GitLab

Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).

The new header structure is as follows (and yes, improvements are
possible):
flashchips.h  flash chip IDs
chipdrivers.h  chip-specific read/write/... functions
flash.h  common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h  programmer specific functions
coreboot_tables.h  header from coreboot, internal programmer only
spi.h SPI command definitions

Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Convert all PCI-based external programmers to use special little-endian
accessors for all MMIO regions of PCI devices. This patch does _not_
touch the internal programmer (which is PCI-based as well).

Huge thanks go to Misha Manulis who worked with me to create a first
version of this patch for the satasii programmer based on modification
of generic code.

Huge thanks also go to Segher Boessenkool for suggesting the pci_mmio_
prefix for the abstraction layer.

NOTE to package maintainers: With this patch, compilation and usage of
flashrom should be safe on x86, x86_64, MIPS (little and big endian) and
PowerPC (big endian).

The internal programmer is disabled on non-x86/x86_64 (but it
compiles). The atahpt, nic3com, nicnatsemi, nicrealtek and rayer_spi
can not be compiled on non-x86/x86_64 because port space I/O is
not (yet) supported. Please compile with default settings on
x86/x86_64 and with the following settings on all other architectures:
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no CONFIG_NICNATSEMI=no
CONFIG_RAYER_SPI=no

Corresponding to flashrom svn r1111.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>

This allows USB-based external programmers to be used by non-root users
(which are in the 'plugdev' group). The file is to be installed by the
distros into the proper place (not sure if this is distro-specific). On
Debian the file will end up in /etc/udev/rules.d/z60_flashrom.rules.

On some systems the 'plugdev' group might have to adapted to whatever
the respective distro uses.

The following devices are listed so far:

 - Amontec JTAGkey(2)
 - Buspirate
 - Dediprog SF100
 - DLP Design DLP-USB1232H
 - FTDI FT4232H Mini-Module

Corresponding to flashrom svn r1110.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

To be safe, the onboard video of the nView edition of this board has
been included in the match. If other NF-M2 editions have the same board
enable, the match should be broadened

lspci/superiotool
  http://www.coreboot.org/pipermail/flashrom/2010-April/002909.html



No success report, thus committed as untested.

Corresponding to flashrom svn r1109.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The SATA controller matched in the board enable is not always present
with that ID (that's the 2-port ICH9 SATA IDE controller), but (depending
on board revision/edition or BIOS settings an ICH9 SATA RAID controller
appears instead. This patches matches on the SMBus function in the
south bridge instead of the SATA controller.

Non-working board reported by: Gunter Keilholz <gunter.keilholz@googlemail.com>
lspci/superiotool:
  http://www.coreboot.org/pipermail/flashrom/2010-June/003591.html



Corresponding to flashrom svn r1108.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-July/003889.html



Corresponding to flashrom svn r1107.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Tested-by: Alex Loktionoff <oxy-loktionoff@mail.ru>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Non-working board reported by idlogin / Putlinuxonit <putlinuxonit@gmail.com>
lspci/superiotool:
  http://www.coreboot.org/pipermail/flashrom/2010-May/003330.html


No success report, so committed as untested.

Corresponding to flashrom svn r1106.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Non-working board reported by: Anders Jenbo <anders@jenbo.dk>
lspci/superiotool:
  http://www.coreboot.org/pipermail/flashrom/2010-June/003346.html



no success report, so committed as untested.

Corresponding to flashrom svn r1105.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Broken by r1098

Corresponding to flashrom svn r1104.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1103.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

lspci/superiotool:
  http://www.coreboot.org/pipermail/flashrom/2010-July/003869.html



Corresponding to flashrom svn r1102.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Mattias Mattsson <vitplister@gmail.com>

No response from reporter - committed as "untested".

Corresponding to flashrom svn r1101.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1100.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Tested-by: František Kučera <linux@frantovo.cz>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1099.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Smarter version could decide whether SPI is vital or not depending on
straps. Straps are currently implemented for ICH7. EP80579 is in the comment,
PCH of 5 Series/3400 Series has "LPC, reserved, PCI, SPI".

Corresponding to flashrom svn r1098.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1097.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

http://www.amictechnology.com/pdf/A25L20P.pdf covers:
AMIC A25L05PT
AMIC A25L05PU
AMIC A25L10PT
AMIC A25L10PU
AMIC A25L20PT
AMIC A25L20PU
http://www.amictechnology.com/pdf/A25L16P.pdf

 covers:
AMIC A25L16PT
AMIC A25L16PU

Clarify the situation surrounding the A25L40PT and A25L40PU chips which
share the same RDID values, despite the fact that their erase block
layouts are different.  Rudolf Marek tested and confirmed the distinct
erase block layouts of these chips.

Add a pretty-printer for the AMIC SPI chip status register
Add a generic AMIC chip type.

Corresponding to flashrom svn r1096.
Signed-off-by: Daniel Lenski <dlenski@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Change the nicnatsemi address mask to use MA0-MA16 and set the maximum
decode size to 128KB.

