Merge branch 'master' into for-4.20/upstream-fixes

Pull in a merge commit that brought in 3b692c55 ("HID: asus: only
support backlight when it's not driven by WMI") so that fixup could be
applied on top of it.

.clang-format

@@ -323,7 +323,6 @@ ForEachMacros:
   - 'protocol_for_each_card'
   - 'protocol_for_each_dev'
   - 'queue_for_each_hw_ctx'
-  - 'radix_tree_for_each_contig'
   - 'radix_tree_for_each_slot'
   - 'radix_tree_for_each_tagged'
   - 'rbtree_postorder_for_each_entry_safe'

.mailmap

@@ -119,6 +119,13 @@ Mark Brown <broonie@sirena.org.uk>
 Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
+Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
+Matthew Wilcox <willy@infradead.org> <matthew@wil.cx>
+Matthew Wilcox <willy@infradead.org> <mawilcox@linuxonhyperv.com>
+Matthew Wilcox <willy@infradead.org> <mawilcox@microsoft.com>
+Matthew Wilcox <willy@infradead.org> <willy@debian.org>
+Matthew Wilcox <willy@infradead.org> <willy@linux.intel.com>
+Matthew Wilcox <willy@infradead.org> <willy@parisc-linux.org>
 Matthieu CASTET <castet.matthieu@free.fr>
 Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@brturbo.com.br>
 Mauro Carvalho Chehab <mchehab@kernel.org> <maurochehab@gmail.com>
@@ -153,6 +160,11 @@ Peter Oruba <peter.oruba@amd.com>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
 Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
+Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net>
+Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>
+Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com>
+Oleksij Rempel <linux@rempel-privat.de> <o.rempel@pengutronix.de>
+Oleksij Rempel <linux@rempel-privat.de> <ore@pengutronix.de>
 Rajesh Shah <rajesh.shah@intel.com>
 Ralf Baechle <ralf@linux-mips.org>
 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>

Documentation/ABI/stable/sysfs-driver-usb-usbtmc

@@ -25,38 +25,3 @@ Description:
 		4.2.2.
 
 		The files are read only.
-
-
-What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
-Date:		August 2008
-Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Description:
-		This file is the TermChar value to be sent to the USB TMC
-		device as described by the document, "Universal Serial Bus Test
-		and Measurement Class Specification
-		(USBTMC) Revision 1.0" as published by the USB-IF.
-
-		Note that the TermCharEnabled file determines if this value is
-		sent to the device or not.
-
-
-What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
-Date:		August 2008
-Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Description:
-		This file determines if the TermChar is to be sent to the
-		device on every transaction or not.  For more details about
-		this, please see the document, "Universal Serial Bus Test and
-		Measurement Class Specification (USBTMC) Revision 1.0" as
-		published by the USB-IF.
-
-
-What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
-Date:		August 2008
-Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Description:
-		This file determines if the transaction of the USB TMC
-		device is to be automatically aborted if there is any error.
-		For more details about this, please see the document,
-		"Universal Serial Bus Test and Measurement Class Specification
-		(USBTMC) Revision 1.0" as published by the USB-IF.

Documentation/ABI/testing/configfs-stp-policy-p_sys-t

+What:		/config/stp-policy/<device>:p_sys-t.<policy>/<node>/uuid
+Date:		June 2018
+KernelVersion:	4.19
+Description:
+		UUID source identifier string, RW.
+		Default value is randomly generated at the mkdir <node> time.
+		Data coming from trace sources that use this <node> will be
+		tagged with this UUID in the MIPI SyS-T packet stream, to
+		allow the decoder to discern between different sources
+		within the same master/channel range, and identify the
+		higher level decoders that may be needed for each source.
+
+What:		/config/stp-policy/<device>:p_sys-t.<policy>/<node>/do_len
+Date:		June 2018
+KernelVersion:	4.19
+Description:
+		Include payload length in the MIPI SyS-T header, boolean.
+		If enabled, the SyS-T protocol encoder will include payload
+		length in each packet's metadata. This is normally redundant
+		if the underlying transport protocol supports marking message
+		boundaries (which STP does), so this is off by default.
+
+What:		/config/stp-policy/<device>:p_sys-t.<policy>/<node>/ts_interval
+Date:		June 2018
+KernelVersion:	4.19
+Description:
+		Time interval in milliseconds. Include a timestamp in the
+		MIPI SyS-T packet metadata, if this many milliseconds have
+		passed since the previous packet from this source. Zero is
+		the default and stands for "never send the timestamp".
+
+What:		/config/stp-policy/<device>:p_sys-t.<policy>/<node>/clocksync_interval
+Date:		June 2018
+KernelVersion:	4.19
+Description:
+		Time interval in milliseconds. Send a CLOCKSYNC packet if
+		this many milliseconds have passed since the previous
+		CLOCKSYNC packet from this source. Zero is the default and
+		stands for "never send the CLOCKSYNC". It makes sense to
+		use this option with sources that generate constant and/or
+		periodic data, like stm_heartbeat.

