GitLab

Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.

Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").

Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>

Corresponding to flashrom svn r1297.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Anton Kochkov <anton.kochkov@gmail.com>
Acked-by: Anton Kochkov <anton.kochkov@gmail.com>

This moves 99.5% of the .data section to .rodata (which ends up in .text).

Corresponding to flashrom svn r1293.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

Flashrom currently only supports exactly one Super I/O or Embedded
Controller, and this means quite a few notebooks and a small subset of
desktop/server boards cannot be handled reliably and easily.
Allow detection and initialization of up to 3 Super I/O and/or EC chips.

WARNING! If a Super I/O or EC responds on multiple ports (0x2e and
0x4e), the code will do the wrong thing (namely, initialize the hardware
twice). I have no idea if we should handle such situations, and whether
we should ignore the second chip with identical ID or not. Initializing
the hardware twice for the IT87* family is _not_ a problem, but I don't
know how well IT85* can handle it (and whether IT85* would listen at
more than one port anyway).

Corresponding to flashrom svn r1289.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Thanks to Thomas Schneider for testing on a board with ITE IT87* SPI.
Test report (success) is here: http://paste.flashrom.org/view.php?id=379

Thanks to David Hendricks for testing on a Google Cr-48 laptop with
ITE IT85* EC SPI. Test report (success) is here:
http://www.flashrom.org/pipermail/flashrom/2011-April/006275.html

Acked-by: David Hendricks <dhendrix@google.com>

Fix compilation if everything except CONFIG_SATAMV is no.
Do not compile in PCI support for wiki printing if no PCI devices are
supported.

Corresponding to flashrom svn r1278.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Simplify pcidev_init by killing the vendorid parameter which was pretty
useless anyway since it was present in the pcidevs parameter as well.

This also allows us to handle multiple programmers with different vendor
IDs in the same driver.

Fix compilation of flashrom with only the nicrealtek driver.

Corresponding to flashrom svn r1274.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

It uses a Marvell 88SX7042 SATA controller internally which has access
to a separate flash chip hosting the option ROM.

Thanks to Angelbird Ltd for sponsoring development of this driver!

I expect the code to work for that SATA controller even if it is not
part of the Angelbird SSD.

Corresponding to flashrom svn r1258.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

Don't print the local memory flash chip address on programmers that
don't actually map the flash chip into local memory (like the dediprog)
because the value does not make sense there.

This version was reworked / rewritten by Mathias Krause to have less
"impact"

Corresponding to flashrom svn r1253.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Mathias Krause <mathias.krause@secunet.com>

This patch reduces the stack usage by declaring 'const' stack variables
as 'static const' so they end up in the .rodata section instead of being
copied from there to the stack for every invocation of the corresponding
function.

As a plus we end up in having a smaller binary as the "copy from .rodata
to stack" code isn't emitted by the compiler any more (roughly -100
bytes).

Corresponding to flashrom svn r1252.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>

Suggested by Michael Karcher.

Corresponding to flashrom svn r1246.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Update a few comments and messages to improve readability.

Corresponding to flashrom svn r1244.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

The project is in the the process of designing and making a complete,
open source, graphics card. More info at http://wiki.opengraphics.org.

The first development card is a PCI add in card containing a couple of
FPGAs and a couple of serial flash chips (amongst other things). The
FPGAs are called XP10 and S3 (their part numbers). The XP10 contains its
own flash and does not need to be programmed by flashrom - it ensures
that the device can enumerate on the PCI bus without needing further
configuration.

The larger FPGA is the S3. This is configured from a large SPI flash
(2 MBytes). The second SPI flash is used to store the VGA BIOS. It is
smaller (128 KBytes). This patch adds support for programming either of
the two SPI flash chips.

The programmer device takes one configuration option which selects which
of the two flash chips is accessed. This must be set to either "cprom"
or "bprom". (The project refers to th...

Lock access may involve flash chip registers which will not be mapped
if automatic detection failed.

Corresponding to flashrom svn r1240.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1238.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Verify_range() and check_erased_range() check each page separately.
While that may have seemed like a good idea back when the code was
introduced, it has no benefits for any of the chips where we support
write because all of them handle cross-page reads nicely.
The only class of chips where this change could be a problem is chips
with non power of two sector sizes which have gaps in the address space.
We simply require their read functions to provide gap-free results
and leave it at that.

