.
 	 */
 	err = acpi_device_sleep_wake(dev, 1, sleep_state, 3);
-	if (!err)
-		dev->wakeup.flags.prepared = 1;
 
+ err_out:
+	if (err)
+		dev->wakeup.prepare_count = 0;
+
+ out:
+	mutex_unlock(&acpi_device_lock);
 	return err;
 }
 
@@ -402,35 +407,42 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state)
  */
 int acpi_disable_wakeup_device_power(struct acpi_device *dev)
 {
-	int i, ret;
+	int i, err = 0;
 
 	if (!dev || !dev->wakeup.flags.valid)
 		return -EINVAL;
 
+	mutex_lock(&acpi_device_lock);
+
+	if (--dev->wakeup.prepare_count > 0)
+		goto out;
+
 	/*
-	 * Do not execute the code below twice in a row without calling
-	 * acpi_enable_wakeup_device_power() in between for the same device
+	 * Executing the code below even if prepare_count is already zero when
+	 * the function is called may be useful, for example for initialisation.
 	 */
-	if (!dev->wakeup.flags.prepared)
-		return 0;
+	if (dev->wakeup.prepare_count < 0)
+		dev->wakeup.prepare_count = 0;
 
-	dev->wakeup.flags.prepared = 0;
-
-	ret = acpi_device_sleep_wake(dev, 0, 0, 0);
-	if (ret)
-		return ret;
+	err = acpi_device_sleep_wake(dev, 0, 0, 0);
+	if (err)
+		goto out;
 
 	/* Close power resource */
 	for (i = 0; i < dev->wakeup.resources.count; i++) {
-		ret = acpi_power_off_device(dev->wakeup.resources.handles[i], dev);
+		int ret = acpi_power_off_device(
+				dev->wakeup.resources.handles[i], dev);
 		if (ret) {
 			printk(KERN_ERR PREFIX "Transition power state\n");
 			dev->wakeup.flags.valid = 0;
-			return -ENODEV;
+			err = -ENODEV;
+			goto out;
 		}
 	}
 
-	return ret;
+ out:
+	mutex_unlock(&acpi_device_lock);
+	return err;
 }
 
 /* --------------------------------------------------------------------------

drivers/acpi/scan.c

@@ -781,6 +781,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
 	kfree(buffer.pointer);
 
 	device->wakeup.flags.valid = 1;
+	device->wakeup.prepare_count = 0;
 	/* Call _PSW/_DSW object to disable its ability to wake the sleeping
 	 * system for the ACPI device with the _PRW object.
 	 * The _PSW object is depreciated in ACPI 3.0 and is replaced by _DSW.

drivers/acpi/sleep.c

@@ -689,19 +689,25 @@ int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
 {
 	acpi_handle handle;
 	struct acpi_device *adev;
+	int error;
 
-	if (!device_may_wakeup(dev))
+	if (!device_can_wakeup(dev))
 		return -EINVAL;
 
 	handle = DEVICE_ACPI_HANDLE(dev);
 	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
-		printk(KERN_DEBUG "ACPI handle has no context!\n");
+		dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
 		return -ENODEV;
 	}
 
-	return enable ?
+	error = enable ?
 		acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
 		acpi_disable_wakeup_device_power(adev);
+	if (!error)
+		dev_info(dev, "wake-up capability %s by ACPI\n",
+				enable ? "enabled" : "disabled");
+
+	return error;
 }
 #endif
 

drivers/acpi/wakeup.c

@@ -68,7 +68,7 @@ void acpi_enable_wakeup_device(u8 sleep_state)
 		/* If users want to disable run-wake GPE,
 		 * we only disable it for wake and leave it for runtime
 		 */
-		if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
+		if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
 		    || sleep_state > (u32) dev->wakeup.sleep_state) {
 			if (dev->wakeup.flags.run_wake) {
 				/* set_gpe_type will disable GPE, leave it like that */
@@ -100,7 +100,7 @@ void acpi_disable_wakeup_device(u8 sleep_state)
 		if (!dev->wakeup.flags.valid)
 			continue;
 