Documentation/ABI/testing/configfs-usb-gadget-uvc

@@ -12,6 +12,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Control descriptors
 
+		All attributes read only:
+		bInterfaceNumber	- USB interface number for this
+					  streaming interface
+
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/class
 Date:		Dec 2014
 KernelVersion:	4.0
@@ -109,6 +113,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Streaming descriptors
 
+		All attributes read only:
+		bInterfaceNumber	- USB interface number for this
+					  streaming interface
+
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class
 Date:		Dec 2014
 KernelVersion:	4.0
@@ -160,6 +168,10 @@ Description:	Specific MJPEG format descriptors
 
 		All attributes read only,
 		except bmaControls and bDefaultFrameIndex:
+		bFormatIndex		- unique id for this format descriptor;
+					only defined after parent header is
+					linked into the streaming class;
+					read-only
 		bmaControls		- this format's data for bmaControls in
 					the streaming header
 		bmInterfaceFlags	- specifies interlace information,
@@ -177,6 +189,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Specific MJPEG frame descriptors
 
+		bFrameIndex		- unique id for this framedescriptor;
+					only defined after parent format is
+					linked into the streaming header;
+					read-only
 		dwFrameInterval		- indicates how frame interval can be
 					programmed; a number of values
 					separated by newline can be specified
@@ -204,6 +220,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Specific uncompressed format descriptors
 
+		bFormatIndex		- unique id for this format descriptor;
+					only defined after parent header is
+					linked into the streaming class;
+					read-only
 		bmaControls		- this format's data for bmaControls in
 					the streaming header
 		bmInterfaceFlags	- specifies interlace information,
@@ -224,6 +244,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Specific uncompressed frame descriptors
 
+		bFrameIndex		- unique id for this framedescriptor;
+					only defined after parent format is
+					linked into the streaming header;
+					read-only
 		dwFrameInterval		- indicates how frame interval can be
 					programmed; a number of values
 					separated by newline can be specified

Documentation/ABI/testing/sysfs-bus-iio

@@ -199,7 +199,7 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw
-KernelVersion:	4.18
+KernelVersion:	4.19
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Relative position in direction x or y on a pad (may be

Documentation/ABI/testing/sysfs-bus-pci

@@ -323,3 +323,27 @@ Description:
 
 		This is similar to /sys/bus/pci/drivers_autoprobe, but
 		affects only the VFs associated with a specific PF.
+
+What:		/sys/bus/pci/devices/.../p2pmem/size
+Date:		November 2017
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:
+		If the device has any Peer-to-Peer memory registered, this
+	        file contains the total amount of memory that the device
+		provides (in decimal).
+
+What:		/sys/bus/pci/devices/.../p2pmem/available
+Date:		November 2017
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:
+		If the device has any Peer-to-Peer memory registered, this
+	        file contains the amount of memory that has not been
+		allocated (in decimal).
+
+What:		/sys/bus/pci/devices/.../p2pmem/published
+Date:		November 2017
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:
+		If the device has any Peer-to-Peer memory registered, this
+	        file contains a '1' if the memory has been published for
+		use outside the driver that owns the device.

