GitLab

Due to the mysterious address handling of this chip the user can specify
a base address with the offset parameter, e.g.:
flashrom -p atavia:offset=0xFFF00000

Thanks to Idwer Vollering for his iterative testing of this code, as well as to
Martijn Bastiaan who did the last tests before merging.

Corresponding to flashrom svn r1809.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This patch combines two identical block and chip erase functions respectively:
 - Merge block_erase_m29f400bt and block_erase_en29lv640b into
   erase_block_shifted_jedec.
 - Merge block_erase_chip_m29f400bt and block_erase_chip_en29lv640b into
   erase_chip_block_shifted_jedec.

Leave their implementations in en29lv640b.c for now.

Corresponding to flashrom svn r1808.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add headers and columns (i.e. print device entries in a table-like manner).
Also, add and use test_state_to_text() to support the new test states.

Corresponding to flashrom svn r1807.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Apparently PMC did not understand the purpose of the JEDEC
continuation code. These chips reply to RES (the only supported ID
command) with the prefix-less vendor ID, a device ID, eventually
followed by the continuation byte for the vendor ID.

This fix uses only the first two bytes instead of appending the
continuation code to the device ID. The problem was reported by The
Raven who also tested the fix on a Pm25LV010 (with an imprint of
"Pm25LV010E").

Corresponding to flashrom svn r1806.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, include chipdrivers.h to find conflicting types between exported
declarations and actual implementations.

Corresponding to flashrom svn r1805.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add test_state_to_template() and use it everywhere to select the correct
template. This also enables the use of the new states in all tables.

Corresponding to flashrom svn r1804.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Check return values of various fcntl() invocations in
serialport_config(), serialport_read_nonblock() and
serialport_write_nonblock().

Also, remove some superfluous print conversion specifiers and refine
messages.

Corresponding to flashrom svn r1803.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Spi_prettyprint_status_register_default_bpX ->
spi_prettyprint_status_register_bpX_srwd

Why was the default in there anyway? :)

Corresponding to flashrom svn r1802.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1801.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

First of all, fix CID1130010: Resource leak as reported by Stefan Reinauer.
Alternatively to Stefan's approach, just move the malloc() out of the scope.

Additionally, get rid of an unnecessary exit(1) and correctly return -1 in all
error cases as documented.

Corresponding to flashrom svn r1800.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Stefan Reinauer has reported ridiculous NULL checks for arrays in our
self_check function found by Coverity (CID1130005). This patch removes
the useless checks but keeps and fixes the one responsible for the
flashchips array by exporting the array size in a new constant.

Corresponding to flashrom svn r1799.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The new enum test_state looks like this:
enum test_state {
	OK = 0,
	NT = 1,	/* Not tested */
	BAD,	/* Known to not work */
	DEP,	/* Support depends on configuration (e.g. Intel flash descriptor) */
	NA,	/* Not applicable (e.g. write support on ROM chips) */
};

The second new state 'NA' is introduced, among other things, to indicate
the erase and write states of real ROMs correctly. This is also implemented
by this patch and required to exchange the previous bit mask in struct
flashchip with a new struct containing an enum test_state for each operation.
The -L output is changed accordingly to print '-' in the case of an N/A state
and the wiki output uses a new template producing a greyed out cell.
Previous users of enum test_state are not affected by this change (yet).

Corresponding to flashrom svn r1798.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

I forgot doing so in r1789 which broke compiling the dediprog module with
-Werror (which is default). Thanks to Mike Hibbett for reporting this.

Corresponding to flashrom svn r1797.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

No datasheet available. Tested read, write and all erasers separately by
The Raven. He did also provide the patch but refused to sign it off.

Corresponding to flashrom svn r1796.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Allow to set the SPI clock frequency on AMD chipsets with a programmer
parameter. If the parameter is given (and matches a possible value), the
SPI clock is set temporarily. Both registers are restored on programmer
shutdown.

Example: ./flashrom -p internal:spispeed="33 MHz" -V

Possible values for spispeed are "16.5 MHz", "22 MHz", "33 MHz", "66 MHz",
"100 MHZ" and "800 kHz" depending on the chipset generation.

Corresponding to flashrom svn r1795.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This patch adds support for the "SPI 100" SPI engine in Yangtze FCHs
(found in Kabini and Temash).

Tested reading/writing on ASRock IMB-A180 and PC Engines' APU board.

Corresponding to flashrom svn r1794.
Signed-off-by: Wei Hu <wei@aristanetworks.com>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

 - Move programmer definition to the top.
 - Rewrite array accesses to use indices instead of using pointer arithmetic.
 - Move length check and opcode extraction to a function.
 - Move IMC parameter handling into existing IMC handling function.
 - Split comparing and resetting the FIFO pointer.

