GitLab

Even a failing chipset init (maybe due to unknown chipset) could still
get us reasonable probe results or at least forced reads.

Corresponding to flashrom svn r708.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This is a followup to r705.

Corresponding to flashrom svn r707.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>

Corresponding to flashrom svn r706.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>

Raises GP32 on IT8712F, and comes with a more general routine to set
io lines on the IT8712F.

Corresponding to flashrom svn r705.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Udu Ogah <putlinuxonit@gmail.com>

With this patch, make tarball and make export still work as expected,
but if you specify RELEASENAME=foo, then the directories and tarballs
are named flashrom-foo instead of flashrom-0.9.0-r703. This makes
release creation a lot easier. As an example, look at creating the 0.9.1
tarball: # make tarball RELEASENAME=0.9.1

Corresponding to flashrom svn r704.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Update bad board list and remove boards where either the chipset is
not supported (not a board issue) or where we have no report in the
archives.

Corresponding to flashrom svn r703.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Marked as OK:

 - ASUS A8V Deluxe (reported by Joachim Ernst <Joachim.Ernst@web.de>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000448.html
   Tested with r701.

 - ASUS P5L-MX (reported by Vasiliy Vylegzhanin <6vasia@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000446.html
   Tested with v0.9.0.

 - Abit Fatal1ty F-I90HD (reported by Joachim Ernst <joachim.ernst@web.de>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000435.html

 - Trigem Lomita (reported by Udu Ogah <putlinuxonit@gmail.com>)
   Tested with r695.

 - GIGABYTE GA-MA790GP-DS4H (reported by Ralph Loader <suckfish@ihug.co.nz>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000414.html
   http://www.flashrom.org/pipermail/flashrom/2009-August/000417.html

 - GIGABYTE GA-MA78GPM-DS2H (reported by
                             Erik Haugen Bakke <erik_hb_mlist@yahoo.com.au>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000329.html



Corresponding to flashrom svn r702.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r701.
Signed-off-by: Joerg Mayer <jmayer@loplof.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r700.
Signed-off-by: Joerg Mayer <jmayer@loplof.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Reported by Mark Panajotovic <panajotovic.marko@gmail.com>.

Corresponding to flashrom svn r699.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r698.
Signed-off-by: Mark Panajotovic <panajotovic.marko@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Reported by Mark Panajotovic <panajotovic.marko@gmail.com>.

Corresponding to flashrom svn r697.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Anne Le Coq <annyvonne.le_coq@alcatel-lucent.fr> reported that flashrom
didn't recognize her ICH9 LPC controller on the Green City Intel
Customer Reference Board with ICH9 + Tylersburg Chipset. According to
http://pci-ids.ucw.cz/read/PC/8086/2910

 the ID 0x8086/0x2910 was used
for engineering samples. No intel doc mentions this ID at all.

Corresponding to flashrom svn r696.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Anne Le Coq <annyvonne.le_coq@alcatel-lucent.fr>

Mark the following boards as OK (no board-enable needed):

 - Tyan S2466 (reported by Oliver Niesner <oli@servebbs.net>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000211.html



Mark the following boards as non-working for now:

 - ASRock K7VT4A+ (reported by Udu Ogah <putlinuxonit@gmail.com>)
   Chipset detect, but no chip.
 
 - ASUS M2N68 (reported by Udu Ogah <putlinuxonit@gmail.com>)
   Chipset detect, but no chip.
 
 - ASUS A7V600-X (reported by Udu Ogah <putlinuxonit@gmail.com>)
   Chipset and chip detected, writes don't work. Board-enable required.

Also, add some missing board URLs and fix incorrect board names.

Corresponding to flashrom svn r695.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Flashrom has the ability to use layout files with romentries, but
this feature was not adapted to the programmer infrastructure and had
undefined behaviour for flasher!=internal. The romentry handling had an
off-by-one error which caused all copies to end up one byte short. Fix
these issues.

Corresponding to flashrom svn r694.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Current programmer parameter syntax is -p programmer=parameter
Unfortunately, many parameters are of the form variable=val, so we get
commandlines like this.

flashrom -p it87spi=port=0x820 and this looks horrible.

Using : instead of = would make such parameters look better: flashrom -p
it87spi:port=0x820

As a side benefit, this patch mentions the programmer name in the error
message if it is unknown.

Corresponding to flashrom svn r693.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Allow override with --force.

If write/erase failed, warn the user to get help and not shutdown/reboot
the computer.

Warn that the result of a forced read is often garbage. Too many users
believed that a forced read meant that everything was fine.

Wait 1 second between erase and verify. This fixes a few reports where
verify directly after erase had unpleasant side effects like corrupting
flash or at least getting incorrect verify results.

Corresponding to flashrom svn r692.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

We can't remove ft2232_spi.o from unconditional OBJS yet due to our
makefile structure (make features), but this patch adds #ifdefs around
all FT2232H code, so the net effect is the same.