Documentation/ABI/testing/sysfs-bus-usb

@@ -189,6 +189,16 @@ Description:
 		The file will read "hotplug", "wired" and "not used" if the
 		information is available, and "unknown" otherwise.
 
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/location
+Date:		October 2018
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Some platforms provide usb port physical location through
+		firmware. This is used by the kernel to pair up logical ports
+		mapping to the same physical connector. The attribute exposes the
+		raw location value as a hex integer.
+
+
 What:		/sys/bus/usb/devices/.../(hub interface)/portX/quirks
 Date:		May 2018
 Contact:	Nicolas Boichat <drinkcat@chromium.org>
@@ -219,7 +229,14 @@ Description:
 		ports and report them to the kernel. This attribute is to expose
 		the number of over-current situation occurred on a specific port
 		to user space. This file will contain an unsigned 32 bit value
-		which wraps to 0 after its maximum is reached.
+		which wraps to 0 after its maximum is reached. This file supports
+		poll() for monitoring changes to this value in user space.
+
+		Any time this value changes the corresponding hub device will send a
+		udev event with the following attributes:
+
+		OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
+		OVER_CURRENT_COUNT=[current value of this sysfs attribute]
 
 What:		/sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
 Date:		November 2015

Documentation/ABI/testing/sysfs-bus-vmbus

+What:		/sys/bus/vmbus/devices/.../driver_override
+Date:		August 2019
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:
+		This file allows the driver for a device to be specified which
+		will override standard static and dynamic ID matching.  When
+		specified, only a driver with a name matching the value written
+		to driver_override will have an opportunity to bind to the
+		device.  The override is specified by writing a string to the
+		driver_override file (echo uio_hv_generic > driver_override) and
+		may be cleared with an empty string (echo > driver_override).
+		This returns the device to standard matching rules binding.
+		Writing to driver_override does not automatically unbind the
+		device from its current driver or make any attempt to
+		automatically load the specified driver.  If no driver with a
+		matching name is currently loaded in the kernel, the device
+		will not bind to any driver.  This also allows devices to
+		opt-out of driver binding using a driver_override name such as
+		"none".  Only a single driver may be specified in the override,
+		there is no support for parsing delimiters.
+

Documentation/ABI/testing/sysfs-class-net

@@ -91,6 +91,24 @@ Description:
 		stacked (e.g: VLAN interfaces) but still have the same MAC
 		address as their parent device.
 
+What:		/sys/class/net/<iface>/dev_port
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the port number of this network device, formatted
+		as a decimal value. Some NICs have multiple independent ports
+		on the same PCI bus, device and function. This attribute allows
+		userspace to distinguish the respective interfaces.
+
+		Note: some device drivers started to use 'dev_id' for this
+		purpose since long before 3.15 and have not adopted the new
+		attribute ever since. To query the port number, some tools look
+		exclusively at 'dev_port', while others only consult 'dev_id'.
+		If a network device has multiple client adapter ports as
+		described in the previous paragraph and does not set this
+		attribute to its port number, it's a kernel bug.
+
 What:		/sys/class/net/<iface>/dormant
 Date:		March 2006
 KernelVersion:	2.6.17

Documentation/ABI/testing/sysfs-platform-lg-laptop

+What:		/sys/devices/platform/lg-laptop/reader_mode
+Date:		October 2018
+KernelVersion:	4.20
+Contact:	"Matan Ziv-Av <matan@svgalib.org>
+Description:
+        Control reader mode. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/lg-laptop/fn_lock
+Date:		October 2018
+KernelVersion:	4.20
+Contact:	"Matan Ziv-Av <matan@svgalib.org>
+Description:
+        Control FN lock mode. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/lg-laptop/battery_care_limit
+Date:		October 2018
+KernelVersion:	4.20
+Contact:	"Matan Ziv-Av <matan@svgalib.org>
+Description:
+        Maximal battery charge level. Accepted values are 80 or 100.
+
+What:		/sys/devices/platform/lg-laptop/fan_mode
+Date:		October 2018
+KernelVersion:	4.20
+Contact:	"Matan Ziv-Av <matan@svgalib.org>
+Description:
+        Control fan mode. 1 for performance mode, 0 for silent mode.
+
+What:		/sys/devices/platform/lg-laptop/usb_charge
+Date:		October 2018
+KernelVersion:	4.20
+Contact:	"Matan Ziv-Av <matan@svgalib.org>
+Description:
+        Control USB port charging when device is turned off.
+        1 means on, 0 means off.

