arm: omap: usb: create common enums and structures for ehci and ohci

Create the ehci and ohci specific platform data structures.
The port enum values are made common for both ehci and ohci.
Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

arch/arm/mach-omap2/board-3430sdp.c

@@ -653,11 +653,11 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 57,
@@ -816,7 +816,7 @@ static void __init omap_3430sdp_init(void)
 	board_flash_init(sdp_flash_partitions, chip_sel_3430);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")

arch/arm/mach-omap2/board-3630sdp.c

@@ -54,11 +54,11 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 126,
@@ -211,7 +211,7 @@ static void __init omap_sdp_init(void)
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
 	enable_board_wakeup_source();
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")

arch/arm/mach-omap2/board-4430sdp.c

@@ -251,10 +251,10 @@ static void __init omap_4430sdp_init_irq(void)
 	gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0]	= EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0]	= OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1]	= OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2]	= OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset	= false,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = -EINVAL,
@@ -584,7 +584,7 @@ static void __init omap_4430sdp_init(void)
 	else
 		gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
 
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();

arch/arm/mach-omap2/board-am3517crane.c

@@ -59,10 +59,10 @@ static void __init am3517_crane_init_irq(void)
 	omap_init_irq();
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = GPIO_USB_NRESET,
@@ -103,7 +103,7 @@ static void __init am3517_crane_init(void)
 		return;
 	}
 
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")

arch/arm/mach-omap2/board-am3517evm.c

@@ -430,15 +430,15 @@ static __init void am3517_evm_musb_init(void)
 	usb_musb_init(&musb_board_data);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
 		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 #else
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 #endif
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 57,
@@ -502,7 +502,7 @@ static void __init am3517_evm_init(void)
 
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
 	/* DSS */
 	am3517_evm_display_init();

arch/arm/mach-omap2/board-cm-t35.c

@@ -605,10 +605,10 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = OMAP_MAX_GPIO_LINES + 6,
@@ -810,7 +810,7 @@ static void __init cm_t35_init(void)
 	cm_t35_init_display();
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")

arch/arm/mach-omap2/board-cm-t3517.c

@@ -167,10 +167,10 @@ static inline void cm_t3517_init_rtc(void) {}
 #define HSUSB2_RESET_GPIO	(147)
 #define USB_HUB_RESET_GPIO	(152)
 
-static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = HSUSB1_RESET_GPIO,

arch/arm/mach-omap2/board-devkit8000.c

@@ -620,11 +620,11 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -803,7 +803,7 @@ static void __init devkit8000_init(void)
 	devkit8000_ads7846_init();
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	devkit8000_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */

arch/arm/mach-omap2/board-igep0020.c

@@ -627,10 +627,10 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
@@ -699,7 +699,7 @@ static void __init igep2_init(void)
 	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 
 	igep2_flash_init();
 	igep2_leds_init();

arch/arm/mach-omap2/board-igep0030.c

@@ -408,10 +408,10 @@ static void __init igep3_wifi_bt_init(void)
 void __init igep3_wifi_bt_init(void) {}
 #endif
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = -EINVAL,
@@ -435,7 +435,7 @@ static void __init igep3_init(void)
 	platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices));
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 
 	igep3_flash_init();
 	igep3_leds_init();

arch/arm/mach-omap2/board-omap3beagle.c

@@ -586,11 +586,11 @@ static void __init omap3beagle_flash_init(void)
 	}
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -625,7 +625,7 @@ static void __init omap3_beagle_init(void)
 	gpio_direction_output(170, true);
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	omap3beagle_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */

arch/arm/mach-omap2/board-omap3evm.c

@@ -638,11 +638,11 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	/* PHY reset GPIO will be runtime programmed based on EVM version */
@@ -700,7 +700,7 @@ static void __init omap3_evm_init(void)
 
 		/* setup EHCI phy reset config */
 		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		ehci_pdata.reset_gpio_port[1] = 21;
+		usbhs_bdata.reset_gpio_port[1] = 21;
 
 		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
 		musb_board_data.power = 500;
@@ -708,10 +708,10 @@ static void __init omap3_evm_init(void)
 	} else {
 		/* setup EHCI phy reset on MDC */
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		ehci_pdata.reset_gpio_port[1] = 135;
+		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	ads7846_dev_init();
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();

arch/arm/mach-omap2/board-omap3pandora.c

@@ -681,11 +681,11 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_vwlan_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 16,
@@ -716,7 +716,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	usb_musb_init(&musb_board_data);
 	gpmc_nand_init(&pandora_nand_data);
 

arch/arm/mach-omap2/board-omap3stalker.c

@@ -608,10 +608,10 @@ static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = -EINVAL,
@@ -649,7 +649,7 @@ static void __init omap3_stalker_init(void)
 
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	ads7846_dev_init();
 
 	omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -468,11 +468,11 @@ static void __init omap3touchbook_flash_init(void)
 	}
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -527,7 +527,7 @@ static void __init omap3_touchbook_init(void)
 				ARRAY_SIZE(omap3_ads7846_spi_board_info));
 	omap3_ads7846_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	omap3touchbook_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */

arch/arm/mach-omap2/board-omap4panda.c

@@ -83,10 +83,10 @@ static void __init omap4_panda_init_irq(void)
 	gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset  = false,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = -EINVAL,
@@ -128,7 +128,7 @@ static void __init omap4_ehci_init(void)
 	gpio_set_value(GPIO_HUB_NRESET, 0);
 	gpio_set_value(GPIO_HUB_NRESET, 1);
 
