GitLab

Corresponding to flashrom svn r1698.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Improve compilation with libpayload (compiling flashrom.c and
linking is still broken):
 - disable Ponyprog (which enforced serial.c compilation)
 - make errno available where it is needed

Fix internal.c for non-x86 and enable cb parsing on ARM.

Fix mingw builds by using its __USE_MINGW_ANSI_STDIO macro
and gnu_printf definition for printf format style checking.
See http://sourceforge.net/apps/trac/mingw-w64/wiki/gnu%20printf


This requires inclusion of stdio.h in flash.h.

Fix order of libraries in the Makefile:
FEATURE_LIBS needs to come *after* PCILIBS in case ZLIB is needed by it.

Corresponding to flashrom svn r1697.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Previously the default implementation was used, which always failed.
On other systems than the Geode the code is not equal to that anymore,
but should not explode because setup_cpu_msr() returns an error and
therefore no other MSR functions should be called.

Corresponding to flashrom svn r1696.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by Leonardo Guardati <leonardo@guardati.it>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

I completely forgot about NetBSD in r1638 which was broken since then.
Also, on OpenBSD use iopl again and refine the warning in case we have
insufficient privileges.
Thanks to Jonathan A. Kollasch for his help in getting the details right.

Corresponding to flashrom svn r1695.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Flash chips, links to footnotes.

 - Escape mainboard notes in the wiki output with <nowiki> (this became
necessary because MediaWiki started to convert <mark@zl2tod.net> to
<mark>). - Add explanations at the top of the flash chip table in the
wiki. - Add links to the footnotes of mainboards and laptops similarly
to what MediaWiki does: link from the reference to the footnote and
vice versa too. Also, check for truncations of the footnotes due to the
limited buffer. - Fix a typo introduced in r1555.

Corresponding to flashrom svn r1694.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add...
 - N25Q128..3E
 - N25Q128..1E
 - N25Q256..1E (defunct due to addressing)
 - N25Q256..3E (defunct due to addressing)
 - N25Q512..1E (defunct due to addressing)
 - N25Q512..3E (defunct due to addressing)
 - N25Q00A..3G (defunct due to addressing)

Also, refine existing family members.

Corresponding to flashrom svn r1693.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add...
 - S25FL128S
 - S25FL256S uniform version (defunct due to addressing)
 - S25FL512S uniform version (defunct due to addressing)

Merge Intel S33 status register functions with this one's.

Corresponding to flashrom svn r1692.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add...
 - S25FL204K
 - S25FL208K
 - S25FL216K (same ID as S25FL116K)

Corresponding to flashrom svn r1691.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, refine status register prettyprinting and unlocking of all family
members and add OTP details.

Corresponding to flashrom svn r1690.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, refine unlocking of A25L032, A25LQ32A and A25LQ032.

Corresponding to flashrom svn r1689.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add...
 - EN25QH64
 - EN25QH128
 - EN25QH256 (defunct due to addressing)

Corresponding to flashrom svn r1688.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add...
 - EN25S10
 - EN25S20
 - EN25S40
 - EN25S80
 - EN25S16
 - EN25S32
 - EN25S64

Corresponding to flashrom svn r1687.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add...
 - M45PE10
 - M45PE20
 - M45PE40
 - M45PE80
 - M45PE16

Corresponding to flashrom svn r1686.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add...
 - GigaDevice GD25T80
 - GigaDevice GD25Q10
 - GigaDevice GD25Q512

Also, improve some others.

Corresponding to flashrom svn r1685.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add...
 - Sanyo LE25FW403A
 - Sanyo LE25FW418A
 - Sanyo LE25FW806
 - Sanyo LE25FW808

Also, fix wrong description of Sanyo LE25FW203A.

Corresponding to flashrom svn r1684.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add...
 - N25S10
 - N25S20
 - N25S40
 - N25S80
 - N25S16

Corresponding to flashrom svn r1683.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Used for page erase on some chips (e.g. Numonyx M45PE and
Sanyo LF25FW series).

Corresponding to flashrom svn r1682.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

 - spi_prettyprint_status_register_default_welwip():
   It just prettyprints the plain hex value and the welwip bits.
 - spi_prettyprint_status_register_default_bp4():
   Prints the hex value, welwip, bp0-5 and srwd bits.
 - spi_disable_blockprotect_bp2_srwd(),
 - spi_disable_blockprotect_bp3_srwd() and
   spi_disable_blockprotect_bp4_srwd():
   Three new common block unprotection functions for the frequent
   cases where there is a status register lock bit at bit #7 and some
   block protection bits at bits #2-#4, #2-#5 and #2-#6 respectively.

Corresponding to flashrom svn r1681.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Quick hack to print a warning if we skip all blocks in a write
process because they are already equal to the requested image. We
want something like this to make users aware... and some developers
who regularly fall for this too *coughcough*. There might be more
elegant solutions for this... patches welcome.

This does not work for erasing because we do that unconditionally.

Corresponding to flashrom svn r1680.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

I broke unlocking them correctly in r1635 while refactoring (NB: the
commit log including the overly selfconfident statement about the
"bug in spi_disable_blockprotect_at25df()").

Affected chips have per sector protection bits and the write protection bits
in the status register do indicate if none, some or all sectors are protected.
It is possible to globally (un)lock all sectors at once but in a way that was
not anticipated when refactoring the spi25 unlocking functions into
spi_disable_blockprotect_generic(). To globally unprotect not only the
protection bits (2 and 3) have 0 to be written to them but also bits 4 and 5
which normally would not be touched by spi_disable_blockprotect_generic().
Some of the chips also support a permanent lockdown with fuses which we
do not handle yet.