Documentation/PCI/endpoint/pci-test-howto.txt

@@ -99,17 +99,20 @@ Note that the devices listed here correspond to the value populated in 1.4 above
 2.2 Using Endpoint Test function Device
 
 pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
-tests. Before pcitest.sh can be used pcitest.c should be compiled using the
-following commands.
+tests. To compile this tool the following commands should be used:
 
-	cd <kernel-dir>
-	make headers_install ARCH=arm
-	arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest
-	cp pcitest  <rootfs>/usr/sbin/
-	cp tools/pci/pcitest.sh <rootfs>
+	# cd <kernel-dir>
+	# make -C tools/pci
+
+or if you desire to compile and install in your system:
+
+	# cd <kernel-dir>
+	# make -C tools/pci install
+
+The tool and script will be located in <rootfs>/usr/bin/
 
 2.2.1 pcitest.sh Output
-	# ./pcitest.sh
+	# pcitest.sh
 	BAR tests
 
 	BAR0:           OKAY

Documentation/PCI/pci-error-recovery.txt

@@ -110,7 +110,7 @@ The actual steps taken by a platform to recover from a PCI error
 event will be platform-dependent, but will follow the general
 sequence described below.
 
-STEP 0: Error Event: ERR_NONFATAL
+STEP 0: Error Event
 -------------------
 A PCI bus error is detected by the PCI hardware.  On powerpc, the slot
 is isolated, in that all I/O is blocked: all reads return 0xffffffff,
@@ -228,7 +228,13 @@ proceeds to either STEP3 (Link Reset) or to STEP 5 (Resume Operations).
 If any driver returned PCI_ERS_RESULT_NEED_RESET, then the platform
 proceeds to STEP 4 (Slot Reset)
 
-STEP 3: Slot Reset
+STEP 3: Link Reset
+------------------
+The platform resets the link.  This is a PCI-Express specific step
+and is done whenever a fatal error has been detected that can be
+"solved" by resetting the link.
+
+STEP 4: Slot Reset
 ------------------
 
 In response to a return value of PCI_ERS_RESULT_NEED_RESET, the
@@ -314,7 +320,7 @@ Failure).
 >>> However, it probably should.
 
 
-STEP 4: Resume Operations
+STEP 5: Resume Operations
 -------------------------
 The platform will call the resume() callback on all affected device
 drivers if all drivers on the segment have returned
@@ -326,7 +332,7 @@ a result code.
 At this point, if a new error happens, the platform will restart
 a new error recovery sequence.
 
-STEP 5: Permanent Failure
+STEP 6: Permanent Failure
 -------------------------
 A "permanent failure" has occurred, and the platform cannot recover
 the device.  The platform will call error_detected() with a
@@ -349,27 +355,6 @@ errors. See the discussion in powerpc/eeh-pci-error-recovery.txt
 for additional detail on real-life experience of the causes of
 software errors.
 
-STEP 0: Error Event: ERR_FATAL
--------------------
-PCI bus error is detected by the PCI hardware. On powerpc, the slot is
-isolated, in that all I/O is blocked: all reads return 0xffffffff, all
-writes are ignored.
-
-STEP 1: Remove devices
---------------------
-Platform removes the devices depending on the error agent, it could be
-this port for all subordinates or upstream component (likely downstream
-port)
-
-STEP 2: Reset link
---------------------
-The platform resets the link.  This is a PCI-Express specific step and is
-done whenever a fatal error has been detected that can be "solved" by
-resetting the link.
-
-STEP 3: Re-enumerate the devices
---------------------
-Initiates the re-enumeration.
 