Corresponding to flashrom svn r1095.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1094.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

To use the RayeR driver, run
flashrom -p rayer_spi -V

Known bugs/limitations:
- Won't compile/work on non-x86 architectures.
- Will always use direct port I/O access.

Log follows:

flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC 
4.3.2, little endian
Calibrating delay loop... OK.
Initializing rayer_bitbang_spi programmer
Using port 0x378 as I/O base for parallel port access.
...
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 
0xc2, id2 0x2015
...
Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 
0xffe00000.
...
No operations were specified.

Corresponding to flashrom svn r1093.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Martin Rehak <rayer@seznam.cz>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Corresponding to flashrom svn r1092.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Corresponding to flashrom svn r1091.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Fix a bug where 4 GB of spaces would be printed per line if a vendor
name was longer than 10 chars.

This patch is needed to commit MoselVitelic chip support.

Corresponding to flashrom svn r1090.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Use the BAR value returned by pcidev_init which automatically applies
the correct BAR mask for the drkaiser driver. Truncate flash chip
addresses to fit into the 128 kB memory window for drkaiser and pick the
same window size for gfxnvidia.

Uwe tested all operations successfully on a Dr. Kaiser card.

Corresponding to flashrom svn r1089.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Needed on the original Xbox running Xebian and a few other ancient
systems.

Corresponding to flashrom svn r1088.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Alec Wright <alecjw@member.fsf.org>

Newer llvm/clang versions (since r102686) have a __clang_version__ macro
which can be used to print the exact clang version.

Fix a case where chip_to_probe was referenced twice via extern, once at
the function level and once in a global include file. Found by latest
clang.

Corresponding to flashrom svn r1087.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This chip is used on some Xbox versions.

Corresponding to flashrom svn r1086.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Alec Wright <alecjw@member.fsf.org>

Change the SPI bitbanging core to fix a subtle bug (which had no
effect so far) and to make integration of the RayeR SPIPGM and Nvidia
MCP6x/MCP7x SPI patches easier. Kill a few global variables and require
explicit initialization of bitbanging delay.

A big to Johannes Sjölund for testing an earlier version of the code as
part of the Nvidia MCP6x/MCP7x SPI bitbanging patch.

Corresponding to flashrom svn r1085.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

This removes the need of allocating an extra buffer, but also removes
the possibility of having the data read back during the initial write
phase for debugging purposes.

Compile tested, no functional testing.

Corresponding to flashrom svn r1084.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Use full-chip write function on Fujitsu MBM29F400TC and ST M29F400BT.
Add support for ST M29F400BB.

Corresponding to flashrom svn r1083.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Actually check if the unlock worked instead of just assuming it worked.

Corresponding to flashrom svn r1082.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Use this instead of the open-coding variant that only aborts after it is too late.

Corresponding to flashrom svn r1081.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

However, wrap the write functions in a compat layer to allow converting
the rest of flashrom later. Tested on Intel NM10 by David Hendricks.

Corresponding to flashrom svn r1080.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Improve error checking in file write, chip read and chip verify.
Refactor the read routines a bit to split reading from file writing.

Log for a failed read:
[...]
Found chip "Winbond W25x16" (2048 KB, SPI) at physical address
0xffe00000.
Reading flash... Invalid OPCODE 0x03
Read operation failed!
FAILED.

Corresponding to flashrom svn r1079.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stephen Kou <stephen@hyarros.com>

Corresponding to flashrom svn r1078.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

That allows us to use erase region walking for a combined erase/write
action, and is a prerequisite for partial flashing,

Corresponding to flashrom svn r1077.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

A bit was masked, but not shifted, and that led to worst-case accesses
of index 24 in an array with 4 members.

I've improved readability in the variable declaration block as well.

Thanks to Stephen Kou for reporting the bug.

Corresponding to flashrom svn r1076.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stephen Kou <stephen@hyarros.com>

This is a 1 MB SPI chip that seems to be straightforwardly related
to the AMIC A25L40PU, which has half the capacity but is otherwise
identical.

Datasheet is at http://www.amictechnology.com/pdf/A25L80P.pdf



flashrom -VE, -Vr, and -Vw has been tested using the AMD SB7x0
interface. Everything works fine... at least, I used it to upgrade my
BIOS and I've been able to reboot.

Corresponding to flashrom svn r1075.
Signed-off-by: Daniel Lenski <dlenski@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

SPI chips never should use read_memmapped. The SPI master code might
decide that read_memmapped is fine for this chip, though, in a lower
layer.

Corresponding to flashrom svn r1074.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Autodetect the ITE IT8705 Super I/O and enable flash writes if it
performs LPC->Parallel translation. Remove board enables which triggered
the IT8705 write enable manually. Change the IT87 SPI special case to
cover IT87 LPC->SPI and LPC->Parallel translation.

Corresponding to flashrom svn r1073.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested on Syntax SV266A.
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>

Tested on Shuttle AK38N, all operations work fine.
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>