GitLab

Add a check to validate the selected channel/interface, which not even
libftdi seems to do yet.
This patch changes default behavior: the new default channel/interface is A.
Also, this patch uses the word 'channel' in addition or in place of 'interface'
where possible without too much hassle because it is the term FTDI uses.

Corresponding to flashrom svn r1608.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Heavily influenced by a discussion with (and based on code from) Peter Stuge.
Please read the comment in the Makefile before using this option.

Corresponding to flashrom svn r1607.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Peter Stuge <peter@stuge.se>

This should get rid of the need to specify the laptop force
parameter on T60 and X60 series Thinkpads (including T60s and X60s)
that are using one of the Intel 94x northbridges and are known to have
no interfering EC. Please note that although the EC is no problem, flashrom
is not able to access the entire flash chip with the vendor BIOS, see the
coreboot wiki for details: http://www.coreboot.org/Lenovo_x60x



Corresponding to flashrom svn r1606.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>

In r1577 we removed the discrimination of coreboot IDs and user-specified
mainboards. The problem is that the board enable code required to find
a board enable if either of these model strings were set. Therefore boards
running coreboot that do not need a board enable failed to execute flashrom
since then. This patch fixes this by handling coreboot IDs and user-supplied
IDs differently again.

Corresponding to flashrom svn r1605.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

In dmi_init() we populate static char *dmistrings[] with values that get
later compared in dmi_match(). Those strings are actually strduped in
get_dmi_string() and hence need to be freed later. This patch accomplishes
this by registering another shutdown method. Also, the tangling pointers are
nulled when the memories are freed.

This bug was found thanks to valgrind.

Corresponding to flashrom svn r1604.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Emu_persistent_image was not freed correctly.

This bug was found thanks to valgrind.

Corresponding to flashrom svn r1603.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1602.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Tested Mainboards:
OK:
 - ASUS M3A78-EH
   http://www.flashrom.org/pipermail/flashrom/2010-October/005297.html
 - ASUS P2B-LS
   http://www.flashrom.org/pipermail/flashrom/2010-November/005506.html
 - Biostar TA790GX A3+
   http://paste.flashrom.org/view.php?id=1350
 - ECS 848P-A7
   http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html
 - GIGABYTE GA-G41MT-S2PT
   Reported on IRC
 - GIGABYTE GA-H77-D3H
   Reported and tested by Alexander Gordeev on IRC.
 - Gigabyte GA-X79-UD5
   http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html
 - Shuttle FN78S
   http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html
 - VIA EITX-3000
   Reported on IRC by Tuju

NOT OK:
 - Dell PowerEdge C6220 (0HYFFG)
   http://www.flashrom.org/pipermail/flashrom/2012-September/009900.html
 - Foxconn Q45M
   http://www.flashrom.org/pipermail/flashrom/2012-September/009923.html
 - MSI MS-7309 (K9N6SGM-V)
   http://www.flashrom.org/pipe...

This is used by the AT25F series (only?), but is generic enough to
reside in spi25.c. The only currently supported chip is the AT25F512B.
Other members of that series need some additional infrastructure code,
hence this patch adds the erase function to the AT25F512B only.

Corresponding to flashrom svn r1600.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Requires libftdi > 0.5 (2004, commit ID a8f46ddc1595b1b07abfcce613acdafe5b8ddf9d).
Idea stolen from chromiumos commit 5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68



Corresponding to flashrom svn r1599.
Signed-off-by: Shik Chen <shik@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This is the low power version (vendor,device = 0xc8,0x6016) of
GD25Q32 (0xc8,0x4016) which matches that of W25Q32 (0xef,0x4016) and
W25Q32DW (0xef,0x6016).  All their datasheets look pretty much the
same with respect to commands, erase blocks, etc.

Stolen from chromiumos:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commitdiff;h=9a0051f0ba0b67af6f08e052c31cba3e9dbbbdbf



Corresponding to flashrom svn r1598.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

It's the same as for the Neo2.
Thanks to roxfan and twice11 who did the RE!

Corresponding to flashrom svn r1597.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Jud Porter
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Based on http://patchwork.coreboot.org/patch/2881/

 but with 
the right pin (i.e. 16) according to Joshua Roys.