 Conclusion; General Remarks
 ---------------------------

Documentation/accounting/psi.txt

+================================
+PSI - Pressure Stall Information
+================================
+
+:Date: April, 2018
+:Author: Johannes Weiner <hannes@cmpxchg.org>
+
+When CPU, memory or IO devices are contended, workloads experience
+latency spikes, throughput losses, and run the risk of OOM kills.
+
+Without an accurate measure of such contention, users are forced to
+either play it safe and under-utilize their hardware resources, or
+roll the dice and frequently suffer the disruptions resulting from
+excessive overcommit.
+
+The psi feature identifies and quantifies the disruptions caused by
+such resource crunches and the time impact it has on complex workloads
+or even entire systems.
+
+Having an accurate measure of productivity losses caused by resource
+scarcity aids users in sizing workloads to hardware--or provisioning
+hardware according to workload demand.
+
+As psi aggregates this information in realtime, systems can be managed
+dynamically using techniques such as load shedding, migrating jobs to
+other systems or data centers, or strategically pausing or killing low
+priority or restartable batch jobs.
+
+This allows maximizing hardware utilization without sacrificing
+workload health or risking major disruptions such as OOM kills.
+
+Pressure interface
+==================
+
+Pressure information for each resource is exported through the
+respective file in /proc/pressure/ -- cpu, memory, and io.
+
+The format for CPU is as such:
+
+some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+
+and for memory and IO:
+
+some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+full avg10=0.00 avg60=0.00 avg300=0.00 total=0
+
+The "some" line indicates the share of time in which at least some
+tasks are stalled on a given resource.
+
+The "full" line indicates the share of time in which all non-idle
+tasks are stalled on a given resource simultaneously. In this state
+actual CPU cycles are going to waste, and a workload that spends
+extended time in this state is considered to be thrashing. This has
+severe impact on performance, and it's useful to distinguish this
+situation from a state where some tasks are stalled but the CPU is
+still doing productive work. As such, time spent in this subset of the
+stall state is tracked separately and exported in the "full" averages.
+
+The ratios are tracked as recent trends over ten, sixty, and three
+hundred second windows, which gives insight into short term events as
+well as medium and long term trends. The total absolute stall time is
+tracked and exported as well, to allow detection of latency spikes
+which wouldn't necessarily make a dent in the time averages, or to
+average trends over custom time frames.
+
+Cgroup2 interface
+=================
+
+In a system with a CONFIG_CGROUP=y kernel and the cgroup2 filesystem
+mounted, pressure stall information is also tracked for tasks grouped
+into cgroups. Each subdirectory in the cgroupfs mountpoint contains
+cpu.pressure, memory.pressure, and io.pressure files; the format is
+the same as the /proc/pressure/ files.

Documentation/admin-guide/cgroup-v2.rst

@@ -966,6 +966,12 @@ All time durations are in microseconds.
 	$PERIOD duration.  "max" for $MAX indicates no limit.  If only
 	one number is written, $MAX is updated.
 
+  cpu.pressure
+	A read-only nested-key file which exists on non-root cgroups.
+
+	Shows pressure stall information for CPU. See
+	Documentation/accounting/psi.txt for details.
+
 
 Memory
 ------
@@ -1127,6 +1133,10 @@ PAGE_SIZE multiple when read back.
 		disk readahead.  For now OOM in memory cgroup kills
 		tasks iff shortage has happened inside page fault.
 
+		This event is not raised if the OOM killer is not
+		considered as an option, e.g. for failed high-order
+		allocations.
+
 	  oom_kill
 		The number of processes belonging to this cgroup
 		killed by any kind of OOM killer.
@@ -1271,6 +1281,12 @@ PAGE_SIZE multiple when read back.
 	higher than the limit for an extended period of time.  This
 	reduces the impact on the workload and memory management.
 
+  memory.pressure
+	A read-only nested-key file which exists on non-root cgroups.
+
+	Shows pressure stall information for memory. See
+	Documentation/accounting/psi.txt for details.
+
 
 Usage Guidelines
 ~~~~~~~~~~~~~~~~
@@ -1408,6 +1424,12 @@ IO Interface Files
 
 	  8:16 rbps=2097152 wbps=max riops=max wiops=max
 
+  io.pressure
+	A read-only nested-key file which exists on non-root cgroups.
+
+	Shows pressure stall information for IO. See
+	Documentation/accounting/psi.txt for details.
+
 
 Writeback
 ~~~~~~~~~

Documentation/admin-guide/kernel-parameters.txt

@@ -1759,6 +1759,18 @@
 		nobypass	[PPC/POWERNV]
 			Disable IOMMU bypass, using IOMMU for PCI devices.
 