-		if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
+		if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
 		    || sleep_state > (u32) dev->wakeup.sleep_state) {
 			if (dev->wakeup.flags.run_wake) {
 				acpi_set_gpe_type(dev->wakeup.gpe_device,

drivers/gpu/Makefile

-obj-y			+= drm/
+obj-y			+= drm/ vga/

drivers/gpu/vga/Kconfig

+config VGA_ARB
+	bool "VGA Arbitration" if EMBEDDED
+	default y
+	depends on PCI
+	help
+	  Some "legacy" VGA devices implemented on PCI typically have the same
+	  hard-decoded addresses as they did on ISA. When multiple PCI devices
+	  are accessed at same time they need some kind of coordination. Please
+	  see Documentation/vgaarbiter.txt for more details. Select this to
+	  enable VGA arbiter.

drivers/gpu/vga/Makefile

+obj-$(CONFIG_VGA_ARB)  += vgaarb.o

drivers/pci/Makefile

@@ -8,6 +8,9 @@ obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o \
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_SYSFS) += slot.o
 
+obj-$(CONFIG_PCI_LEGACY) += legacy.o
+CFLAGS_legacy.o += -Wno-deprecated-declarations
+
 # Build PCI Express stuff if needed
 obj-$(CONFIG_PCIEPORTBUS) += pcie/
 

drivers/pci/hotplug/Makefile

@@ -22,7 +22,7 @@ obj-$(CONFIG_HOTPLUG_PCI_SGI)		+= sgi_hotplug.o
 # Link this last so it doesn't claim devices that have a real hotplug driver
 obj-$(CONFIG_HOTPLUG_PCI_FAKE)		+= fakephp.o
 
-pci_hotplug-objs	:=	pci_hotplug_core.o
+pci_hotplug-objs	:=	pci_hotplug_core.o pcihp_slot.o
 
 ifdef CONFIG_HOTPLUG_PCI_CPCI
 pci_hotplug-objs	+=	cpci_hotplug_core.o	\

drivers/pci/hotplug/acpi_pcihp.c

@@ -41,7 +41,6 @@
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format , MY_NAME , ## arg)
 
 #define	METHOD_NAME__SUN	"_SUN"
-#define	METHOD_NAME__HPP	"_HPP"
 #define	METHOD_NAME_OSHP	"OSHP"
 
 static int debug_acpi;
@@ -215,80 +214,41 @@ acpi_run_hpx(acpi_handle handle, struct hotplug_params *hpx)
 static acpi_status
 acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
 {
-	acpi_status		status;
-	u8			nui[4];
-	struct acpi_buffer	ret_buf = { 0, NULL};
-	struct acpi_buffer	string = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object	*ext_obj, *package;
-	int			i, len = 0;
-
-	acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
+	acpi_status status;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *package, *fields;
+	int i;
 
-	/* Clear the return buffer with zeros */
 	memset(hpp, 0, sizeof(struct hotplug_params));
 
-	/* get _hpp */
-	status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
-	switch (status) {
-	case AE_BUFFER_OVERFLOW:
-		ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
-		if (!ret_buf.pointer) {
-			printk(KERN_ERR "%s:%s alloc for _HPP fail\n",
-				__func__, (char *)string.pointer);
-			kfree(string.pointer);
-			return AE_NO_MEMORY;
-		}
-		status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
-				NULL, &ret_buf);
-		if (ACPI_SUCCESS(status))
-			break;
-	default:
-		if (ACPI_FAILURE(status)) {
-			pr_debug("%s:%s _HPP fail=0x%x\n", __func__,
-				(char *)string.pointer, status);
-			kfree(string.pointer);
-			return status;
-		}
-	}
+	status = acpi_evaluate_object(handle, "_HPP", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return status;
 
-	ext_obj = (union acpi_object *) ret_buf.pointer;
-	if (ext_obj->type != ACPI_TYPE_PACKAGE) {
-		printk(KERN_ERR "%s:%s _HPP obj not a package\n", __func__,
-				(char *)string.pointer);
+	package = (union acpi_object *) buffer.pointer;
+	if (package->type != ACPI_TYPE_PACKAGE ||
+	    package->package.count != 4) {
 		status = AE_ERROR;
-		goto free_and_return;
+		goto exit;
 	}
 