Corresponding to flashrom svn r1596.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add return values to sp_synchronize so we can signal a failure to the
only upstream caller (serprog_init), which is prepared to propagate a failure.

sp_sync_read_timeout was harder to fix because it already used a return
value, but we needed to distinguish two different failure modes. This
solution distinguishes them by the sign of the return values, which maintains
readability as much as possible.

Thanks to Niklas Söderlund for the original patch and idea.

Corresponding to flashrom svn r1595.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Its ID was spotted in an ICH descriptor region update by Jetway:
http://paste.flashrom.org/view.php?id=1217

 and is used on ASUS P8B75-V
boards according to some forum posts (2 chips per board actually).

No datasheet was found, so most values are just guessed from the EN25F32.

Corresponding to flashrom svn r1594.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

We made a first step into this direction in r1405, but failed to
notice that there was already an extended patch by Jonathan which
was refined to become this one.

Allows the removal of board_shuttle_fn25 (which was also intended to be
used on the ASUS A8N-SLI Deluxe, but this was never tested).

Corresponding to flashrom svn r1593.

A previous iteration was tested on CK804 and
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
which was then
Acked-by: Stefan Reinauer <stepan@coreboot.org>

Rebasing, refining and making errors non-fatal is
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This patch also changes semantics: previously failing to set this was interpreted as
a fatal error by enable_flash_ck804 and enable_flash_mcp55 although the output
indicated otherwise. Also, in enable_flash_nvidia_nforce2 there was no check
if settings the bit succeeds.

Now all methods check for success and return ERROR_NONFATAL on failure.

Corresponding to flashrom svn r1592.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This was broken since r1557 when we got rid of some exit calls, but returned
-1 instead which is not a valid HANDLE value.

Corresponding to flashrom svn r1591.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

http://www.ajawe.pl/ajawe0208.htm
http://www.ajawe.pl/files/0208_R_DOK.pdf



Corresponding to flashrom svn r1590.

First version was
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Refinements and general cleanup is
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Fix a few odd corner cases in RES/REMS support in dummyflasher
emulation which became noticeable once RES/REMS was used heavily.

Corresponding to flashrom svn r1589.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1588.

This is based on the idea from the "Make satasii driver more robust" patch
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

It factors out the wait loop and replaces all potential endless
loops instead of just a few.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Some vendors forget to disable regions properly and set their FRAP bits
and FREG to 0. While not documented publicly this is being ignored by the
chipset(s)[1] and hence flashrom should do so too. Without this patch
flashrom prints a warning and disables writes.
The check for i (region index) excludes the descriptor region which should not
be becessary because specs suggest that the descriptor region should not
be locked, but if vendors would follow the specs this patch would not have
been necessary in the first place.

[1]: http://www.flashrom.org/pipermail/flashrom/2012-May/009303.html



Corresponding to flashrom svn r1587.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

And some cleanups including the removal of any left traces of the
nicsmc1211 programmer. The RTL8169 still needs someone to test it,
but it's good enough to be in the tree now.

Corresponding to flashrom svn r1586.
Signed-off-by: Sergey Lichack <shadowpilot34@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Mathias Krause <mathias.krause@secunet.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This patch just fixes a limited number of bits not conforming to c99 by using
 - __asm__ instead of just asm
 - {0} instead of {} for struct initialization
 - h_addr_list[0] instead of h_addr to access the host address in
   struct hostent
 - #include <strings.h> where needed (for ffs and strcasecmp)

Based on a previous patch by Carl-Daniel.

Corresponding to flashrom svn r1585.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1584.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

The AT25F512B is quite different from the other (older and yet
unsupported) chips in the AT25F* familiy, hence rename 512B-specific
stuff to make room for the generic AT25F* code.

Corresponding to flashrom svn r1583.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This is based on chromiumos commit a5f4e82c59d6bcaf06b94623e5516d1db8cb843a.
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=a5f4e82c59d6bcaf06b94623e5516d1db8cb843a
See also http://www.flashrom.org/pipermail/flashrom/2011-November/008191.html



Besides disabling the SMM protection this also fixes something that bothered
me for a long time: the content of BIOS_CNTL was shown before we try to modify
it. This is usually not what interests us and contradicts other outputs.
With this patch we try to set the write enable and disable the SMM protection
first and show the state of BIOS_CNTL afterwards.

