GitLab

No behavioural changes, just equivalence transformations.

Corresponding to flashrom svn r1209.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The currently used write functions (wrappers) all use helpers which
perform the actual write (inner functions).

The signature of the write wrappers is: int write_chip(struct flashchip
*flash, uint8_t * buf);

The signature of the inner write functions varied a lot. This patch
changes them to: int write_part(struct flashchip *flash, uint8_t *src,
int start, int len);

Did you know that flashrom has only 8 inner write functions for all
flash chips? write_page_write_jedec_common write_sector_jedec_common
write_sector_28sf040 spi_chip_write_256_new spi_chip_write_1_new
spi_aai_write_new write_page_82802ab write_page_m29f400bt

Export all inner write functions.

Change the function signature of wait_82802ab to eliminate single-use
variables.

Remove an error message in write_page_m29f400bt which was printed for
every byte written regardless of success.

Add sharplhf00l04.c to the list of flash chip drivers in the Makefile.
While the functions in there are unused, I suspect we will need them
later, and by hooking the file up we ensure that compilation won't
break.

Corresponding to flashrom svn r1208.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Progress printing should be handled in the generic code, and will end up
there once partial write is possible.

Corresponding to flashrom svn r1207.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Flashrom had an implicit erase-on-write for most flash chip and
programmer drivers, but it was not entirely consistent.

Some drivers had their own hand-rolled partial update functionality
which made handling partial updates from generic code impossible.

Move implicit erase out of chip drivers, and kill some dead erase
functions at the same time. A full chip erase is now performed in the
generic code for all flash chips on write, and after that the whole chip
is written.

Corresponding to flashrom svn r1206.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1204.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

CONFIG_BITBANG_SPI was not selected if CONFIG_NICINTEL_SPI was on by default.
Wiki output was missing all flash chips if CONFIG_INTERNAL was not
selected.
Use correct type for toupper()/tolower()/isspace() functions.
Specify software requirements in a generic way.
Non-x86 compilation does not work with the default programmer set, so
list the make parameters which result in a working build.

Corresponding to flashrom svn r1203.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

A lot of messages sent@flashrom.org just have "flashrom -V" as the subject. 
Ask people to include more information in the subject line to make life
easier for developers/supporters.

Corresponding to flashrom svn r1202.
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

SPI write status register (WRSR) may take longer than 100 ms, and it
makes sense to poll for completion in 10 ms steps until 5 s are over.
This patch complements r1115.

Corresponding to flashrom svn r1201.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Joshua Roys <roysjosh@gmail.com>

Fix PCI device ID printing.
Remove personal e-mail addresses from the man page, point people to
flashrom@flashrom.org instead.

Corresponding to flashrom svn r1200.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Flashrom -L output did not contain a list of programmers nor were
all programmers listed. Fix it and mention at least the name of each
programmer. Wiki output is unchanged, and will need separate fixups.

Corresponding to flashrom svn r1199.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The Direct I/O library for Mac OS X is now called DirectHW to make sure
people can find it via an internet search.

DirectIO was a generic name for a concept and thus not a good
distinguisher for a library.

Corresponding to flashrom svn r1198.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Update programmer parameter documentation.

Corresponding to flashrom svn r1197.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1196.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add a clarifying comment about why low memory is never unmapped.

Corresponding to flashrom svn r1195.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Rudolf Marek <r.marek@assembler.cz>

Use AAI write for SST SST25VF032B.
Speedup from 228 to 113 seconds.

Use page (256 byte) write for SST SST25VF064C.
Speedup from 3091 to 123 seconds.

Corresponding to flashrom svn r1194.
Signed-off-by: Helge Wagner <helge.wagner@ge.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1193.
Signed-off-by: Helge Wagner <helge.wagner@ge.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This also adds (and marks as tested) a chipset-enable for the SiS 741.

All operations successfully tested on hardware.

lspci/superiotool:
  http://www.flashrom.org/pipermail/flashrom/2010-September/004710.html



Corresponding to flashrom svn r1192.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Match on ethernet and north bridge.

This is tested on an OptiPlex GX1 400L+ but will probably work for
the whole GX1 series as they all share the same vendor BIOS.

lspci/flashrom output
http://www.flashrom.org/pipermail/flashrom/2010-July/004042.html

lspci output (OptiPlex GX1 unknown model)
http://www.coreboot.org/pipermail/coreboot/2010-May/058040.html

superiotool output (OptiPlex GX1 266L+)
http://www.flashrom.org/pipermail/flashrom/2009-July/000207.html

lspci/dmidecode output (OptiPlex GX1 266L+)
http://www.coreboot.org/pipermail/coreboot/2009-July/050958.html



Corresponding to flashrom svn r1191.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Not sure if this is the final/correct fix, but for now it definately
fixes writes on FT2232H hardware. I have tested this on both, the
DLP Design DLP-USB1232H, and the openbiosprog-spi hardware.

Thanks to Joshua Roys <roysjosh@gmail.com> for the hint on IRC.