Corresponding to flashrom svn r1233.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

This means all chipset enables etc. will be undone on shutdown.
Reversible PCI config space writes now use rpci_write_*().
PCI config space writes which are one-shot (e.g. communication via
config space) should continue to use the permanent pci_write_*
variants.

Extend the number of available register_shutdown slots to 32.

Corresponding to flashrom svn r1232.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Add a generic voltage parameter parser.
Move tolower_string() from dummyflasher.c to flashrom.c to make it
available everywhere.

Corresponding to flashrom svn r1226.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coreboot.org>

Avoid two memory leaks in doit() which were unproblematic for flashrom
because flashrom terminates after finishing doit(). Rename oldcontents
to curconents in erase_and_write_block_helper(). Unify the code for
all granularities in get_next_write(). Return write length from
get_next_write() instead of filling it as referenced parameter.

Thanks to Michael Karcher for pointing out the first two issues. Thanks
to David Hendricks for pointing out the third issue and suggesting a way
to unify that code.

Corresponding to flashrom svn r1225.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

If you write an image full of 0xff, flashrom will erase and detect that
no write is needed. If you write an image which differs only in some
parts from the current flash contents, flashrom will detect that and not
touch unchanged areas.

Fix a long-standing bug in need_erase() for 256 byte granularity as
well.

Nice side benefit: Detailed progress printing. S means skipped E means
erased W means written

Thanks to Andrew Morgan for testing countless iterations of this patch.
Thanks to Richard A. Smith for testing on Dediprog SF100. Thanks to
David Hendricks for the review and for creating a partial write torture
test script and testing with it on Intel NM10 and AMD SB700 SPI. Thanks
to Idwer Vollering for testing with Intel SPI NICs. Thanks to Rudolf
Marek for testing on AMD SB710 and SiI SATA controllers. Thanks to
Michael Karcher for the review.

Corresponding to flashrom svn r1224.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

This will allow flashrom to skip erase of already-erased blocks and to
skip write of blocks which already have the wanted contents.

Avoid emergency messages by checking if the chip contents after a failed
write operation (erase/write) are unchanged.

Keep the emergency messages after a failed pure erase. That part is
debatable because if someone wants erase, he pretty sure doesn't care
about the flash contents anymore.

Please note that this introduces additional overhead of a full chip read
before write. This is frowned upon by people with slow programmers. A
followup patch will make this configurable.

Corresponding to flashrom svn r1215.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coreboot.org>

Doit() is the monster function we split off from main() when we created
cli_classic() and tried to introduce some abstraction.

doit() is a poster child of WTFs on an astronomic scale.

Make doit() less bad by factoring out self-contained code.

Corresponding to flashrom svn r1212.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

The inner write functions which handle partial write are renamed to the
original name of their wrappers. The write wrappers are removed.

Corresponding to flashrom svn r1211.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Andrew Morgan <ziltro@ziltro.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Sean Nelson <audiohacked@gmail.com> 
Acked-by: Sean Nelson <audiohacked@gmail.com> 

Flashrom had an implicit erase-on-write for most flash chip and
programmer drivers, but it was not entirely consistent.

Some drivers had their own hand-rolled partial update functionality
which made handling partial updates from generic code impossible.

Move implicit erase out of chip drivers, and kill some dead erase
functions at the same time. A full chip erase is now performed in the
generic code for all flash chips on write, and after that the whole chip
is written.

Corresponding to flashrom svn r1206.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

A lot of messages sent@flashrom.org just have "flashrom -V" as the subject. 
Ask people to include more information in the subject line to make life
easier for developers/supporters.

Corresponding to flashrom svn r1202.
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Flashrom -L output did not contain a list of programmers nor were
all programmers listed. Fix it and mention at least the name of each
programmer. Wiki output is unchanged, and will need separate fixups.

Corresponding to flashrom svn r1199.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This doesn't include changes to the frontend which must be
done separately, so this won't work out of the box.
This code was tested on hardware.

Corresponding to flashrom svn r1184.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested on a 82541PI (0x8086, 0x107c) using 32-bit hardware.

The last line in nicintel_request_spibus() could be changed so that FL_BUSY
is used instead.

