Refine text of requests to send logs

A lot of messages sent@flashrom.org just have "flashrom -V" as the subject. 
Ask people to include more information in the subject line to make life
easier for developers/supporters.

Corresponding to flashrom svn r1202.
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

board_enable.c

@@ -433,7 +433,9 @@ int it8705f_write_enable(uint8_t port)
 			max_rom_decode.parallel = 1024 * 1024;
 			msg_pinfo("IT8705F with very unusual settings. Please "
 				  "send the output of \"flashrom -V\" to \n"
-				  "flashrom@flashrom.org to help us finish "
+				  "flashrom@flashrom.org with "
+				  "IT8705: your board name: flashrom -V\n"
+				  "as the subject to help us finish "
 				  "support for your Super I/O. Thanks.\n");
 			ret = 1;
 		} else if (tmp & 0x08) {
@@ -2097,7 +2099,8 @@ int board_flash_enable(const char *vendor, const char *part)
 		board = NULL;
 		} else {
 		        msg_pinfo("NOTE: Running an untested board enable procedure.\n"
-		               "Please report success/failure to flashrom@flashrom.org.\n");
+		               "Please report success/failure to flashrom@flashrom.org\n"
+		               "with your board name and SUCCESS or FAILURE in the subject.\n");
 		}
         }
 

chipset_enable.c

@@ -939,7 +939,9 @@ static int enable_flash_mcp6x_7x(struct pci_dev *dev, const char *name)
 	}
 out_msg:
 	msg_pinfo("Please send the output of \"flashrom -V\" to "
-		  "flashrom@flashrom.org to help us finish support for your "
+		  "flashrom@flashrom.org with\n"
+		  "your board name: flashrom -V as the subject to help us "
+		  "finish support for your\n"
 		  "chipset. Thanks.\n");
 
 	return ret;
@@ -1195,8 +1197,11 @@ int chipset_flash_enable(void)
 			continue;
 		if (ret != -2) {
 			msg_pinfo("WARNING: unexpected second chipset match: "
-			       "\"%s %s\"\nignoring, please report lspci and "
-			       "board URL to flashrom@flashrom.org!\n",
+				    "\"%s %s\"\n"
+				  "ignoring, please report lspci and board URL "
+				    "to flashrom@flashrom.org\n"
+				  "with 2CHIPSET: your board name in the "
+				    "subject line.\n",
 				chipset_enables[i].vendor_name,
 					chipset_enables[i].device_name);
 			continue;

flashrom.c

@@ -1314,7 +1314,8 @@ void emergency_help_message(void)
 {
 	msg_gerr("Your flash chip is in an unknown state.\n"
 		"Get help on IRC at irc.freenode.net (channel #flashrom) or\n"
-		"mail flashrom@flashrom.org!\n"
+		"mail flashrom@flashrom.org with FAILED: your board name in "
+		  "the subject line!\n"
 		"-------------------------------------------------------------"
 		  "------------------\n"
 		"DO NOT REBOOT OR POWEROFF!\n");
@@ -1496,8 +1497,8 @@ void check_chip_supported(struct flashchip *flash)
 			    "operations you tested (-V, -Vr,\n"
 			  "-Vw, -VE), and mention which mainboard or "
 			    "programmer you tested.\n"
-			  "Thanks for your help!\n"
-			  "===\n");
+			  "Please mention your board in the subject line. "
+			    "Thanks for your help!\n");
 	}
 }
 

pcidev.c

@@ -66,9 +66,11 @@ uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar,
 
 		if (devs[i].status == NT) {
 			msg_pinfo("===\nThis PCI device is UNTESTED. Please "
-			       "report the 'flashrom -p xxxx' output \n"
-			       "to flashrom@flashrom.org if it works "
-			       "for you. Thank you for your help!\n===\n");
+				  "report the 'flashrom -p xxxx' output \n"
+				  "to flashrom@flashrom.org if it works "
+				  "for you. Please add the name of your\n"
+				  "PCI device to the subject. Thank you for "
+				  "your help!\n===\n");
 		}
 
 		return addr;