-	len = ext_obj->package.count;
-	package = (union acpi_object *) ret_buf.pointer;
-	for ( i = 0; (i < len) || (i < 4); i++) {
-		ext_obj = (union acpi_object *) &package->package.elements[i];
-		switch (ext_obj->type) {
-		case ACPI_TYPE_INTEGER:
-			nui[i] = (u8)ext_obj->integer.value;
-			break;
-		default:
-			printk(KERN_ERR "%s:%s _HPP obj type incorrect\n",
-				__func__, (char *)string.pointer);
+	fields = package->package.elements;
+	for (i = 0; i < 4; i++) {
+		if (fields[i].type != ACPI_TYPE_INTEGER) {
 			status = AE_ERROR;
-			goto free_and_return;
+			goto exit;
 		}
 	}
 
 	hpp->t0 = &hpp->type0_data;
-	hpp->t0->cache_line_size = nui[0];
-	hpp->t0->latency_timer = nui[1];
-	hpp->t0->enable_serr = nui[2];
-	hpp->t0->enable_perr = nui[3];
-
-	pr_debug("  _HPP: cache_line_size=0x%x\n", hpp->t0->cache_line_size);
-	pr_debug("  _HPP: latency timer  =0x%x\n", hpp->t0->latency_timer);
-	pr_debug("  _HPP: enable SERR    =0x%x\n", hpp->t0->enable_serr);
-	pr_debug("  _HPP: enable PERR    =0x%x\n", hpp->t0->enable_perr);
+	hpp->t0->revision        = 1;
+	hpp->t0->cache_line_size = fields[0].integer.value;
+	hpp->t0->latency_timer   = fields[1].integer.value;
+	hpp->t0->enable_serr     = fields[2].integer.value;
+	hpp->t0->enable_perr     = fields[3].integer.value;
 
-free_and_return:
-	kfree(string.pointer);
-	kfree(ret_buf.pointer);
+exit:
+	kfree(buffer.pointer);
 	return status;
 }
 
@@ -322,20 +282,19 @@ static acpi_status acpi_run_oshp(acpi_handle handle)
 	return status;
 }
 
-/* acpi_get_hp_params_from_firmware
+/* pci_get_hp_params
  *
- * @bus - the pci_bus of the bus on which the device is newly added
+ * @dev - the pci_dev for which we want parameters
  * @hpp - allocated by the caller
  */
-acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
-		struct hotplug_params *hpp)
+int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp)
 {
-	acpi_status status = AE_NOT_FOUND;
+	acpi_status status;
 	acpi_handle handle, phandle;
 	struct pci_bus *pbus;
 
 	handle = NULL;
-	for (pbus = bus; pbus; pbus = pbus->parent) {
+	for (pbus = dev->bus; pbus; pbus = pbus->parent) {
 		handle = acpi_pci_get_bridge_handle(pbus);
 		if (handle)
 			break;
@@ -345,15 +304,15 @@ acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
 	 * _HPP settings apply to all child buses, until another _HPP is
 	 * encountered. If we don't find an _HPP for the input pci dev,
 	 * look for it in the parent device scope since that would apply to
-	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
+	 * this pci dev.
 	 */
 	while (handle) {
 		status = acpi_run_hpx(handle, hpp);
 		if (ACPI_SUCCESS(status))
-			break;
+			return 0;
 		status = acpi_run_hpp(handle, hpp);
 		if (ACPI_SUCCESS(status))
-			break;
+			return 0;
 		if (acpi_is_root_bridge(handle))
 			break;
 		status = acpi_get_parent(handle, &phandle);
@@ -361,9 +320,9 @@ acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
 			break;
 		handle = phandle;
 	}
-	return status;
+	return -ENODEV;
 }
-EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
+EXPORT_SYMBOL_GPL(pci_get_hp_params);
 