Shortened sample log:
[...]
Found "Intel 82541PI Gigabit Ethernet Controller" (8086:107c, BDF 01:03.0).
Found chip "ST M25P10.RES" (128 KB, SPI) at physical address 0xfffe0000.
Multiple flash chips were detected: M25P05.RES M25P10.RES
Please specify which chip to use with the -c <chipname> option.
[...]

Corresponding to flashrom svn r1151.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Fix incorrect whitespace, indentation, and coding style in some places.

 - Drop '/**' Doxygen comments, we don't use Doxygen. Even if we would use
   it, the comments are useless as we don't have any Doxygen markup in there.

 - Use consistent vendor name spelling as per current website (NVIDIA,
   abit, GIGABYTE).

 - Use consistent / common format for "Suited for:" lines in board_enable.c.

 - Add some missing 'void's in functions taking no arguments.

 - Add missing fullstops in sentences, remove them from non-sentences (lists).

Corresponding to flashrom svn r1134.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).

The new header structure is as follows (and yes, improvements are
possible):
flashchips.h  flash chip IDs
chipdrivers.h  chip-specific read/write/... functions
flash.h  common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h  programmer specific functions
coreboot_tables.h  header from coreboot, internal programmer only
spi.h SPI command definitions

Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

To use the RayeR driver, run
flashrom -p rayer_spi -V

Known bugs/limitations:
- Won't compile/work on non-x86 architectures.
- Will always use direct port I/O access.

Log follows:

flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC 
4.3.2, little endian
Calibrating delay loop... OK.
Initializing rayer_bitbang_spi programmer
Using port 0x378 as I/O base for parallel port access.
...
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 
0xc2, id2 0x2015
...
Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 
0xffe00000.
...
No operations were specified.

Corresponding to flashrom svn r1093.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Martin Rehak <rayer@seznam.cz>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Corresponding to flashrom svn r1091.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Newer llvm/clang versions (since r102686) have a __clang_version__ macro
which can be used to print the exact clang version.

Fix a case where chip_to_probe was referenced twice via extern, once at
the function level and once in a global include file. Found by latest
clang.

Corresponding to flashrom svn r1087.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Improve error checking in file write, chip read and chip verify.
Refactor the read routines a bit to split reading from file writing.

Log for a failed read:
[...]
Found chip "Winbond W25x16" (2048 KB, SPI) at physical address
0xffe00000.
Reading flash... Invalid OPCODE 0x03
Read operation failed!
FAILED.

Corresponding to flashrom svn r1079.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stephen Kou <stephen@hyarros.com>

Corresponding to flashrom svn r1078.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

That allows us to use erase region walking for a combined erase/write
action, and is a prerequisite for partial flashing,

Corresponding to flashrom svn r1077.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Make programmer_param static by converting all users to extract_programmer_param.
Programmer parameters can no longer be separated with a
colon, they have to be separated with a comma.

Corresponding to flashrom svn r1072.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

This led to wildly differing syntax for programmer parameters, and
it also voids pretty much every assumption you could make about
programmer_param. The latter is a problem for libflashrom.

Use extract_param everywhere, clean up related code and make it more
foolproof. Add two instances of exit(1) where we have no option to
return an error. Remove six instances of exit(1) where returning an
error was possible.

WARNING: This changes programmer parameter syntax for a few programmers!

Corresponding to flashrom svn r1070.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

If a programmer has untested or non-working write/erase code, but
probing/reading works, it makes sense to protect the user against
write/erase accidents. This feature will be used by the Nvidia MCP SPI
code, and it also might make sense for the gfxnvidia driver which has
non-working write/erase.

Corresponding to flashrom svn r1069.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Constify variables where possible.
Initialize programmer-related variables explicitly in programmer_init to
allow running programmer_init from a clean state after
programmer_shutdown.
Prohibit registering programmer shutdown functions before init or after
shutdown.
Kill some dead code.
Rename global variables with namespace-polluting names.
Use a previously unused locking helper function in sst49lfxxxc.c.

This is needed for libflashrom.

Effects on the binary size of flashrom are minimal (300 bytes
shrinkage), but the data section shrinks by 4384 bytes, and that's a
good thing if flashrom is operating in constrained envionments.

Corresponding to flashrom svn r1068.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Some instability remains, but that may be due to hardware problems in
the specific card (Netgear FA311) used for testing.

Corresponding to flashrom svn r1039.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>