GitLab

DOS with .exe This ensures that any temp files in the configure/check
step of the Makefile are removed correctly.

Corresponding to flashrom svn r1047.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer+flashrom@gmail.com>

That's OK if you know the datasheet well, but for casual readers some
comments are really helpful.

I'm not sure whether we want to disable hardware flash access forever
without enabling it again on shutdown. A few other places made me wonder
as well. I've added FIXME comments in those places.

Corresponding to flashrom svn r1046.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Andrew Morgan <ziltro@ziltro.com>

Checked against datasheets, should work.

Corresponding to flashrom svn r1045.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add NEED_SERIAL and NEED_NET to decouple individual drivers from
compilation and linking decisions. Move libgetopt from a DOS+PCI
dependency to a DOS dependency to fix linking on DOS if no driver
requiring PCI is enabled.

Corresponding to flashrom svn r1044.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

All mentioned north bridges have been checked against data sheet. That's
all north bridges google found a datasheet for with "byte merge" included.

Runs multiple chipset enables if the first one requests further enables to
be run.

VIA byte-merging logic tested: works.
multiple chipset logic: completely untested

Corresponding to flashrom svn r1043.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Fix compiler error (bad forward port in r1040).

Corresponding to flashrom svn r1042.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Test report is
http://www.coreboot.org/pipermail/flashrom/2010-April/002967.html



Corresponding to flashrom svn r1041.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Tested-by: Valentine "Pegasus rider" Yatsenko <mr.qweo@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Reporter/owner of that board: oscar <oshikore@gmail.com>
http://www.coreboot.org/pipermail/flashrom/2010-April/002910.html



Corresponding to flashrom svn r1040.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Some instability remains, but that may be due to hardware problems in
the specific card (Netgear FA311) used for testing.

Corresponding to flashrom svn r1039.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

 - Use [<vendor>:]<board>], not [<vendor>:]<part>], which is more clear.

 - Mention TSOP48 chips in the description.

 - Highlight various additional parts in the manpage which were missing
   so far (i.e., make them bold), including cmdline switches and others.

 - Mention that you can use -VV.

 - Fix name of the now-renamed 'Supported mainboards' section in -L output.

 - Mention that ft2232_spi and buspirate_spi only support SPI chips.

 - Readability and cosmetic improvements, add missing escapes, fix typos.

Corresponding to flashrom svn r1038.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Every board-enable function is passed a 'const char *name' (board name)
which is totally useless as the board name was already printed by flashrom
at that point. Also, 95% or so of the board-enables don't use the
parameter anyway. So, drop it.

Corresponding to flashrom svn r1037.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1036.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The logic was incorrect in one place which had && instead of ||. Move
the board info #define B to the file where it is used.

Corresponding to flashrom svn r1035.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1034.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

NetBSD needs libpciutils (which is called libpci on pretty much every
other platform and lives in the pciutils package) and apparently the
libpciutils on NetBSD needs the NetBSD-native libpci (no equivalent on
other platforms).

Thanks to Jonathan A. Kollasch for reporting.

Corresponding to flashrom svn r1033.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Jonathan A. Kollasch <jakllsch@kollasch.net>

Since we don't support any other compilers right now, enable that
extension unconditionally.

Fix the bugs found by format string checking.

Corresponding to flashrom svn r1032.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

The internal programmer needs correct information about flash_base and
chip window top/bottom alignment on non-x86 before it can be used. Abort
any internal programmer action for now until the code is fixed.

Add the concept of a processor enable for systems where flashing is
impacted by processor settings or processor model.

Corresponding to flashrom svn r1031.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Only print "flashrom" as the program name unconditionally, not the full path
and program name (e.g. "/home/foo/bar/baz/flashrom" or on Windows
"C:\Foo\Bar\Whatever\flashrom.exe"). The path or exact executable name is
not really useful to print here, if you managed to run --help you already
know it, and it just makes the output look ugly.

Also, add a missing newline to make the output look nicer.

Finally, revert the "CONFIG_PRINT_WIKI ?= yes" change which accidentally
slipped into r1029.

Corresponding to flashrom svn r1030.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1029.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Do not trust the OS at all and measure timer precision before
calibrating the delay loop and use that measurement to get reasonable
precision for our own delay code.

Print a measurement for a delay of 4x the OS timer resolution.

Be precise about how bad the deviation was if we had to recalculate.

Tested on Windows XP, 32 bit, built using MinGW by Uwe. Tested on
FreeDOS v1.0 Final, 32bit, built using DJGPP 4.3.2 by Idwer.

Corresponding to flashrom svn r1028.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Idwer Vollering <vidwer+lists.flashrom@gmail.com>

The required "-m" options were not in the wiki output due to a mistake
that I think I introduced recently.

Corresponding to flashrom svn r1027.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1026.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Also modifies nvidia_mcp_gpio_set to cope with multiple MCP55 chips on
the same board, like on the Tyan S2915-E.