To fix this without copying the whole method I introduce another mask
parameter to spi_disable_blockprotect_generic() namely unprotect_mask.
See verbose comments inline for details.

Also, prettyprint the status register after trying to disable the block
protection fails.

Corresponding to flashrom svn r1679.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Chi Zhang <zhangchi866@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Newer models support a 66 MHz clock and fast reads.
We should probably distinguish the models better (as we do in ichspi)
and add support for frequency selection etc. For now this has to
suffice.

Corresponding to flashrom svn r1678.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

 - Use ".V" (and "_V" in macros) for 3.3V Winbond 25Q chips.
   Rename the existing chips and add a .voltage entry where it was missing.
 - Use ".W" (and "_W" in macros) for 1.8V Winbond 25Q chips.
 - Add W25Q20.W, W25Q40.W, W25Q80.W, W25Q16.W, W25Q32.W, W25Q64.W.
 Based on chromiumos' 469707f0d9b7d81b6c6bb2cace13f09db70f4382
 http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commitdiff;h=469707f0d9b7d81b6c6bb2cace13f09db70f4382



Corresponding to flashrom svn r1677.
Signed-off-by: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

There is no good reason to collect further log files of locked Intel-
based boards. Forward affected users directly to an explanation in
the wiki instead.

Corresponding to flashrom svn r1675.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Avoid setting SPI speed on firmware versions < 5.0.0 and note this
limitation in the man page.
Use the correct offset of the "12M" element in the spispeeds array to
match our manpage and the default of Dediprog's dpcmd.

Corresponding to flashrom svn r1674.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Thanks to the traces captured and tests done by Martin Roth, and confirmed
by tests and analysis by Joshua Zarr too, we can now use both target chips
on the Dediprog SF100.

Corresponding to flashrom svn r1673.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

We forgot to add a few SPI erase functions to the helper function that is
used for SFDP. Also, sort the declarations in the header.

Corresponding to flashrom svn r1672.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This patch adds support for
 - Pm25LD256C
 - Pm25LD512(C)
 - Pm25LD010(C)
 - Pm25LD020(C)
 - Pm25LD040(C)

These seem to be the successors of the Pm25LV series.
The main difference seems to be the dual I/O and additional erase opcodes.
Some support an additional, complex locking register (maybe all of the
above, but available datahsheets do not indicate it for all).

The Pm25LD512C was tested by Chi Zhang:
http://paste.flashrom.org/view.php?id=1579



Corresponding to flashrom svn r1671.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

 - Add missing bits and resort chips
 - Refine Pm25LV512(A) and Pm25LV010
   Due to manufacturer ID continuation this one needs a new probing
   function: probe_spi_res3() which should be refactored in the future.
   The datasheet describes a very weird order of ID bytes:
   Vendor byte, model byte, vendor continuation byte. Let's pretend we did
   not read that or the datasheet is bogus (although the datasheet of the
   successor series describes the same but luckily additionally to RDID).
 - Add Pm25LV010A
   This was tested by Chi Zhang:
   http://paste.flashrom.org/view.php?id=1573



Corresponding to flashrom svn r1670.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1669.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

It prints to stderr and that's not what we want necesserily;
using msg_*err gives us more control.

Corresponding to flashrom svn r1668.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Handle long sleeps on non-Windows correctly.

Corresponding to flashrom svn r1667.
Signed-off-by: Maksim Kuleshov <mmcx@mail.ru>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This adds a number of new granularitie and refines the handling of
n-byte granularities by extracting the respective code into a helper
function which reduces the pain of the above significantly.

Corresponding to flashrom svn r1666.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Sockets are not ported (yet).

Tested on Windows 7 with my Atmega32U2 serprog implementation.
http://paste.flashrom.org/view.php?id=1566



Corresponding to flashrom svn r1665.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Check more return codes and close the file handle in case of errors in
sp_openserport().

Corresponding to flashrom svn r1664.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Read(), write(), usleep() are replaced.

Corresponding to flashrom svn r1663.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

It seems useful to have a generic and platform-independent method to
read and write to a serial port without blocking. This is the write part.

This allows to get rid of the explicit temporary disabling of blocking I/O in
serprog's sp_synchronize().

Corresponding to flashrom svn r1662.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

It seems useful to have a generic and platform-independent method to
read and write to a serial port without blocking. This is the read part.

It stores the current blocking properties before disabling blocking and
restores them after reading. The timeout is implemented as previously
by retrying every millisecond until the timeout is reached or enough
characters are available.

Corresponding to flashrom svn r1661.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

MSDN says: "The baud rate at which the communications device
operates. This member can be an actual baud rate value, or one of
the following indexes." But it is not specified what happens for
different values, so we round down to valid ones (or to the minimum
of 9600) by reusing the existing struct baudentry sp_baudtable[] and
the new function round_baud().

Do similarly on non-Windows where arbitrary values are not allowed
anyway.

Corresponding to flashrom svn r1660.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Windows is awkward. The win32 API does not support errno/strerror as one
might expect. Introduce a new msg_* function that alleviates the pain a bit
(my head still hurts very badly).

Corresponding to flashrom svn r1659.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Adds support for the Altera USB-Blaster programming dongle in Active
Serial (AS) mode. Tested on both original product and a clone dongle.

Corresponding to flashrom svn r1658.
Signed-off-by: James Laird <jhl@mafipulation.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>