 /**
  * acpi_get_hp_hw_control_from_firmware
@@ -500,18 +459,18 @@ check_hotplug(acpi_handle handle, u32 lvl, void *context, void **rv)
 
 /**
  * acpi_pci_detect_ejectable - check if the PCI bus has ejectable slots
- * @pbus - PCI bus to scan
+ * @handle - handle of the PCI bus to scan
  *
  * Returns 1 if the PCI bus has ACPI based ejectable slots, 0 otherwise.
  */
-int acpi_pci_detect_ejectable(struct pci_bus *pbus)
+int acpi_pci_detect_ejectable(acpi_handle handle)
 {
-	acpi_handle handle;
 	int found = 0;
 
-	if (!(handle = acpi_pci_get_bridge_handle(pbus)))
-		return 0;
-	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+	if (!handle)
+		return found;
+
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
 			    check_hotplug, (void *)&found, NULL);
 	return found;
 }

drivers/pci/hotplug/acpiphp.h

@@ -91,9 +91,6 @@ struct acpiphp_bridge {
 	/* PCI-to-PCI bridge device */
 	struct pci_dev *pci_dev;
 
-	/* ACPI 2.0 _HPP parameters */
-	struct hotplug_params hpp;
-
 	spinlock_t res_lock;
 };
 

drivers/pci/hotplug/acpiphp_glue.c

@@ -59,7 +59,7 @@ static DEFINE_SPINLOCK(ioapic_list_lock);
 
 static void handle_hotplug_event_bridge (acpi_handle, u32, void *);
 static void acpiphp_sanitize_bus(struct pci_bus *bus);
-static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus);
+static void acpiphp_set_hpp_values(struct pci_bus *bus);
 static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context);
 
 /* callback routine to check for the existence of a pci dock device */
@@ -261,51 +261,21 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 
 
 /* see if it's worth looking at this bridge */
-static int detect_ejectable_slots(struct pci_bus *pbus)
+static int detect_ejectable_slots(acpi_handle handle)
 {
-	int found = acpi_pci_detect_ejectable(pbus);
+	int found = acpi_pci_detect_ejectable(handle);
 	if (!found) {
-		acpi_handle bridge_handle = acpi_pci_get_bridge_handle(pbus);
-		if (!bridge_handle)
-			return 0;
-		acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle, (u32)1,
+		acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
 				    is_pci_dock_device, (void *)&found, NULL);
 	}
 	return found;
 }
 
-
-/* decode ACPI 2.0 _HPP hot plug parameters */
-static void decode_hpp(struct acpiphp_bridge *bridge)
-{
-	acpi_status status;
-
-	status = acpi_get_hp_params_from_firmware(bridge->pci_bus, &bridge->hpp);
-	if (ACPI_FAILURE(status) ||
-	    !bridge->hpp.t0 || (bridge->hpp.t0->revision > 1)) {
-		/* use default numbers */
-		printk(KERN_WARNING
-		       "%s: Could not get hotplug parameters. Use defaults\n",
-		       __func__);
-		bridge->hpp.t0 = &bridge->hpp.type0_data;
-		bridge->hpp.t0->revision = 0;
-		bridge->hpp.t0->cache_line_size = 0x10;
-		bridge->hpp.t0->latency_timer = 0x40;
-		bridge->hpp.t0->enable_serr = 0;
-		bridge->hpp.t0->enable_perr = 0;
-	}
-}
-
-
-
 /* initialize miscellaneous stuff for both root and PCI-to-PCI bridge */
 static void init_bridge_misc(struct acpiphp_bridge *bridge)
 {
 	acpi_status status;
 
-	/* decode ACPI 2.0 _HPP (hot plug parameters) */
-	decode_hpp(bridge);
-
 	/* must be added to the list prior to calling register_slot */
 	list_add(&bridge->list, &bridge_list);
 
@@ -399,9 +369,10 @@ static inline void config_p2p_bridge_flags(struct acpiphp_bridge *bridge)
 