Corresponding to flashrom svn r1025.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Adis Salcin <crow@linux.org.ba>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Also, merge the tables in the output, i.e. there's only one table which
contains both known-good and known-bad/untested boards.

Corresponding to flashrom svn r1024.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

CONFIG_FT2232SPI (makefile config option)
FT2232_SPI_SUPPORT (#define)
ft2232spi (programmer name)
ft2232_spi.c (programmer file)

Use CONFIG_* with underscores for makefile config options and #defines
and kill the useless _SUPPORT idiom.
Use lowercase names with underscores for programmer names and programmer
files.

With this, you can run "grep -i ft2232_spi" and find everything related
to the ft2232_spi driver. Same applies to all other programmers.

Corresponding to flashrom svn r1023.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This allows users to run make clean without specifying the target
architecture.

Corresponding to flashrom svn r1022.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.

Replace a few printf with msg_* to eliminate the need for stdio.h.

Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Winbond W39V040FA (reported by Guenter <lists@gknw.net>)
   Read (thus also probe), write (thus also erase), and verify tested.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003078.html



Corresponding to flashrom svn r1020.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Eon EN25F80 (reported by oops66 <oops66@wanadoo.fr>)
   Probe and read tested.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003183.html

 - AMIC A49LF040A (reported by Guenter <lists@gknw.net>)
   Read (thus also probe), write (thus also erase), and verify tested.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003078.html
   Also reported by Robert Grasso <robert.grasso@modulonet.fr>.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003006.html

 - SST SST49LF008A (reported by Marco Giacinti <marcogiacinti@hotmail.it>)
   Erase tested.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003010.html

 - SST SST29EE020A (reported by Anders Jenbo <anders@jenbo.dk>)
   Write (and thus erase) tested.
   http://www.flashrom.org/pipermail/flashrom/2010-April/002961.html

 - SST SST49LF040 (reported by David Westberg <david@uarda.dlinkddns.com>)
   Probe and read tested.
   http://www.flashrom.org/pipermail/flashrom/2010-April/002862.html

 - Winbond W39V080FA (reported by Maciej Żenczykowski <zenczykowski@gmail.com>)
   All operations tested.
   http://www.flashrom.org/pipermail/flashrom/2010-April/002863.html

 - Winbond W29C020C (reported by Urja Rannikko <urjaman@gmail.com>)
   Erase tested.
   http://www.flashrom.org/pipermail/flashrom/2010-April/002847.html

 - PMC Pm39LV010 (reported by Tim Small <tim@seoss.co.uk>)
   Write (and thus also erase) tested.
   http://www.flashrom.org/pipermail/flashrom/2010-March/002711.html



Corresponding to flashrom svn r1019.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1018.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Some chips implement the RES (0xab) opcode, but they use a non-standard
two byte response instead of the usual one byte response. A two-byte
response has the accuracy of REMS and RDID, so don't check for REMS/RDID
availability before running a two-byte RES.

Corresponding to flashrom svn r1017.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

ICH SPI can enforce address restrictions for all accesses which take an
address (well, it could if the chipset implementation was not broken).
Since exploiting the broken implementation is harder than conforming
to the address restrictions wherever possible, conform to the address
restrictions instead. This patch eliminates a lot of transaction errors
people were seeing on chip probe.

Corresponding to flashrom svn r1016.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

At least it's addressed as 'Pro' in the list of boards, which requires
board_enable.

See also:
http://www.flashrom.org/pipermail/flashrom/2009-July/000003.html



Corresponding to flashrom svn r1015.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1014.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)

No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.

Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.

To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no

Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.

DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.

Corresponding to flashrom svn r1013.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>

 - PMC Pm49FL004
 - SST SST49LF020
 - SST SST49LF020A
 - SST SST49LF040B
 - SST SST49LF080A
 - Winbond W39V040B

I tested all operations on hardware using r997. Only on SST49LF040B
write/erase does not seem to work, will investigate later (probe/read
works, though).

Corresponding to flashrom svn r1012.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

 - Add missing entries for 'flashrom -L' output and wiki output.

 - Add missing entries in the manpage.

 - nicrealtek.c: Coding style fixes and cosmetics.

Corresponding to flashrom svn r1011.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1010.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Marc Bertens <mbertens@xs4all.nl>

 - Use '?3' wiki template (light greenish, not gray) for untested stuff.
 
 - Reduce page width a bit to improve readability on smaller screens.
 
 - Generalize some functions a bit (pass in how many columns to generate).
 
 - Mark untested board-enables as such (were incorrectly marked "OK" so far).
 
 - Drop some useless 'valign=top' entries.
 
 - Make a few more functions 'static' while we're at it.

Corresponding to flashrom svn r1009.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Add debug output of the exact matched chipset PCI ID to keep track of
tested PCI IDs for chipsets with one name and multiple IDs. This will
help avoid problems similar to the Tyan S2915 OEM undetected flash in
the future.

Corresponding to flashrom svn r1008.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>