Corresponding to flashrom svn r1793.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This fixes segfaults on reads (implicit reads on writes too), ouch.
Thanks to The Raven for reporting the problem and testing my patch, and
to Alexander Irenkov for providing a workable fix for it additionally.

There were actually two problems:
1) The loop conditions were bogus which could lead to read errors
   (e.g. on implicit erase verifications).
2) The offset used within the read buffers provided to spi_nbyte_read()
   and memcpy() were not starting at 0 but the offset of the block
   within the flash chip (which has nothing to do with read buffer in
   most cases).

This patch works similarly to Alexander's but is intended to be
more readable.

Corresponding to flashrom svn r1792.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

It is very similar to LE25FW418A, except for HD_READ support (that
is not implemented in flashrom anyway yet) and allowed voltage range.

Probing, erasing, reading and writing has been tested.

This chip is found on Seagate Constellation hard drives.

Corresponding to flashrom svn r1791.
Signed-off-by: Jurij Munda <jurij.munda@uni-mb.si>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

We are more verbose inside erase_and_write_flash() although it does not
matter as much as at the end of the whole process in doit().

New output for the non-fatal (i.e. read-protected + successful recovery read) case:

Reading old flash chip contents... done.
Erasing and writing flash chip... spi_block_erase_d8 failed during command execution at address 0x8000
Reading current flash chip contents... done. spi_chip_erase_c7 failed during command execution
FAILED!
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... done.
Good, writing to the flash chip apparently didn't do anything.
Please check the connections (especially those to write protection pins) between
the programmer and the flash chip. If you think the error is caused by flashrom
please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org, thanks!

Corresponding to flashrom svn r1790.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1789.

Inspired by and mostly based on a patch
Signed-off-by: Mark Marshall <mark.marshall@omicron.at>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Because the programmer initialization that has to be called way
earlier and independently elsewhere, it does not make a lot of sense
to deinit within doit(). Also, free the logfile name at the end of
main() to catch more execution paths and because this moves it to
the other cleanup instructions.

Corresponding to flashrom svn r1788.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Tested on hardware by Idwer too.

Corresponding to flashrom svn r1787.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Tested with actual S25FL164K via Arduino SPI.

Corresponding to flashrom svn r1786.
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, refine status register prettyprinting and unlocking of the whole family.

Corresponding to flashrom svn r1785.
Signed-off-by: Jason Harper <jharper@iseis.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1784.
Signed-off-by: Michael Coppola <michael.n.coppola@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Tested mainboards:
OK:
 - abit BX6 2.0
   Reported by Stefan Tauner
 - Acer EM61SM/EM61PM (used in Acer Aspire T180)
   Reported by Benjamin Bellec
 - ADLINK Express-HR
   Reported by Obermair Thomas
 - ASUS M3N-H/HDMI
   Reported by Franc Serres
 - Attro G5G100-P
   Reported by Christoph Grenz
 - ASRock 960GM-GS3 FX
   Reported by Fuley Istvan
 - Elitegroup P6BAP-A+ (V2.2)
   Reported by Arnaldo Pirrone
 - Elitegroup GeForce7050M-M (V2.0)
   Reported by Leif Middelschulte
 - Fujitsu D3041-A1 (used in ESPRIMO P2560)
   Reported by Daggi Duck
 - GIGABYTE GA-8S648
   Reported by TeslaBIOS
 - GIGABYTE GA-970A-D3P (rev. 1.0)
   Reported by Jean-Francois Pirus
 - GIGABYTE GA-B85M-D3H
   Reported by Mladen Milinković
 - GIGABYTE GA-X79-UD3
   Reported by Jeff O'Neil
 - GIGABYTE GA-X79-UP4 (rev. 1.0)
   Reported by George Spelvin
 - GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3)
   Reported by Vangelis Skarmoutsos
 - GIGABYTE GA-Z87-HD3
   Reported by virii5
 - Lenovo Tilapia CRB
   Reported by jenkins56 on IRC
 - MSI GT60-2OD (notebook, only with layout patches)
   Reported by Vasiliy Vylegzhanin
 - MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid)
   Reported by professorll
 - MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640)
   Reported by Koen Rousseau
 - MSI MS-7125 (K8N Neo4(-F/FI/FX))
   We had a board enable for that one for years, but it was not (and still is not)
   completely clear which boards are covered.
 - MSI MS-7522 (MSI X58 Pro-E)
   Reported by Gianluigi Tiesi
 - PCWARE APM80-D3
   Reported by César Augusto Jakoby
 - Pegatron IPP7A-CP
   Reported by Илья Шипко
 - Supermicro H8QME-2
   Reported by Greg Tippitt
 - Supermicro X7SPA-H
   Reported by Kyle Bentley
 - Supermicro X7SPE-HF-D525
   Reported by Micah Anderson
 - Supermicro X8DTE
   Reported by Mark Nipper
 - Supermicro X8SIL-F
   Reported by Peter Samuelson
 - ZOTAC IONITX-A (-E) version
   Reported by Maciej Wroniecki
NOT OK:
 - Supermicro X10SLM-F
   Reported by Micah Anderson