We now return an error only if the write enable is not set (which should be
equivalent to the previous behavior on sane hardware, but it seems to be
'more correct' and makes the code clearer to do this explicitly).

Corresponding to flashrom svn r1582.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signe...

Corresponding to flashrom svn r1581.

Based on http://patchwork.coreboot.org/patch/2983/

Signed-off-by: Tadas Slotkus <devtadas@gmail.com>

PCI IDs are generic therefore requiring manual activation.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1580.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.

Corresponding to flashrom svn r1579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Helge Wagner's patch that added VIA VX900 chipset support made me look
closer at the datasheets which led to some concise documentation about
newer VIA chipsets: http://flashrom.org/VIA



Based on that this patch adds full support for VX800/VX820, VX855/VX875
and VX900, including SPI and LPC. VT8237S was not changed (SPI support
only) because there is no public datasheet and it is not clear how to
distinguish between LPC and SPI strapping and investigations in (NDAed)
documents have not brought up anything conclusively.

enable_flash_vt823x could probably be enhanced too due to various
ignored LPC options of the chipset.

Corresponding to flashrom svn r1578.
Signed-off-by: Helge Wagner <Helge.Wagner@ge.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This patch gets rid of some global variables and makes lots of bits along
the code path that control the board enable execution more generic and
clearer. From now on flashrom aborts on a few more occasions that should be
safer for the user. For example it aborts if the enable function for the
specified mainboard (enable) can not be found.

Parts of the board_match_cbname refactoring were done by Carl-Daniel.

Corresponding to flashrom svn r1577.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The Bus Pirate firmware (at least v6.1 and earlier) can't handle UART
input buffer overflow in BBIO mode, and sending a sequence of 0x00 too
fast apparently triggers such an UART input buffer overflow. Wait 10 ms
after sending each 0x00 byte during init to give the Bus Pirate enough
time to handle the input. This fixes a Bus Pirate hang if the previous
flashrom run was aborted by the user.

The Bus Pirate firmware v6.1 and earlier use the wrong (too slow) SPI
speed if more than 2 MHz are requested. Automatically downgrade SPI
speed to 2 MHz for affected firmware versions.

Detect Bus Pirate hardware and firmware versions to allow quirk
handling.

The Bus Pirate init sequence has lots of open-coded sequences which wait
for a given string on the serial line. Refactor them into
buspirate_wait_for_string().

Corresponding to flashrom svn r1576.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.200...

The user may know better which CFLAGS/CPPFLAGS are appropriate.
Use flashrom_CFLAGS for flags which flashrom definitely needs to build.

Thanks to Stefan Tauner for pointing out the flaw in r1574.

Corresponding to flashrom svn r1575.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

GNU make has a very interesting quirk: If you set a variable on the
command line, any changes to that variable in the Makefile are ignored
unless marked with the "override" keyword.

Use CFLAGS only for optimization and warning options, and use CPPFLAGS
for the dependency and other preprocessor related options.
That way packagers can specify their own CFLAGS without breaking the
build.

As a side benefit, the ich_descriptors_tool Makefile now behaves exactly
the same whether called standalone or as part of the main Makefile.

Corresponding to flashrom svn r1574.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Else libftdi complains that it is impossible to set interface on an already
open device since 1c5fa36b67bc30742eee94ed3e3648fcd4640f24
(which will probably end up in libftdi 0.21).

Corresponding to flashrom svn r1573.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, alter the page size of the other family members to indicate that it is
unused. Maybe this accelerates the deletion of this field... haha.

Corresponding to flashrom svn r1572.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Introduce a new opcode (0x14) that sends the requested frequency as a 32b
long value in Hertz to the programmer and receives the frequency eventually
chosen by the programmer. The user can specify this with the programmer
parameter "spispeed" (named after the similar parameter for the buspirate)
including an optional suffix of 'M' or 'k' for specifying megahertz or kilohertz
respectively (lowercase suffixes are also accepted).

Thanks to Idwer and Uwe (and maybe others) for their feedback especially
regarding the unit of frequency to use.

Corresponding to flashrom svn r1571.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

 - allows for compilation with -Werror=shadow,
 - use extended line limit to fix the most awful line breaks.

Corresponding to flashrom svn r1570.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

And remove the unused force parameter.

Corresponding to flashrom svn r1569.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>