GitLab

Build-tested and 'make PREFIX=/tmp/foo install' tested by me.

Corresponding to flashrom svn r509.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r508.
Signed-off-by: Christian Ruppert <spooky85@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This allows flashrom to identify, read, write, erase and verify flash chips
on (some) 3COM network cards. The patch uses the external programmer
infrastructure, the network card is basically treated as an external
flash programmer.

Usage:

$ ./flashrom -p nic3com
flashrom v0.9.0-r498
Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400
Calibrating delay loop... OK.
Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000.
No operations were specified.

$ ./flashrom -p nic3com -E
flashrom v0.9.0-r498
Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400
Calibrating delay loop... OK.
Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000.
Erasing flash chip... SUCCESS.

$ ./flashrom -p nic3com -wv backup.bin
flashrom v0.9.0-r498
Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400
Calibrating delay loop... OK.
Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000.
Flash image seems to be a legacy BIOS. Disabling checks.
Programming page: 1023 at address: 0x0000ffc0
Verifying flash... VERIFIED.

$ ./flashrom -p nic3com -r backup.bin
flashrom v0.9.0-r498
Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400
Calibrating delay loop... OK.
Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000.
Reading flash... done.

I have tested this on actual hardware (see PCI IDs above) and all
operations worked fine.

Support for other 3COM cards will follow (I added some more which should
be supportable by this code, but they're untested so far), as well as
support for NICs from other vendors.

The patch also adds support for the Atmel AT49BV512 which is soldered
onto the 3COM NIC I used for testing.

Corresponding to flashrom svn r499.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Mateusz Murawski <matowy@tlen.pl>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The write_39sf020() and write_49f002() functions are identical except
for whitespace differences, so drop one of them.

Corresponding to flashrom svn r497.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Usage:
flashrom --programmer dummy

This is a great way to test flashrom without root access.

Corresponding to flashrom svn r483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

- Read/write accesses through function pointers
- Command line parameter for internal/external flasher
- Board and chipset setup moved to internal init function
- Shutdown stuff moved to internal shutdown function

As a side benefit, this will allow us to undo chipset write enable
during shutdown.

Tested by Uwe on real hardware.

Corresponding to flashrom svn r476.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Re-add the svn revision to the version string.

Corresponding to flashrom svn r457.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r454.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r444.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>

The old variant of using &>/dev/null works on bash and zsh, but not on
dash and tcsh. dash and tcsh interpret it as "background command and
truncate /dev/null" which is not what we want. >& works on tcsh and
bash, but it is not POSIX compliant.
Since make uses /bin/sh and /bin/sh has to be POSIX compliant, we can
use the POSIX variant of stderr and stdout redirection.

>/dev/null 2>&1
is POSIX compliant. This is specified in SuSv3, Shell Command Language,
sections 2.7.2 and 2.7.6.

Corresponding to flashrom svn r443 and coreboot v2 svn r4211.
Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>

T/NT TEST_OK_ PROBE READ ERASE WRITE

Test report from Julia. Thanks!

Corresponding to flashrom svn r409 and coreboot v2 svn r3917.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Julia Longtin <juri@solarnetone.org>

Developed and tested to work on Intel D201GLY in July 2008.
Tested by a helpful person on IRC whose name I've since forgotten. Sorry!

Corresponding to flashrom svn r404 and coreboot v2 svn r3910.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ward Vandewege <ward@gnu.org>

Through DirectIO from coresystems GmbH we now support Darwin/Mac OS X.
DirectIO is available at http://www.coresystems.de/en/directio



Corresponding to flashrom svn r399 and coreboot v2 svn r3905.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r398 and coreboot v2 svn r3904.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r397 and coreboot v2 svn r3903.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Shell echo doesn't always know -n.

Corresponding to flashrom svn r392 and coreboot v2 svn r3897.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Fixes #109

Corresponding to flashrom svn r355 and coreboot v2 svn r3790.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This has been tested by Uwe Hermann on an RS690/SB600 board.

Corresponding to flashrom svn r351 and coreboot v2 svn r3779.
Signed-off-by: Jason Wang <Qingpei.Wang@amd.com>
Reviewed-by: Joe Bao <zheng.bao@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Fully tested for Probe/Read/Erase/Write on EN29F002NT.
Jedec subroutines 'probe_jedec()' and 'erase_chip_jedec()'
are still in use, but a tailored 'write_en29f002a()' is
needed due to a byte wise writing mechanism for this chip.

Corresponding to flashrom svn r316 and coreboot v2 svn r3602.
Signed-off-by: Mats Erik Andersson <mats.andersson@gisladisker.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

W39V040C does standard JEDEC commands except chip erase so add a small driver.
probe_w39v040c() prints the block lock pin status when a chip is found.

The Neo2 board enable matches on 8237-internal IDE and onboard NIC PCI IDs.

Many thanks to Daniel McLellan for testing all of this on hardware!
Build tested by Uwe.