 
 /* allocate and initialize host bridge data structure */
-static void add_host_bridge(acpi_handle *handle, struct pci_bus *pci_bus)
+static void add_host_bridge(acpi_handle *handle)
 {
 	struct acpiphp_bridge *bridge;
+	struct acpi_pci_root *root = acpi_pci_find_root(handle);
 
 	bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
 	if (bridge == NULL)
@@ -410,7 +381,7 @@ static void add_host_bridge(acpi_handle *handle, struct pci_bus *pci_bus)
 	bridge->type = BRIDGE_TYPE_HOST;
 	bridge->handle = handle;
 
-	bridge->pci_bus = pci_bus;
+	bridge->pci_bus = root->bus;
 
 	spin_lock_init(&bridge->res_lock);
 
@@ -419,7 +390,7 @@ static void add_host_bridge(acpi_handle *handle, struct pci_bus *pci_bus)
 
 
 /* allocate and initialize PCI-to-PCI bridge data structure */
-static void add_p2p_bridge(acpi_handle *handle, struct pci_dev *pci_dev)
+static void add_p2p_bridge(acpi_handle *handle)
 {
 	struct acpiphp_bridge *bridge;
 
@@ -433,8 +404,8 @@ static void add_p2p_bridge(acpi_handle *handle, struct pci_dev *pci_dev)
 	bridge->handle = handle;
 	config_p2p_bridge_flags(bridge);
 
-	bridge->pci_dev = pci_dev_get(pci_dev);
-	bridge->pci_bus = pci_dev->subordinate;
+	bridge->pci_dev = acpi_get_pci_dev(handle);
+	bridge->pci_bus = bridge->pci_dev->subordinate;
 	if (!bridge->pci_bus) {
 		err("This is not a PCI-to-PCI bridge!\n");
 		goto err;
@@ -451,7 +422,7 @@ static void add_p2p_bridge(acpi_handle *handle, struct pci_dev *pci_dev)
 	init_bridge_misc(bridge);
 	return;
  err:
-	pci_dev_put(pci_dev);
+	pci_dev_put(bridge->pci_dev);
 	kfree(bridge);
 	return;
 }
@@ -462,39 +433,21 @@ static acpi_status
 find_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
 	acpi_status status;
-	acpi_handle dummy_handle;
-	unsigned long long tmp;
-	int device, function;
 	struct pci_dev *dev;
-	struct pci_bus *pci_bus = context;
-
-	status = acpi_get_handle(handle, "_ADR", &dummy_handle);
-	if (ACPI_FAILURE(status))
-		return AE_OK;		/* continue */
-
-	status = acpi_evaluate_integer(handle, "_ADR", NULL, &tmp);
-	if (ACPI_FAILURE(status)) {
-		dbg("%s: _ADR evaluation failure\n", __func__);
-		return AE_OK;
-	}
-
-	device = (tmp >> 16) & 0xffff;
-	function = tmp & 0xffff;
-
-	dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function));
 
+	dev = acpi_get_pci_dev(handle);
 	if (!dev || !dev->subordinate)
 		goto out;
 
 	/* check if this bridge has ejectable slots */
-	if ((detect_ejectable_slots(dev->subordinate) > 0)) {
+	if ((detect_ejectable_slots(handle) > 0)) {
 		dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev));
-		add_p2p_bridge(handle, dev);
+		add_p2p_bridge(handle);
 	}
 
 	/* search P2P bridges under this p2p bridge */
 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
-				     find_p2p_bridge, dev->subordinate, NULL);
+				     find_p2p_bridge, NULL, NULL);
 	if (ACPI_FAILURE(status))
 		warn("find_p2p_bridge failed (error code = 0x%x)\n", status);
 
@@ -509,9 +462,7 @@ static int add_bridge(acpi_handle handle)
 {
 	acpi_status status;
 	unsigned long long tmp;
-	int seg, bus;
 	acpi_handle dummy_handle;
-	struct pci_bus *pci_bus;
 
 	/* if the bridge doesn't have _STA, we assume it is always there */
 	status = acpi_get_handle(handle, "_STA", &dummy_handle);
@@ -526,36 +477,15 @@ static int add_bridge(acpi_handle handle)
 			return 0;
 	}
 