Corresponding to flashrom svn r1190.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Strip package prefix in constant names (everything before "28F").

Prefix every constant name with INTEL_

Sort intel chip constants by ID.

Rename the following constants to their "canonical" name:

P28F400BT (0x70  -> INTEL_28F400T (28F400BV/BX/CE/CV-T)
P28F400BB (0x71) -> INTEL_28F400B (28F400BV/BX/CE/CV-B)
P28F004BT (0x78) -> INTEL_28F004T (28F004B5/BE/BV/BX-T)
P28F004BB (0x79) -> INTEL_28F004B (28F004B5/BE/BV/BX-B)
E_28F008S5 (0xA6) -> INTEL_28F008S3 (28F008S3/S5/SC)
E_28F004S5 (0xA7) -> INTEL_28F004S3 (28F008S3/S5/SC)
P28F001BXT (0x94) -> INTEL_28F001T (28F001BN/BX-T)
P28F001BXB (0x95) -> INTEL_28F001B (28F001BN/BX-B)
E_28F016S5 (0xAA) -> INTEL_28F016S3 (28F016S3/S5/SC)

Add chip IDs for the following chips:

28F320J5
28F640J5
28F320J3
28F640J3
28F128J3
28F256J3
28F200BL/BV/BX/CV-T
28F200BL/BV/BX/CV-B
28F002BL/BV/BX-B
28F008BE/BV-T
28F008BE/BV-B
28F800B5/BV/CE/CV-T
28F800B5/BV/CE/CV-B
28F016SA/SV
28F008SA
28F008S3/S5/SC
28F008S...

Allow specification of an alternate base address with
flashrom -p rayer_spi:iobase=0x278
Any base address is allowed as long as it is nonzero, below 65536 and a
multiple of four.

Read speed is now on par with original spipgm.exe.

Corresponding to flashrom svn r1188.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Martin Rehak <rayer@seznam.cz>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Reported by Konstantin <hc@comp.susu.ac.ru>
lspci (superiotool missing, doesn't matter for this patch)
 http://www.coreboot.org/pipermail/flashrom/2010-September/004609.html


DMI is needed, as there are no usefull PCI IDs.

(no test of that board yet, thus marked as untested)

Corresponding to flashrom svn r1187.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Update README to list all the needed rpm files for DOS cross-compilation
and update the download location of cwsdpmi.

Corresponding to flashrom svn r1186.
Signed-off-by: Idwer Vollering <vidwer+flashrom@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1185.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Iain Paton <selsinork@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This doesn't include changes to the frontend which must be
done separately, so this won't work out of the box.
This code was tested on hardware.

Corresponding to flashrom svn r1184.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1183.
Signed-off-by: Vladimir 'phcoder' Serbinenko <phcoder@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Half a dozen hardcoded strcmp() don't make sense if we need a
chassis-type list anyway once we merge the internal DMI decoder. Provide
and array of the most interesting chassis types and annotate them with
laptop/non-laptop status. Match the dmidecode chassis type against the
strings in the array.

Corresponding to flashrom svn r1182.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Corresponding to flashrom svn r1181.

Change the physmap* behaviour to use (void*)-1 as error code instead
of NULL. That way, 1:1 mapped memory can be supported properly
because (void*)0 is not a magic pointer anymore.
(void*)-1 on the other hand is a rather unlikely memory offset, so that
should be safe.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The variable 'ret' is unused when compiling on big-endian architecture.

This produces an "unused variable" message, which might be treated as error
if -Werror was passed to compiler.

With this patch I was able to compile flashrom cleanly on ppc and ppc64:

http://koji.fedoraproject.org/koji/taskinfo?taskID=2472482
http://koji.fedoraproject.org/koji/taskinfo?taskID=2472484



Corresponding to flashrom svn r1180.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Cross-checked with UniFlash 1.40 source, chip datasheets and
EZoFlash's chip database (http://www.ezoflash.com/chip_database.php).

Datasheets:
http://www.ezoflash.com/datasheets/flash/Alliance/AS29F002.pdf
http://www.alsc.com/pdf/flash.pdf/as29f010.pdf
http://www.alsc.com/pdf/flash.pdf/as29f040.pdf
http://www.alsc.com/pdf/flash.pdf/as29f200.pdf
http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV160.pdf
http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV400.pdf
http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV800.pdf



Corresponding to flashrom svn r1179.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Thanks to Johannes Sjölund for reporting that the Bus Pirate init could
not deal with a Bus Pirate which is already in binary Bitbang mode.

This is caused by a combination of the slowness of the Bus Pirate, the
slowness of USB and a fast serial port flush routine which just flushes
the buffer contents and does not wait until data arrival stops.

Make the Bus Pirate init more robust by running the flush command 10
times with 1.5 ms delay in between.

This code development was sponsored by Mattias Mattsson. Thanks! Tested
a few dozen times, should work reliably.

