Skip to content

GitLab

Commit df90d3a3 authored by Daniel Lenski's avatar Daniel Lenski Committed by Carl-Daniel Hailfinger
Browse files

Add support for the following AMIC SPI chips 

http://www.amictechnology.com/pdf/A25L20P.pdf covers:
AMIC A25L05PT
AMIC A25L05PU
AMIC A25L10PT
AMIC A25L10PU
AMIC A25L20PT
AMIC A25L20PU
http://www.amictechnology.com/pdf/A25L16P.pdf

 covers:
AMIC A25L16PT
AMIC A25L16PU

Clarify the situation surrounding the A25L40PT and A25L40PU chips which
share the same RDID values, despite the fact that their erase block
layouts are different.  Rudolf Marek tested and confirmed the distinct
erase block layouts of these chips.

Add a pretty-printer for the AMIC SPI chip status register
Add a generic AMIC chip type.

Corresponding to flashrom svn r1096.
Signed-off-by: default avatarDaniel Lenski <dlenski@gmail.com>
Acked-by: default avatarCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
parent 74a828a6
Hide whitespace changes
Inline Side-by-side
Showing with 309 additions and 6 deletions
flashchips.c
View file @ df90d3a3
......@@ -1169,14 +1169,207 @@ struct flashchip flashchips[] = {
.read = read_memmapped,
},
/* The next two chip definitions have top/bottom boot blocks, but has no
device differentiation between the two */
{
.vendor = "AMIC",
.name = "A25L05PT",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L05PT,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A25L05PU",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L05PU,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A25L10PT",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L10PT,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 1},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A25L10PU",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L10PU,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 1},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A25L20PT",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L20PT,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A25L20PU",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L20PU,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
/* The A25L40P{T,U} chips are distinguished by their
* erase block layouts, but without any distinction in RDID.
* This inexplicable quirk was verified by Rudolf Marek
* and discussed on the flashrom mailing list on 2010-07-12.
*/
{
.vendor = "AMIC",
.name = "A25L40PT",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L40P,
.model_id = AMIC_A25L40PT,
.total_size = 512,
.page_size = 256,
.tested = TEST_OK_PRW,
......@@ -1208,7 +1401,7 @@ struct flashchip flashchips[] = {
.name = "A25L40PU",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L40P,
.model_id = AMIC_A25L40PU,
.total_size = 512,
.page_size = 256,
.tested = TEST_OK_PRW,
......@@ -1267,6 +1460,76 @@ struct flashchip flashchips[] = {
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A25L16PT",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L16PT,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 31},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A25L16PU",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L16PU,
.total_size = 2048,
.page_size = 256,
.tested = TEST_OK_PRW,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 31},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A29002B",
......@@ -6677,6 +6940,21 @@ struct flashchip flashchips[] = {
.read = read_memmapped,
},
{
.vendor = "AMIC",
.name = "unknown AMIC SPI chip",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "Atmel",
.name = "unknown Atmel SPI chip",
......
flashchips.h
View file @ df90d3a3
......@@ -75,8 +75,19 @@
#define AMIC_ID 0x7F37 /* AMIC */
#define AMIC_ID_NOPREFIX 0x37 /* AMIC */
#define AMIC_A25L40P 0x2013
#define AMIC_A25L80P 0x2014
#define AMIC_A25L05PT 0x2020
#define AMIC_A25L05PU 0x2010
#define AMIC_A25L10PT 0x2021
#define AMIC_A25L10PU 0x2011
#define AMIC_A25L20PT 0x2022
#define AMIC_A25L20PU 0x2012
#define AMIC_A25L40PT 0x2013 /* Datasheet says T and U have
same device ID. Confirmed by
hardware testing. */
#define AMIC_A25L40PU 0x2013
#define AMIC_A25L80P 0x2014 /* Seems that no A25L80PT exists */
#define AMIC_A25L16PT 0x2025
#define AMIC_A25L16PU 0x2015
#define AMIC_A29002B 0x0d
#define AMIC_A29002T 0x8C /* Same as A290021T */
#define AMIC_A29040B 0x86
......
spi25.c
View file @ df90d3a3
......@@ -327,6 +327,16 @@ void spi_prettyprint_status_register_common(uint8_t status)
"%sset\n", (status & (1 << 0)) ? "" : "not ");
}
/* Prettyprint the status register. Works for
* AMIC A25L series
*/
void spi_prettyprint_status_register_amic_a25l(uint8_t status)
{
msg_cdbg("Chip status register: Status Register Write Disable "
"(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not ");
spi_prettyprint_status_register_common(status);
}
/* Prettyprint the status register. Works for
* ST M25P series
* MX MX25L series
......@@ -389,6 +399,10 @@ void spi_prettyprint_status_register(struct flashchip *flash)
status = spi_read_status_register();
msg_cdbg("Chip status register is %02x\n", status);
switch (flash->manufacture_id) {
case AMIC_ID:
if ((flash->model_id & 0xff00) == 0x2000)
spi_prettyprint_status_register_amic_a25l(status);
break;
case ST_ID:
if (((flash->model_id & 0xff00) == 0x2000) ||
((flash->model_id & 0xff00) == 0x2500))
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment

Powered by Integricloud