GitLab

Flashbase is a variable which should never be set outside chipset code.
It is only used to calculate the base address of the flash space at
exactly one location in the code.

Setting flashbase during probe caused subsequent probes to fail unless
special handling code was used. We had such code and it caused every
probe except the first to fail on Elan SC520.

Remove the superfluous flashbase assignment and simplify the rest of the
code.

Corresponding to flashrom svn r488.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>

Since many commands take around 10 microseconds to complete, it is
totally pointless to wait for 1000 microseconds before checking the
status again.

This patch is tested and reduced write time on ICH7 with SST25VF080B
from over one hour to 62 seconds.

Thanks to Ali Nadalizadeh for testing!

Corresponding to flashrom svn r487.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>

Change the flashchips entry for SST SST25VF080B to 1-byte writing.

Tested-by: Ali Nadalizadeh.

Corresponding to flashrom svn r486.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Change SPI architecture to handle 1-byte chunk chip writing differently
from 256-byte chunk chip writing.

Annotate SPI chip write functions with _256 or _1 suffix denoting the
number of bytes they write at maximum.

The 1-byte chunk writing is cut-n-pasted to different SPI drivers right
now. A later patch can move them to the generic spi_chip_write_1.

Corresponding to flashrom svn r485.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Until the ICH SPI driver can handle preopcodes as standalone opcodes,
we should handle such special opcode failure gracefully on ICH and
compatible chipsets.

This fixes chip erase on almost all ICH+VIA SPI masters.

Thanks to Ali Nadalizadeh for helping track down this bug!

Corresponding to flashrom svn r484.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Usage:
flashrom --programmer dummy

This is a great way to test flashrom without root access.

Corresponding to flashrom svn r483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This will allow generation of supported boards for wiki output to be
split to distinct columns.

Corresponding to flashrom svn r482.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r481.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r477.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

- Read/write accesses through function pointers
- Command line parameter for internal/external flasher
- Board and chipset setup moved to internal init function
- Shutdown stuff moved to internal shutdown function

As a side benefit, this will allow us to undo chipset write enable
during shutdown.

Tested by Uwe on real hardware.

Corresponding to flashrom svn r476.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r475.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This is (among other things) useful/required for the -L output and the
upcoming wiki-syntax output of supported boards.

Corresponding to flashrom svn r474.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Flashrom assumes that the flash chip contents are available via mmap if
no read function is defined.

This special case is handled in lots of places all over the code.

Remove the special case and use the read_memmapped function. Not only
does this allow us to fix a read bug in flashrom I recently uncovered on
ICH SPI, it also allows us to add support for Paraflasher to flashrom.

Corresponding to flashrom svn r473.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The list of tested chipsets is synced from the wiki.

Also, split the chipset vendor and name into two fields for easier
wiki-syntax output later.

Corresponding to flashrom svn r472.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Suggested by Peter Stuge.

Corresponding to flashrom svn r471.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

ASD chips may exist, but all available docs suggest they are just
rebranded Winbond chips with Winbond IDs. The ASD vendor/chip IDs in
flash.h are very likely just misinterpreted LHA headers.

Corresponding to flashrom svn r470.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r469.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

- Using a 4-bit index into an array with 8 elements leads to
out-of-bounds accesses. Use proper bit masking to fix this.
- Factor out common SST25 status register printing.
- Use the common SST25 status register printing for SST25VF080B.

Corresponding to flashrom svn r468.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

If unprotect succeeded, it will print "SB600 unprotect failed".

Corresponding to flashrom svn r467.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r466.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r465.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Use pci_dev_find() instead of setting up a filter and iterating over PCI
devices.

Corresponding to flashrom svn r464.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

- Check for read/write protected regions first.
- Region protection is write-once according to the data sheets. Check if
the write succeeded. Don't write if the region is not protected.
- Verbose region protection dumping.
- Improve readability of BAR mapping code.
- Align BAR mapping to a page boundary (4k) instead of a 16k boundary.

This patch prepares the code for a SPI detection heuristic.

Corresponding to flashrom svn r463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

Open fails so there is no reason to lseek in. Actually this is a trivial
fix for a bad return value from open.

Corresponding to flashrom svn r462.
Signed-off-by: Bertrand Jacquin <beber@meleeweb.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>

As reported by A. Spamlover. Thanks!

Corresponding to flashrom svn r461.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Also, move more stuff to the manpage where it belongs (this also
eliminates some duplicated contents).

Corresponding to flashrom svn r460.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Only access LPC ROM if we boot via LPC ROM. Only access SPI ROM if we
boot via SPI ROM.
The code to force enable SPI is commented out in case someone wants to
reenable it for a particular board with LPC and SPI flash.

Corresponding to flashrom svn r459.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Per report from from Henning Fleddermann. Thanks!

Corresponding to flashrom svn r458.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Re-add the svn revision to the version string.

Corresponding to flashrom svn r457.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r454.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r453.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>

Fix compilation on Solaris and tell people how to compile flashrom on
Solaris, Darwin/Mac OS X and DragonFly BSD.

Thanks to Joerg Schilling and Patrick Georgi for the Solaris part.

Corresponding to flashrom svn r452.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r451.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r450.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Make that explicit in the associated prototypes. This avoids a warning
on some compilers and is a correctness issue.

Corresponding to flashrom svn r449.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

He started flashrom back in 2000.

Thanks to Ron for pointing this out.

Corresponding to flashrom svn r448.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

(all-caps or no-caps for short options, exclude range syntax, etc.) we
should tell users in the man page and the usage message about this.

Corresponding to flashrom svn r447.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Per report from Aldrik Dunbar. Thanks!

Corresponding to flashrom svn r446.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

There are still some tweaks necessary to get flashrom to build on
DragonFly, but this helps a lot.

Corresponding to flashrom svn r445.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r444.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>