Detect IP35 by the SMBus bridge instead of the SATA controller

The SATA controller matched in the board enable is not always present
with that ID (that's the 2-port ICH9 SATA IDE controller), but (depending
on board revision/edition or BIOS settings an ICH9 SATA RAID controller
appears instead. This patches matches on the SMBus function in the
south bridge instead of the SATA controller.

Non-working board reported by: Gunter Keilholz <gunter.keilholz@googlemail.com>
lspci/superiotool:
  http://www.coreboot.org/pipermail/flashrom/2010-June/003591.html



Corresponding to flashrom svn r1108.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

board_enable.c

@@ -1678,7 +1678,7 @@ const struct board_pciid_enable board_pciid_enables[] = {
 #if defined(__i386__) || defined(__x86_64__)
 	{0x10DE, 0x0547, 0x147B, 0x1C2F,  0x10DE, 0x0548, 0x147B, 0x1C2F, NULL,          NULL,         NULL,          "Abit",        "AN-M2",                 0,   NT, nvidia_mcp_gpio2_raise},
 	{0x8086, 0x24d3, 0x147b, 0x1014,  0x8086, 0x2578, 0x147b, 0x1014, NULL,          NULL,         NULL,          "Abit",        "IC7",                   0,   NT, intel_ich_gpio23_raise},
-	{0x8086, 0x2926, 0x147b, 0x1084,  0x11ab, 0x4364, 0x147b, 0x1084, NULL,          NULL,         NULL,          "Abit",        "IP35",                  0,   OK, intel_ich_gpio16_raise},
+	{0x8086, 0x2930, 0x147b, 0x1084,  0x11ab, 0x4364, 0x147b, 0x1084, NULL,          NULL,         NULL,          "Abit",        "IP35",                  0,   OK, intel_ich_gpio16_raise},
 	{0x8086, 0x2930, 0x147b, 0x1083,  0x10ec, 0x8167, 0x147b, 0x1083, NULL,          NULL,         NULL,          "Abit",        "IP35 Pro",              0,   OK, intel_ich_gpio16_raise},
 	{0x10de, 0x0050, 0x147b, 0x1c1a,       0,      0,      0,      0, NULL,          NULL,         NULL,          "Abit",        "KN8 Ultra",             0,   NT, nvidia_mcp_gpio2_lower},
 	{0x10de, 0x01e0, 0x147b, 0x1c00,  0x10de, 0x0060, 0x147B, 0x1c00, NULL,          NULL,         NULL,          "Abit",        "NF7-S",                 0,   OK, nvidia_mcp_gpio8_raise},