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 
 	/* enable power to hub */
 	gpio_set_value(GPIO_HUB_POWER, 1);

arch/arm/mach-omap2/board-overo.c

@@ -423,10 +423,10 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -454,7 +454,7 @@ static void __init overo_init(void)
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
 

arch/arm/mach-omap2/board-zoom.c

@@ -106,10 +106,10 @@ static struct mtd_partition zoom_nand_partitions[] = {
 	},
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0]		= OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2]		= OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset		= true,
 	.reset_gpio_port[0]	= -EINVAL,
 	.reset_gpio_port[1]	= ZOOM3_EHCI_RESET_GPIO,
@@ -123,7 +123,7 @@ static void __init omap_zoom_init(void)
 	} else if (machine_is_omap_zoom3()) {
 		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-		usb_ehci_init(&ehci_pdata);
+		usb_ehci_init(&usbhs_bdata);
 	}
 
 	board_nand_init(zoom_nand_partitions,

arch/arm/mach-omap2/usb-host.c

@@ -64,10 +64,10 @@ static struct platform_device ehci_device = {
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -81,7 +81,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
 		omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb1_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb1_tll_clk",
@@ -107,14 +107,14 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb1_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 
 	switch (port_mode[1]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -136,7 +136,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb2_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb2_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb2_tll_clk",
@@ -162,17 +162,17 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb2_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 
 	switch (port_mode[2]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb3_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb3_tll_clk",
@@ -198,7 +198,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb3_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -207,10 +207,10 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 	return;
 }
 
-static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("usbb1_ulpiphy_stp",
 			OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("usbb1_ulpiphy_clk",
@@ -236,7 +236,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb1_ulpiphy_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("usbb1_ulpitll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("usbb1_ulpitll_clk",
@@ -262,12 +262,12 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb1_ulpitll_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	default:
 			break;
 	}
 	switch (port_mode[1]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("usbb2_ulpiphy_stp",
 			OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("usbb2_ulpiphy_clk",
@@ -293,7 +293,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb2_ulpiphy_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("usbb2_ulpitll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("usbb2_ulpitll_clk",
@@ -319,13 +319,13 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb2_ulpitll_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	default:
 			break;
 	}
 }
 
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata)
 {
 	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
 
@@ -363,7 +363,7 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 
 #else
 
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata)
 
 {
 }
@@ -411,7 +411,7 @@ static struct platform_device ohci_device = {
 	.resource	= ohci_resources,
 };
 
-static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
+static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
@@ -439,7 +439,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm1_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -470,7 +470,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm2_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -501,14 +501,14 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm3_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 }
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata)
 {
 	platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
 
@@ -524,7 +524,7 @@ void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
 
 #else
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata)
 {
 }
 

arch/arm/plat-omap/include/plat/usb.h

@@ -7,15 +7,12 @@
 #include <plat/board.h>
 
 #define OMAP3_HS_USB_PORTS	3
-enum ehci_hcd_omap_mode {
-	EHCI_HCD_OMAP_MODE_UNKNOWN,
-	EHCI_HCD_OMAP_MODE_PHY,
-	EHCI_HCD_OMAP_MODE_TLL,
-	EHCI_HCD_OMAP_MODE_HSIC,
-};
 
-enum ohci_omap3_port_mode {
-	OMAP_OHCI_PORT_MODE_UNUSED,
+enum usbhs_omap_port_mode {
+	OMAP_USBHS_PORT_MODE_UNUSED,
+	OMAP_EHCI_PORT_MODE_PHY,
+	OMAP_EHCI_PORT_MODE_TLL,
+	OMAP_EHCI_PORT_MODE_HSIC,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
@@ -25,24 +22,45 @@ enum ohci_omap3_port_mode {
 	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
 };
 
-struct ehci_hcd_omap_platform_data {
-	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
-	unsigned			phy_reset:1;
+struct usbhs_omap_board_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 
 	/* have to be valid if phy_reset is true and portx is in phy mode */
 	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+
+	unsigned			phy_reset:1;
+
+	/*
+	 * Regulators for USB PHYs.
+	 * Each PHY can have a separate regulator.
+	 */
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
 };
 
-struct ohci_hcd_omap_platform_data {
-	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+struct ehci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+};
 
-	/* Set this to true for ES2.x silicon */
+struct ohci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	unsigned			es2_compatibility:1;
 };
 
+struct usbhs_omap_platform_data {
+	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+
+	struct ehci_hcd_omap_platform_data	*ehci_data;
+	struct ohci_hcd_omap_platform_data	*ohci_data;
+};
 /*-------------------------------------------------------------------------*/
 
 #define OMAP1_OTG_BASE			0xfffb0400
@@ -80,19 +98,17 @@ enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
-extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
+extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata);
 
-extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata);
 
 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
 extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
 #endif
 
-
 /*
  * FIXME correct answer depends on hmc_mode,
  * as does (on omap1) any nonzero value for config->otg port number