GitLab

The internal programmer needs correct information about flash_base and
chip window top/bottom alignment on non-x86 before it can be used. Abort
any internal programmer action for now until the code is fixed.

Add the concept of a processor enable for systems where flashing is
impacted by processor settings or processor model.

Corresponding to flashrom svn r1031.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Only print "flashrom" as the program name unconditionally, not the full path
and program name (e.g. "/home/foo/bar/baz/flashrom" or on Windows
"C:\Foo\Bar\Whatever\flashrom.exe"). The path or exact executable name is
not really useful to print here, if you managed to run --help you already
know it, and it just makes the output look ugly.

Also, add a missing newline to make the output look nicer.

Finally, revert the "CONFIG_PRINT_WIKI ?= yes" change which accidentally
slipped into r1029.

Corresponding to flashrom svn r1030.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1029.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Do not trust the OS at all and measure timer precision before
calibrating the delay loop and use that measurement to get reasonable
precision for our own delay code.

Print a measurement for a delay of 4x the OS timer resolution.

Be precise about how bad the deviation was if we had to recalculate.

Tested on Windows XP, 32 bit, built using MinGW by Uwe. Tested on
FreeDOS v1.0 Final, 32bit, built using DJGPP 4.3.2 by Idwer.

Corresponding to flashrom svn r1028.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Idwer Vollering <vidwer+lists.flashrom@gmail.com>

The required "-m" options were not in the wiki output due to a mistake
that I think I introduced recently.

Corresponding to flashrom svn r1027.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1026.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Also modifies nvidia_mcp_gpio_set to cope with multiple MCP55 chips on
the same board, like on the Tyan S2915-E.

Corresponding to flashrom svn r1025.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Adis Salcin <crow@linux.org.ba>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Also, merge the tables in the output, i.e. there's only one table which
contains both known-good and known-bad/untested boards.

Corresponding to flashrom svn r1024.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

CONFIG_FT2232SPI (makefile config option)
FT2232_SPI_SUPPORT (#define)
ft2232spi (programmer name)
ft2232_spi.c (programmer file)

Use CONFIG_* with underscores for makefile config options and #defines
and kill the useless _SUPPORT idiom.
Use lowercase names with underscores for programmer names and programmer
files.

With this, you can run "grep -i ft2232_spi" and find everything related
to the ft2232_spi driver. Same applies to all other programmers.

Corresponding to flashrom svn r1023.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This allows users to run make clean without specifying the target
architecture.

Corresponding to flashrom svn r1022.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.

Replace a few printf with msg_* to eliminate the need for stdio.h.

Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Winbond W39V040FA (reported by Guenter <lists@gknw.net>)
   Read (thus also probe), write (thus also erase), and verify tested.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003078.html



Corresponding to flashrom svn r1020.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Eon EN25F80 (reported by oops66 <oops66@wanadoo.fr>)
   Probe and read tested.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003183.html

 - AMIC A49LF040A (reported by Guenter <lists@gknw.net>)
   Read (thus also probe), write (thus also erase), and verify tested.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003078.html
   Also reported by Robert Grasso <robert.grasso@modulonet.fr>.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003006.html

 - SST SST49LF008A (reported by Marco Giacinti <marcogiacinti@hotmail.it>)
   Erase tested.
   http://www.flashrom.org/pipermail/flashrom/2010-May/003010.html

 - SST SST29EE020A (reported by Anders Jenbo <anders@jenbo.dk>)
   Write (and thus erase) tested.
   http://www.flashrom.org/pipermail/flashrom/2010-April/002961.html

 - SST SST49LF040 (reported by David Westberg <david@uarda.dlinkddns.com>)
   Probe and read tested.
   http://www.flashrom.org/pipermail/flashrom/2010-April/002862.html

 - Winbond W39V080FA (reported by Maciej Żenczykowski <zenczykowski@gmail.com>)
   All operations tested.
   http://www.flashrom.org/pipermail/flashrom/2010-April/002863.html

 - Winbond W29C020C (reported by Urja Rannikko <urjaman@gmail.com>)
   Erase tested.
   http://www.flashrom.org/pipermail/flashrom/2010-April/002847.html

 - PMC Pm39LV010 (reported by Tim Small <tim@seoss.co.uk>)
   Write (and thus also erase) tested.
   http://www.flashrom.org/pipermail/flashrom/2010-March/002711.html



Corresponding to flashrom svn r1019.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1018.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Some chips implement the RES (0xab) opcode, but they use a non-standard
two byte response instead of the usual one byte response. A two-byte
response has the accuracy of REMS and RDID, so don't check for REMS/RDID
availability before running a two-byte RES.

Corresponding to flashrom svn r1017.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

ICH SPI can enforce address restrictions for all accesses which take an
address (well, it could if the chipset implementation was not broken).
Since exploiting the broken implementation is harder than conforming
to the address restrictions wherever possible, conform to the address
restrictions instead. This patch eliminates a lot of transaction errors
people were seeing on chip probe.

Corresponding to flashrom svn r1016.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

At least it's addressed as 'Pro' in the list of boards, which requires
board_enable.

See also:
http://www.flashrom.org/pipermail/flashrom/2009-July/000003.html



Corresponding to flashrom svn r1015.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1014.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)

No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.

Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.

To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no

Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.

DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.

Corresponding to flashrom svn r1013.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>

 - PMC Pm49FL004
 - SST SST49LF020
 - SST SST49LF020A
 - SST SST49LF040B
 - SST SST49LF080A
 - Winbond W39V040B

I tested all operations on hardware using r997. Only on SST49LF040B
write/erase does not seem to work, will investigate later (probe/read
works, though).

Corresponding to flashrom svn r1012.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

 - Add missing entries for 'flashrom -L' output and wiki output.

 - Add missing entries in the manpage.

 - nicrealtek.c: Coding style fixes and cosmetics.

Corresponding to flashrom svn r1011.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1010.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Marc Bertens <mbertens@xs4all.nl>

 - Use '?3' wiki template (light greenish, not gray) for untested stuff.
 
 - Reduce page width a bit to improve readability on smaller screens.
 
 - Generalize some functions a bit (pass in how many columns to generate).
 
 - Mark untested board-enables as such (were incorrectly marked "OK" so far).
 
 - Drop some useless 'valign=top' entries.
 
 - Make a few more functions 'static' while we're at it.

Corresponding to flashrom svn r1009.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Add debug output of the exact matched chipset PCI ID to keep track of
tested PCI IDs for chipsets with one name and multiple IDs. This will
help avoid problems similar to the Tyan S2915 OEM undetected flash in
the future.

Corresponding to flashrom svn r1008.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Fix Tyan S2915 OEM board by commenting out MCP55 LPC bridge PCI ID
10de:0361 which is the secondary LPC bridge.

The same effect could be achieved by refusing to run enable_flash_mcp55
if the device class is not ISA bridge [0601].

Thanks to Alessandro Polverini, Joel Robertson, Nicolas Aveline, Phil
LoCascio and Nils-Helge Garli Hegvik for testing flashrom on hardware
and Michael Karcher for analyzing the factory BIOS for clues. In the
end, no board enable was needed and it was a pure chipset issue.

Corresponding to flashrom svn r1007.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

The programmer init may need a good host delay function.

Corresponding to flashrom svn r1006.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Every SPI programmer driver had its own completely different chip write
implementation, and all of them were insufficiently commented. Create
spi_write_chunked as a copy of spi_read_chunked and convert all SPI
programmers to use it. No functional changes except: - Bus Pirate uses
12 Byte writes instead of 8 Byte writes - SB600 uses 5 Byte writes
instead of 1 Byte writes

Corresponding to flashrom svn r1005.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: David Hendricks <dhendrix@google.com>

Read class info manually and store it in a separate variable.

Corresponding to flashrom svn r1004.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Support for Realtek RTL8139 network card flashing.

Corresponding to flashrom svn r1003.
Signed-off-by: Joerg Fischer <turboj@gmx.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1002.
Signed-off-by: Joerg Fischer <turboj@gmx.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1000.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Msr_t memory layout may depend on compiler; with optimizations this may
lead to writing incorrect data to MSR. Create a temporary buffer with
correct layout to avoid this problem.

Corresponding to flashrom svn r999.
Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Change the command line interface to make file names positional.
Add more sanity checks to the command line parser.

Corresponding to flashrom svn r998.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel.

Corresponding to flashrom svn r997.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

- Force chip read by faking probe success.
- Force chip access even if the chip is bigger than max decode size for
  the flash bus.
- Force erase even if erase is known bad.
- Force write even if write is known bad.
- Force writing even if cbtable tells us that this is the wrong image
  for this board.

This patch cleans up --force usage:
- Remove any suggestions to use --force for probe/read from flashrom
  output.
- Don't talk about "success" or "Found chip" if the chip is forced.
- Add a new internal programmer parameter boardmismatch=force. This
  overrides any mismatch detection from cbtable/image comparisons.
- Add a new internal programmer parameter laptop=force_I_want_a_brick.
- Adjust the documentation for --force.
- Clean up the man page a bit whereever it talks about --force or
  laptops.

Additional changes in this patch:
- Add warnings about laptops to the documentation.
- Abort if a laptop is detected. Can be overridden with the programmer
parameter mentioned above.
- Add "Portable" to the list of DMI strings indicating laptops.
- Check if a chip specified with -c is known to flashrom.
- Programmer parameter reliability and consistency fixes.
- More paranoid self-checks.
- Improve documentation.

Corresponding to flashrom svn r996.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Now the DS selector limit is set to 4GB and all mmio accesses goes
through DS, the 1:1 mapping is fixed so the _DS base is taken onto
account. Plus is that the hwaccess.c needs no change and memcpy etc can
be used on mmaped space.

Corresponding to flashrom svn r995.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

I tested read/write/probe with W25Q80.

Corresponding to flashrom svn r994.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 
Acked-by: David Hendricks <dhendrix@google.com>

Corresponding to flashrom svn r993.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Tom Brand <worntreads@sbcglobal.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Fix an unescaped % in a format specifier.

Corresponding to flashrom svn r992.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Remove blockwise write for i82802ab chips. It will be reintroduced
in post-0.9.2 in a generic way. This is needed to fix
FWH-like chips with non-uniform sectors.

These are:
  Intel 28F001
  Sharp LHF00L04
  ST M50FW002
  ST M50LPW116

Corresponding to flashrom svn r991.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>