-	/* get PCI segment number */
-	status = acpi_evaluate_integer(handle, "_SEG", NULL, &tmp);
-
-	seg = ACPI_SUCCESS(status) ? tmp : 0;
-
-	/* get PCI bus number */
-	status = acpi_evaluate_integer(handle, "_BBN", NULL, &tmp);
-
-	if (ACPI_SUCCESS(status)) {
-		bus = tmp;
-	} else {
-		warn("can't get bus number, assuming 0\n");
-		bus = 0;
-	}
-
-	pci_bus = pci_find_bus(seg, bus);
-	if (!pci_bus) {
-		err("Can't find bus %04x:%02x\n", seg, bus);
-		return 0;
-	}
-
 	/* check if this bridge has ejectable slots */
-	if (detect_ejectable_slots(pci_bus) > 0) {
+	if (detect_ejectable_slots(handle) > 0) {
 		dbg("found PCI host-bus bridge with hot-pluggable slots\n");
-		add_host_bridge(handle, pci_bus);
+		add_host_bridge(handle);
 	}
 
 	/* search P2P bridges under this host bridge */
 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
-				     find_p2p_bridge, pci_bus, NULL);
+				     find_p2p_bridge, NULL, NULL);
 
 	if (ACPI_FAILURE(status))
 		warn("find_p2p_bridge failed (error code = 0x%x)\n", status);
@@ -1083,7 +1013,7 @@ static int __ref enable_device(struct acpiphp_slot *slot)
 
 	pci_bus_assign_resources(bus);
 	acpiphp_sanitize_bus(bus);
-	acpiphp_set_hpp_values(slot->bridge->handle, bus);
+	acpiphp_set_hpp_values(bus);
 	list_for_each_entry(func, &slot->funcs, sibling)
 		acpiphp_configure_ioapics(func->handle);
 	pci_enable_bridges(bus);
@@ -1294,70 +1224,12 @@ static int acpiphp_check_bridge(struct acpiphp_bridge *bridge)
 	return retval;
 }
 
-static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
+static void acpiphp_set_hpp_values(struct pci_bus *bus)
 {
-	u16 pci_cmd, pci_bctl;
-	struct pci_dev *cdev;
-
-	/* Program hpp values for this device */
-	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
-			(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
-			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
-		return;
-
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
-		return;
-
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
-			bridge->hpp.t0->cache_line_size);
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER,
-			bridge->hpp.t0->latency_timer);
-	pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
-	if (bridge->hpp.t0->enable_serr)
-		pci_cmd |= PCI_COMMAND_SERR;
-	else
-		pci_cmd &= ~PCI_COMMAND_SERR;
-	if (bridge->hpp.t0->enable_perr)
-		pci_cmd |= PCI_COMMAND_PARITY;
-	else
-		pci_cmd &= ~PCI_COMMAND_PARITY;
-	pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
-
-	/* Program bridge control value and child devices */
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
-				bridge->hpp.t0->latency_timer);
-		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
-		if (bridge->hpp.t0->enable_serr)
-			pci_bctl |= PCI_BRIDGE_CTL_SERR;
-		else
-			pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
-		if (bridge->hpp.t0->enable_perr)
-			pci_bctl |= PCI_BRIDGE_CTL_PARITY;
-		else
-			pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
-		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
-		if (dev->subordinate) {
-			list_for_each_entry(cdev, &dev->subordinate->devices,
-					bus_list)
-				program_hpp(cdev, bridge);
-		}
-	}
-}
-
-static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus)
-{
-	struct acpiphp_bridge bridge;
 	struct pci_dev *dev;
 
-	memset(&bridge, 0, sizeof(bridge));
-	bridge.handle = handle;
-	bridge.pci_bus = bus;
-	bridge.pci_dev = bus->self;
-	decode_hpp(&bridge);
 	list_for_each_entry(dev, &bus->devices, bus_list)
-		program_hpp(dev, &bridge);
-
+		pci_configure_slot(dev);
 }
 
 /*
@@ -1387,24 +1259,23 @@ static void acpiphp_sanitize_bus(struct pci_bus *bus)
 /* Program resources in newly inserted bridge */
 static int acpiphp_configure_bridge (acpi_handle handle)
 {
-	struct pci_dev *dev;
 	struct pci_bus *bus;
 