+	iommu.strict=	[ARM64] Configure TLB invalidation behaviour
+			Format: { "0" | "1" }
+			0 - Lazy mode.
+			  Request that DMA unmap operations use deferred
+			  invalidation of hardware TLBs, for increased
+			  throughput at the cost of reduced device isolation.
+			  Will fall back to strict mode if not supported by
+			  the relevant IOMMU driver.
+			1 - Strict mode (default).
+			  DMA unmap operations invalidate IOMMU hardware TLBs
+			  synchronously.
+
 	iommu.passthrough=
 			[ARM64] Configure DMA to bypass the IOMMU by default.
 			Format: { "0" | "1" }
@@ -2416,7 +2428,7 @@
 			seconds.  Use this parameter to check at some
 			other rate.  0 disables periodic checking.
 
-	memtest=	[KNL,X86,ARM] Enable memtest
+	memtest=	[KNL,X86,ARM,PPC] Enable memtest
 			Format: <integer>
 			default : 0 <disable>
 			Specifies the number of memtest passes to be
@@ -4623,7 +4635,8 @@
 
 	usbcore.old_scheme_first=
 			[USB] Start with the old device initialization
-			scheme (default 0 = off).
+			scheme,  applies only to low and full-speed devices
+			 (default 0 = off).
 
 	usbcore.usbfs_memory_mb=
 			[USB] Memory limit (in MB) for buffers allocated by
@@ -4838,6 +4851,18 @@
 			This is actually a boot loader parameter; the value is
 			passed to the kernel using a special protocol.
 
+	vm_debug[=options]	[KNL] Available with CONFIG_DEBUG_VM=y.
+			May slow down system boot speed, especially when
+			enabled on systems with a large amount of memory.
+			All options are enabled by default, and this
+			interface is meant to allow for selectively
+			enabling or disabling specific virtual memory
+			debugging features.
+
+			Available options are:
+			  P	Enable page structure init time poisoning
+			  -	Disable all of the above options
+
 	vmalloc=nn[KMG]	[KNL,BOOT] Forces the vmalloc area to have an exact
 			size of <nn>. This can be used to increase the
 			minimum size (128MB on x86). It can also be used to

Documentation/admin-guide/mm/memory-hotplug.rst

@@ -5,7 +5,7 @@ Memory Hotplug
 ==============
 
 :Created:							Jul 28 2007
-:Updated: Add description of notifier of memory hotplug:	Oct 11 2007
+:Updated: Add some details about locking internals:		Aug 20 2018
 
 This document is about memory hotplug including how-to-use and current status.
 Because Memory Hotplug is still under development, contents of this text will
@@ -392,6 +392,46 @@ Need more implementation yet....
  - Notification completion of remove works by OS to firmware.
  - Guard from remove if not yet.
 
+
+Locking Internals
+=================
+
+When adding/removing memory that uses memory block devices (i.e. ordinary RAM),
+the device_hotplug_lock should be held to:
+
+- synchronize against online/offline requests (e.g. via sysfs). This way, memory
+  block devices can only be accessed (.online/.state attributes) by user
+  space once memory has been fully added. And when removing memory, we
+  know nobody is in critical sections.
+- synchronize against CPU hotplug and similar (e.g. relevant for ACPI and PPC)
+
+Especially, there is a possible lock inversion that is avoided using
+device_hotplug_lock when adding memory and user space tries to online that
+memory faster than expected:
+
+- device_online() will first take the device_lock(), followed by
+  mem_hotplug_lock
+- add_memory_resource() will first take the mem_hotplug_lock, followed by
+  the device_lock() (while creating the devices, during bus_add_device()).
+
+As the device is visible to user space before taking the device_lock(), this
+can result in a lock inversion.
+
+onlining/offlining of memory should be done via device_online()/
+device_offline() - to make sure it is properly synchronized to actions
+via sysfs. Holding device_hotplug_lock is advised (to e.g. protect online_type)
+
+When adding/removing/onlining/offlining memory or adding/removing
+heterogeneous/device memory, we should always hold the mem_hotplug_lock in
+write mode to serialise memory hotplug (e.g. access to global/zone
+variables).
+
+In addition, mem_hotplug_lock (in contrast to device_hotplug_lock) in read
+mode allows for a quite efficient get_online_mems/put_online_mems
+implementation, so code accessing memory can protect from that memory
+vanishing.
+
+
 Future Work
 ===========
 