Flash chips:
 - Atmel AT29C020 to PREW (+PREW)
   It was marked like that in the past, but I could not find the reason why the
   test bits were reset. Urja Rannikko tested it again and it still works.
 - Eon EN25F10 to PREW (+PREW)
   Reported by Stolmár Tamás
 - Eon EN25QH64 to PR (+PR)
   Reported by Vladimir 'φ-coder' Serbinenko
 - GigaDevice GD25Q32(B) to PREW (+PREW)
   Reported by mrnuke
 - Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW)
   Reported by Jamie Nichol
 - Macronix MX25L2005(C) to PREW (+PREW)
   Reported by Давыдов Дмитрий
 - Micron/Numonyx/ST N25Q064..1E to PREW (+PREW)
   Reported by Paolo Zambotti
 - Pmc Pm25LD010(C) to PREW (+PREW)
   Reported by Vasile Ceteras
 - Micron/Numonyx/ST M25P16 to PREW (+EW)
   Reported by raven
 - Micron/Numonyx/ST M25PX64 to PREW (+W)
   Reported by Zaolin
 - SST SST25VF020B to PREW (+PREW)
   Reported by Michaël Zweers
 - SST SST49LF040 to PREW (+W)
   Reported by Oskar Enoksson
 - Add support for MX25L3273E (evil twin of MX25L3205 et al.)
   Also, add MX25L1673 and MX25L6473E to the names of their twins and
   add a note about MX25L8073E.
 - Winbond W25X32 to PREW (+REW)
   Reported by The Raven
 - Winbond W29C010 etc. to PREW (+W)
   Reported by san

Chipsets tested OK:
 - Intel NM70 (8086:1e5f)
   Reported by mrnuke
 - Intel C204 (8086:1c54)
   Reported by Vasiliy Vylegzhanin
 - Intel QM67 (8086:1c4f)
   Reported by Obermair Thomas
 - Intel HM77 (8086:1e57)
   Reported by Vasiliy Vylegzhanin
 - Intel B85 (8086:8c50)
   Reported by Mladen Milinković
 - Intel HM87 (8086:8c4b)
   Reported by Vasiliy Vylegzhanin
 - Intel Z87 (8086:8c44)
   Reported by virii5
 - NVIDIA MCP51 (10de:0261)
   Reported by Marcin Kościelnicki
 - SiS 648 (1039:0648)
   Reported by TeslaBIOS

Miscellaneous:
 - Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_).
 - getrevision.sh: Ignore failing date calls.
 - getrevision.sh: Fix -u and -l for older git versions which require = for the
   git log grep parameter.
 - Corrected K8T Neo2-F entries due to a report from Stelios Tsampas.
 - Add "-p internal" to output that requests users to send flashrom -V logs.
 - Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist.
 - Tiny other stuff.

Corresponding to flashrom svn r1783.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

There is no reason for negative delays in our use cases:
 - We don't need it (to work around any quirks).
 - sleep() (POSIX) uses an unsigned argument.
 - usleep() (POSIX) uses an unsigned argument.
 - Sleep() (Windows) uses an unsigned argument.

Change all callees as well (without any complications).

Corresponding to flashrom svn r1782.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User's_Manual



Initial patch from Jadran Puharic <jpuharic@gmail.com>.

Corresponding to flashrom svn r1781.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1780.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, try to always disable WRDI because else the user is stuck
with a chip in AAI mode that won't return by itself w/o a reset.

Corresponding to flashrom svn r1779.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

The one in the error case of register_shutdown() was discovered while
reviewing the other one found by Coverity and fixed by Stefan Reinauer.

Corresponding to flashrom svn r1778.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1777.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

What we really want to do is check whether PCI_BASE_ADDRESS_2 is valid at this
point, and not PCI_BASE_ADDRESS_0.

Corresponding to flashrom svn r1776.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1775.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Memory leak in ogp_spi_init().

Corresponding to flashrom svn r1774.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1773.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1772.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1771.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1770.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>