Corresponding to flashrom svn r1178.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Mattias Mattsson <vitplister@gmail.com>

Match on Memory Controller/LPC Bridge.

lspci/superiotool output:
http://www.coreboot.org/pipermail/flashrom/2010-September/004829.html

Test report:
http://www.coreboot.org/pipermail/flashrom/2010-September/004835.html



Corresponding to flashrom svn r1177.
Tested-by: Andrew Cleveland <evil.saltine@gmail.com>
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Bright BM29F040
Hyundai HY29F040A
Macronix MX29F040

Also add chip IDs for
Bright BM29F400T/B

Datasheets:
http://www.ezoflash.com/datasheets/flash/Winbond/BM29F040.pdf
http://www.ezoflash.com/datasheets/flash/Hyundai/HY29F040A.pdf
http://www.ezoflash.com/datasheets/flash/Macronix/MX29F040.pdf
http://www.ezoflash.com/datasheets/flash/Winbond/BM29F400T_B.pdf

Bright BM29F040 probe/read test report:
http://www.flashrom.org/pipermail/flashrom/2010-September/004805.html



Corresponding to flashrom svn r1176.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Mattias Mattsson <vitplister@gmail.com>

AM_* -> AMD_AM*
AT_* -> ATMEL_AT*
EN_* -> EON_EN*
HY_* -> HYUNDAI_HY*
MBM* -> FUJITSU_MBM*
MX_ID -> MACRONIX_ID
MX_* -> MACRONIX_MX*
PMC_* -> PMC_PM*
SST_* -> SST_SST*

It leaves the Intel #defines alone because there is another pending
patch for that:
http://patchwork.coreboot.org/patch/1937/

Some background discussion here:
http://www.flashrom.org/pipermail/flashrom/2010-July/004059.html



Corresponding to flashrom svn r1175.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

No docs available.

Corresponding to flashrom svn r1174.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

AMD SB700 and later have an integrated microcontroller (IMC) which runs
from shared flash.

The IMC will happily issue reads while we write, issue writes while we
read, and generally cause lots of havoc due to the concurrent accesses
it performs while flashrom is running. A failing or corrupted read can
be detected since r1145, and the worst case is that the read aborts and
the user has to retry. A failing write is much more serious. It can
be detected since r1145, but if the SPI interface locks up, we can't
continue writing nor can we read the current chip contents.

If the IMC is inactive, there is no reason to worry. If the IMC is
active, flashrom will refuse to erase/write the chip with this patch.

The correct fix would be to stop the IMC during flashing, but apparently
the relevant registers are undocumented, so we take the safe route for
now until someone from AMD can give us more info.

Corresponding to flashrom svn r1173.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Matthias Kretz <kretz@kde.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Some flash chips need time to exit ID mode, and while we take care of
correct timing for the matching probe, subsequent probes may have
totally different timing, and that can lead to garbage responses from
the flash chip during the first accesses after the probe sequence is
done.
Delay 100 ms between the last probe and any subsequent operation.
To ensure maximum correctness, we would have to reset the chip first in
case the last probe function left the chip in an undefined (non-read)
state. That will be possible once struct flashchip has a .reset
function.

This fixes unstable erase/read/write for some flahs chips on nic3com and
possible other use cases as well.

Thanks to Maciej Pijanka for reporting the issue and testing patches.

Corresponding to flashrom svn r1172.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

SPI bitbanging on devices which speak SPI natively has a dual-use
problem: We need to shut down normal SPI operations to do the bitbanging
ourselves. Once we're done, it makes a lot of sense to reenable "normal"
SPI operations again. Add request_bus/release_bus functions to struct
bitbang_spi_master.
Add a bitbang shutdown function (not used yet).
Change MCP SPI and Intel NIC SPI to use the new request/release bus
infrastructure.
Cosmetic changes to a few error messages (80 column limit).

There are multiple possible strategies for bus request/release:
- Request at the start of a SPI command, release immediately afterwards.
- Request at the start of a SPI multicommand, release once all commands
of the multicommand are done.
- Request on programmer init, release on shutdown.
Each strategy has its own advantages. For now, we will stay with the
first strategy which worked fine so far.

Corresponding to flashrom svn r1171.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfin...

ICH SPI has the ability to restrict SPI read/write accesses to a given
address range. The low end of the range is configurable by the BIOS (and
by flashrom if the BIOS didn't lock down the flash interface), the high
end of the range is 0xffffff (2^24-1).
This patch checks for an address range restriction and uses the low end
of the allowed range as base for SPI reads. A similar workaround for
REMS/RES opcodes has been committed in r500.

This fixes read on the Intel D945GCLF mainboard where the stock BIOS
enforces a restricted address range.
Please note that writes need the same fix, but for architectural reasons
that fix will be merged once partial write is available.

Corresponding to flashrom svn r1170.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested by David Hendricks on the Intel D945GCLF mainboard, results at
http://paste.flashrom.org/view.php?id=79

Acked-by: David Hendricks <dhendrix@google.com>

Corresponding to flashrom svn r1169.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>