-	dev = acpi_get_pci_dev(handle);
-	if (!dev) {
-		err("cannot get PCI domain and bus number for bridge\n");
-		return -EINVAL;
+	if (acpi_is_root_bridge(handle)) {
+		struct acpi_pci_root *root = acpi_pci_find_root(handle);
+		bus = root->bus;
+	} else {
+		struct pci_dev *pdev = acpi_get_pci_dev(handle);
+		bus = pdev->subordinate;
+		pci_dev_put(pdev);
 	}
 
-	bus = dev->bus;
-
 	pci_bus_size_bridges(bus);
 	pci_bus_assign_resources(bus);
 	acpiphp_sanitize_bus(bus);
-	acpiphp_set_hpp_values(handle, bus);
+	acpiphp_set_hpp_values(bus);
 	pci_enable_bridges(bus);
 	acpiphp_configure_ioapics(handle);
-	pci_dev_put(dev);
 	return 0;
 }
 

drivers/pci/hotplug/pci_hotplug_core.c

@@ -86,7 +86,8 @@ static char *pci_bus_speed_strings[] = {
 	"66 MHz PCIX 533",	/* 0x11 */
 	"100 MHz PCIX 533",	/* 0x12 */
 	"133 MHz PCIX 533",	/* 0x13 */
-	"25 GBps PCI-E",	/* 0x14 */
+	"2.5 GT/s PCI-E",	/* 0x14 */
+	"5.0 GT/s PCI-E",	/* 0x15 */
 };
 
 #ifdef CONFIG_HOTPLUG_PCI_CPCI

drivers/pci/hotplug/pciehp.h

@@ -237,17 +237,8 @@ static inline int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
 		return retval;
 	return pciehp_acpi_slot_detection_check(dev);
 }
-
-static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
-			struct hotplug_params *hpp)
-{
-	if (ACPI_FAILURE(acpi_get_hp_params_from_firmware(dev->bus, hpp)))
-		return -ENODEV;
-	return 0;
-}
 #else
 #define pciehp_firmware_init()				do {} while (0)
 #define pciehp_get_hp_hw_control_from_firmware(dev) 	0
-#define pciehp_get_hp_params_from_firmware(dev, hpp)    (-ENODEV)
 #endif 				/* CONFIG_ACPI */
 #endif				/* _PCIEHP_H */

drivers/pci/hotplug/pciehp_acpi.c

@@ -47,7 +47,7 @@ int pciehp_acpi_slot_detection_check(struct pci_dev *dev)
 {
 	if (slot_detection_mode != PCIEHP_DETECT_ACPI)
 		return 0;
-	if (acpi_pci_detect_ejectable(dev->subordinate))
+	if (acpi_pci_detect_ejectable(DEVICE_ACPI_HANDLE(&dev->dev)))
 		return 0;
 	return -ENODEV;
 }
@@ -76,9 +76,9 @@ static int __init dummy_probe(struct pcie_device *dev)
 {
 	int pos;
 	u32 slot_cap;
+	acpi_handle handle;
 	struct slot *slot, *tmp;
 	struct pci_dev *pdev = dev->port;
-	struct pci_bus *pbus = pdev->subordinate;
 	/* Note: pciehp_detect_mode != PCIEHP_DETECT_ACPI here */
 	if (pciehp_get_hp_hw_control_from_firmware(pdev))
 		return -ENODEV;
@@ -94,7 +94,8 @@ static int __init dummy_probe(struct pcie_device *dev)
 			dup_slot_id++;
 	}
 	list_add_tail(&slot->slot_list, &dummy_slots);
-	if (!acpi_slot_detected && acpi_pci_detect_ejectable(pbus))
+	handle = DEVICE_ACPI_HANDLE(&pdev->dev);
+	if (!acpi_slot_detected && acpi_pci_detect_ejectable(handle))
 		acpi_slot_detected = 1;
 	return -ENODEV;         /* dummy driver always returns error */
 }