Documentation/admin-guide/security-bugs.rst

@@ -26,23 +26,34 @@ information is helpful.  Any exploit code is very helpful and will not
 be released without consent from the reporter unless it has already been
 made public.
 
-Disclosure
-----------
-
-The goal of the Linux kernel security team is to work with the bug
-submitter to understand and fix the bug.  We prefer to publish the fix as
-soon as possible, but try to avoid public discussion of the bug itself
-and leave that to others.
-
-Publishing the fix may be delayed when the bug or the fix is not yet
-fully understood, the solution is not well-tested or for vendor
-coordination.  However, we expect these delays to be short, measurable in
-days, not weeks or months.  A release date is negotiated by the security
-team working with the bug submitter as well as vendors.  However, the
-kernel security team holds the final say when setting a timeframe.  The
-timeframe varies from immediate (esp. if it's already publicly known bug)
-to a few weeks.  As a basic default policy, we expect report date to
-release date to be on the order of 7 days.
+Disclosure and embargoed information
+------------------------------------
+
+The security list is not a disclosure channel.  For that, see Coordination
+below.
+
+Once a robust fix has been developed, our preference is to release the
+fix in a timely fashion, treating it no differently than any of the other
+thousands of changes and fixes the Linux kernel project releases every
+month.
+
+However, at the request of the reporter, we will postpone releasing the
+fix for up to 5 business days after the date of the report or after the
+embargo has lifted; whichever comes first.  The only exception to that
+rule is if the bug is publicly known, in which case the preference is to
+release the fix as soon as it's available.
+
+Whilst embargoed information may be shared with trusted individuals in
+order to develop a fix, such information will not be published alongside
+the fix or on any other disclosure channel without the permission of the
+reporter.  This includes but is not limited to the original bug report
+and followup discussions (if any), exploits, CVE information or the
+identity of the reporter.
+
+In other words our only interest is in getting bugs fixed.  All other
+information submitted to the security list and any followup discussions
+of the report are treated confidentially even after the embargo has been
+lifted, in perpetuity.
 
 Coordination
 ------------
@@ -68,7 +79,7 @@ may delay the bug handling. If a reporter wishes to have a CVE identifier
 assigned ahead of public disclosure, they will need to contact the private
 linux-distros list, described above. When such a CVE identifier is known
 before a patch is provided, it is desirable to mention it in the commit
-message, though.
+message if the reporter agrees.
 
 Non-disclosure agreements
 -------------------------

Documentation/arm/Samsung/Bootloader-interface.txt

@@ -26,6 +26,7 @@ Offset        Value                                        Purpose
 0x20          0xfcba0d10 (Magic cookie)                    AFTR
 0x24          exynos_cpu_resume_ns                         AFTR
 0x28 + 4*cpu  0x8 (Magic cookie, Exynos3250)               AFTR
+0x28          0x0 or last value during resume (Exynos542x) System suspend
 
 
 2. Secure mode

Documentation/cgroup-v1/rdma.txt

@@ -27,7 +27,7 @@ cgroup.
 Currently user space applications can easily take away all the rdma verb
 specific resources such as AH, CQ, QP, MR etc. Due to which other applications
 in other cgroup or kernel space ULPs may not even get chance to allocate any
-rdma resources. This can leads to service unavailability.
+rdma resources. This can lead to service unavailability.
 
 Therefore RDMA controller is needed through which resource consumption
 of processes can be limited. Through this controller different rdma