Add support for Spansion S25FL2 chips

Add...
 - S25FL204K
 - S25FL208K
 - S25FL216K (same ID as S25FL116K)

Corresponding to flashrom svn r1691.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

flashchips.c

@@ -8483,6 +8483,109 @@ const struct flashchip flashchips[] = {
 		.voltage	= {2700, 3600},
 	},
 
+	{
+		.vendor		= "Spansion",
+		.name		= "S25FL204K",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= SPANSION_ID,
+		.model_id	= SPANSION_S25FL204,
+		.total_size	= 512,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	= {
+			{
+				.eraseblocks = { {4 * 1024, 128} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {64 * 1024, 8} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { { 512 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { { 512 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_default_bp3,
+		.unlock		= spi_disable_blockprotect_bp3_srwd,  /* #WP pin write-protects SRWP bit. */
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read, /* Fast read (0x0B), dual I/O  (0x3B) supported */
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "Spansion",
+		.name		= "S25FL208K",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= SPANSION_ID,
+		.model_id	= SPANSION_S25FL208,
+		.total_size	= 1024,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	= {
+			{
+				.eraseblocks = { {4 * 1024, 256} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {64 * 1024, 16} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { { 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { { 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_default_bp3,
+		.unlock		= spi_disable_blockprotect_bp3_srwd,  /* #WP pin write-protects SRWP bit. */
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read, /* Fast read (0x0B), dual I/O  (0x3B) supported */
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "Spansion",
+		.name		= "S25FL116K/S25FL216K",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= SPANSION_ID,
+		.model_id	= SPANSION_S25FL216,
+		.total_size	= 2048,
+		.page_size	= 256,
+		/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	= {
+			{
+				.eraseblocks = { {4 * 1024, 512} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {64 * 1024, 32} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { { 2048 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { { 2048 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_default_bp3,
+		.unlock		= spi_disable_blockprotect_bp3_srwd,  /* #WP pin write-protects SRWP bit. */
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read, /* Fast read (0x0B), dual I/O  (0x3B) supported */
+		.voltage	= {2700, 3600},
+	},
+
 	{
 		.vendor		= "SST",
 		.name		= "SST25LF040A",

flashchips.h

@@ -540,7 +540,9 @@
 #define SPANSION_S25FL016A	0x0214
 #define SPANSION_S25FL032A	0x0215	/* Same as S25FL032P, but the latter supports EDI and CFI */
 #define SPANSION_S25FL064A	0x0216	/* Same as S25FL064P, but the latter supports EDI and CFI */
-
+#define SPANSION_S25FL204	0x4013
+#define SPANSION_S25FL208	0x4014
+#define SPANSION_S25FL216	0x4015	/* Same as S25FL216K, but the latter supports OTP, 3 status regs, quad I/O, SFDP etc. */
 /*
  * SST25 chips are SPI, first byte of device ID is memory type, second
  * byte of device ID is related to log(bitsize) at least for some chips.