Corresponding to flashrom svn r691.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

So far, AMD Geode LX is the only user of this infrastructure. It needs
/dev/cpu0 from ports/sysutils on FreeBSD during runtime on Geode LX.

Corresponding to flashrom svn r690.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: <putlinuxonit@gmail.com>

Corresponding to flashrom svn r689.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Don't mention coreboot.org without context.

Corresponding to flashrom svn r688.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r686.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Usage:
flashrom -p internal=fwh_idsel=0

Corresponding to flashrom svn r685.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Log:
flashrom v0.9.0-r670
coreboot table found at 0xcf7f3c00.
Vendor ID: KONTRON, part ID: 986LCD-M
Found chipset "Intel ICH7/ICH7R", enabling flash write...
Setting IDSEL=0 for top 8 MBOK.
This chipset supports the following protocols: LPC,FWH.
Disabling flash write protection for board "Kontron 986LCD-M"... OK.
Calibrating delay loop... OK.
Found chip "SST SST49LF016C" (2048 KB, FWH) at physical address
0xffe00000.
No operations were specified.
Acked-by: Chris Kinney <cmkinne@sandia.gov>

This makes sure compiled out programmers are not listed.

Tested, usage output is identical to the hardcoded variant.

Corresponding to flashrom svn r684.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

This was forgotten in flashrom svn r677 where some handcrafted MSR accesses
were still found in board-specific code.

Corresponding to flashrom svn r683.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Raises what seems to be gpio21.

Uses host controller and Promise Raid Controller for a unique match.
Tested-by: Bojan Radakovic <crnibojan@gmail.com>

Corresponding to flashrom svn r682.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

If CONFIG_SERPROG is not set, no stubs and no data of serprog will
remain.

Side benefit: This kills a few dozen lines of code.

r678, r679 and r680 made this possible. Once "Only list available
programers in usage()" is committed, even the usage message will be
adjusted automatically.

Corresponding to flashrom svn r681.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Use programmer.name to match the --programmer parameter instead of
hardcoding the name of every single programmer in main().

-p dummyfoo won't be mistaken for -p dummy anymore.

Corresponding to flashrom svn r680.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

This allows us to reduce #ifdef clauses a lot if we compile out some
programmers completely.

Corresponding to flashrom svn r679.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

FT2232 and IT87 programmers used functions of the dummy programmer
instead of fallback functions.

The dummy programmer is a "real" programmer with possible side effects
and its functions should not be abused by other programmers. Make
FT2232 and IT87 use official fallback functions instead. Create
fallback_shutdown(). Create fallback_chip_writeb(). Convert the
programmer #defines to an enum.

Corresponding to flashrom svn r678.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r677.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r676.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

This can help debug cases where the BIOS does not set up a correct flash
decode for the given flash size. The Intel docs state that the decode
applies to FWH and SPI flash.

Corresponding to flashrom svn r675.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Chris Kinney <cmkinne@sandia.gov>

AM29DL400BB, AM29DL400BT, AM29DL800BB, AM29DL800BT, AM29F004BB
AM29F004BT, AM29F200BB, AM29F200BT, AM29F400BB, AM29F400BT
AM29F800BB, AM29F800BT, AM29LV002BB, AM29LV002BT, AM29LV004BB
AM29LV004BT, AM29LV008BB, AM29LV008BT, AM29LV080B, AM29LV200BB
AM29LV200BT, AM29LV400BB, AM29LV400BT, AM29LV800BB, AM29LV800BT
HY29F002, HY29F040A, HY29F080, HY29F400B, HY29F400T, HY29F800B
HY29F800T, HY29LV400B, HY29LV400T, HY29LV800B, HY29LV800T
LH28F008BJxxPB, LH28F008BJxxPT, LH28F008SA, LH28F008SC, LH28F800BVxxBTL
LH28F800BVxxBV, LH28F800BVxxTV, LHF00L02

Corresponding to flashrom svn r674.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Some SPI chip drivers and the generic 1-byte SPI chip write functions
didn't include the automatic erase present in other chip drivers.

Since the majority is definitely auto-erase, change the remaining
explicit-erase cases to be auto-erase as well.

Corresponding to flashrom svn r673.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carlos Arnau Perez <cemede@gmail.com>

Use a proper abstraction. Kill unneeded #include statements.

Corresponding to flashrom svn r672.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Serprog compilation is now controlled by a Makefile variable.
Replace munmap with physunmap where appropriate.

Corresponding to flashrom svn r671.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r670.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Change all occurences in the source code and documentation accordingly.

Corresponding to flashrom svn r669.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Flashrom tries to match these with board enable entries in its database.
If no such board enable entry exists because the board doesn't need one,
flashrom complains. Silence that complaint.

Corresponding to flashrom svn r668.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Slightly updated and
Acked-by: Stefan Reinauer <stepan@coresystems.de>