Corresponding to flashrom svn r304 and coreboot v2 svn r3431.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r288 and coreboot v2 svn r3404.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

DOC support has been disabled by default for many years. The write function
does nothing but print text. It has a call to write_page_md2802() commented
out, but that function does not exist. This is dead code with ugly #ifdefs.

Updates README to reflect that there was a time when there was code, but it
didn't work. Removes M-Systems #defines and also includes svn rm msys_doc.*

Corresponding to flashrom svn r269 and coreboot v2 svn r3382.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r267 and coreboot v2 svn r3378.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r266 and coreboot v2 svn r3377.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

This patch addresses different argument order of outX() calls,
FreeBSD-specific headers, difference in certain type names and system
interface names, and also FreeBSD-specific way of gaining IO port
access.

Corresponding to flashrom svn r245 and coreboot v2 svn r3344.
Signed-off-by: Andriy Gapon <avg@icyb.net.ua>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The PMC chips understand both LPC and FWH flash commands. When in FWH mode
(MSR_DIVIL_BALL_OPT(0x51400015) = 0x00000f7d on 5536 boards) the Block
Locking Registers by default lock the flash chip for write and erase - in
addition to any chipset write protection.

This patch adds unlock operations before Pm49FL004/2 write and erase, and
it includes an svn mv pm49fl004.c pm49fl00x.c

Thanks go to Nikolay for this patch.

Corresponding to flashrom svn r243 and coreboot v2 svn r3332.
Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Bari Ari <bari@onelabs.com>

This is done by using the generic SPI interface.

Corresponding to flashrom svn r239 and coreboot v2 svn r3325.
Signed-off-by: Dominik Geyer <dominik.geyer@kontron.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

No behavioural changes, but greatly improved SPI abstraction.

Corresponding to flashrom svn r229 and coreboot v2 svn r3305.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

The generic jedec.c does not work for the ST M50FLW flash devices,
because they need an unlock command first. For this reason, ST M50FLW
support is moved to a new HW support module, because any change in
jedec.c would bear the risk to cause problems with the already supported
devices.

It's already tested with ST M50FLW080A; the other chips of this family i
dont have available, so i couldnt test it.

Corresponding to flashrom svn r219 and coreboot v2 svn r3274.
Signed-off-by: Claus Gindhart <claus.gindhart@kontron.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Support for flashing on the Kontron 986LCD-M board.

Corresponding to flashrom svn r213 and coreboot v2 svn r3165.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r206 and coreboot v2 svn r3142.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r201 and coreboot v2 svn r3137.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

With this small change it is possible to build flashrom again when
specifying custom CFLAGS/LDFLAGS from the make command line like.

  make CFLAGS="..." LDFLAGS="..."

I need to do this when building flashrom in a cross compiler environment
like buildroot for a foreign target.

Corresponding to flashrom svn r196 and coreboot v2 svn r3102.
Signed-off-by: Clark Rawlins <clark@bit63.org>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Because 'v' and 'V' are already in use, the patch uses 'R' (for release)
and, of course, '--version'.

Corresponding to flashrom svn r182 and coreboot v2 svn r3067.
Signed-off-by: Bernhard Walle <bernhard.walle@gmx.de>
Acked-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r179 and coreboot v2 svn r3058.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

 - Install binary in /usr/sbin (not /usr/bin), as it's a root-only tool.

 - Rename manpage from flashrom.1 to flashrom.8, as section 8 contains
   "System administration commands (usually only for root)".

 - Actually install the manpage upon 'make install'.

Corresponding to flashrom svn r149 and coreboot v2 svn r2866.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

The SPI chip finding and SPI chip accessor code is moved as well. This
can be split later if we feel like it.

The non-use of svn cp is intentional because the only history we'd
have to preserve are a few commits which were early prototypes of chip
identification code. For those who intend to look at that history, they
can look at board_enable.c revision 2853.

Corresponding to flashrom svn r145 and coreboot v2 svn r2857.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r133 and coreboot v2 svn r2753.
Signed-off-by: Markus Boas <ryven@ryven.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The tool is called 'flashrom' after all.

Corresponding to flashrom svn r103 and coreboot v2 svn r2603.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

This splits up the ROM Write enable code into chipset specific and
board specific parts. This of course means that a lot of code is
plainly moved about.

* Allows for linuxbios name matching and pci-subsystem id matching.
  The latter uses a double set to properly distuinguish boards despite
  of some known vendors being lax about it.
* Fixes GPIO15 being raised on every VT8235 southbridge, regardless of what
  that line actually controls; rom on EPIA-M, backlight on mitac 8999 laptop.
* Adds flashrom support for Asus A7V400-MX (KM400 + VT8235)
* Island aruma was renamed agami aruma, the board specific code now got
  adjusted. A set of pci-ids was retrieved from source code.

Corresponding to flashrom svn r99 and coreboot v2 svn r2581.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Stefan Reinauer <stepan@coresystems.de>