Add board enable for Dell OptiPlex GX1 and mark Intel 28F002BC/BL/BV/BX-T as tested

Match on ethernet and north bridge.

This is tested on an OptiPlex GX1 400L+ but will probably work for
the whole GX1 series as they all share the same vendor BIOS.

lspci/flashrom output
http://www.flashrom.org/pipermail/flashrom/2010-July/004042.html

lspci output (OptiPlex GX1 unknown model)
http://www.coreboot.org/pipermail/coreboot/2010-May/058040.html

superiotool output (OptiPlex GX1 266L+)
http://www.flashrom.org/pipermail/flashrom/2009-July/000207.html

lspci/dmidecode output (OptiPlex GX1 266L+)
http://www.coreboot.org/pipermail/coreboot/2009-July/050958.html



Corresponding to flashrom svn r1191.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

board_enable.c

@@ -1194,6 +1194,15 @@ static int intel_piix4_gpo27_lower(void)
 	return intel_piix4_gpo_set(27, 0);
 }
 
+/*
+ * Suited for:
+ *  - Dell OptiPlex GX1
+ */
+static int intel_piix4_gpo30_lower(void)
+{
+	return intel_piix4_gpo_set(30, 0);
+}
+
 /*
  * Set a GPIO line on a given Intel ICH LPC controller.
  */
@@ -1904,6 +1913,7 @@ const struct board_pciid_enable board_pciid_enables[] = {
 	{0x8086, 0x266a, 0x1043, 0x80a6,  0x8086, 0x2668, 0x1043, 0x813d, NULL,          NULL,         NULL,          "ASUS",        "P5GDC Deluxe",          0,   OK, intel_ich_gpio21_raise},
 	{0x10DE, 0x0030, 0x1043, 0x818a,  0x8086, 0x100E, 0x1043, 0x80EE, NULL,          NULL,         NULL,          "ASUS",        "P5ND2-SLI Deluxe",      0,   OK, nvidia_mcp_gpio10_raise},
 	{0x8086, 0x24dd, 0x1043, 0x80a6,  0x8086, 0x2570, 0x1043, 0x8157, NULL,          NULL,         NULL,          "ASUS",        "P5PE-VM",               0,   OK, intel_ich_gpio21_raise},
+	{0x10b7, 0x9055, 0x1028, 0x0082,  0x8086, 0x7190,      0,      0, NULL,          NULL,         NULL,          "Dell",        "OptiPlex GX1",          0,   OK, intel_piix4_gpo30_lower},
 	{0x8086, 0x3590, 0x1028, 0x016c,  0x1000, 0x0030, 0x1028, 0x016c, NULL,          NULL,         NULL,          "Dell",        "PowerEdge 1850",        0,   OK, intel_ich_gpio23_raise},
 	{0x10de, 0x03ea, 0x1019, 0x2602,  0x10de, 0x03e0, 0x1019, 0x2602, NULL,          NULL,         NULL,          "Elitegroup",  "GeForce6100SM-M",       0,   OK, board_ecs_geforce6100sm_m},
 	{0x1106, 0x3038, 0x1019, 0x0996,  0x1106, 0x3177, 0x1019, 0x0996, NULL,          NULL,         NULL,          "Elitegroup",  "K7VTA3",                256, OK, NULL},

flashchips.c

@@ -3196,7 +3196,7 @@ struct flashchip flashchips[] = {
 		.model_id	= INTEL_28F002T,
 		.total_size	= 256,
 		.page_size	= 256 * 1024,
-		.tested		= TEST_UNTESTED,
+		.tested		= TEST_OK_PREW,
 		.probe		= probe_82802ab,
 		.probe_timing	= TIMING_ZERO, /* Datasheet has no timing info specified */
 		.block_erasers	=

print.c

@@ -390,6 +390,7 @@ const struct board_info boards_known[] = {
 	B("Biostar",	"TA780G M2+",		1, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL),
 	B("Boser",	"HS-6637",		0, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark@zl2tod.net> to flashrom@coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."),
 	B("Congatec",	"conga-X852",		1, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL),
+	B("Dell",	"OptiPlex GX1",		1, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL),
 	B("Dell",	"PowerEdge 1850",	1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL),
 	B("DFI",	"855GME-MGF",		0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?action=e&downloadType=&windowstate=normal&mode=view&downloadFlag=false&itemId=433", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
 	B("DFI",	"Blood-Iron P35 T2RL",	1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?itemId=516&downloadFlag=false&action=1", NULL),