GitLab

This patch has been cherry-picked from various patches in the chromiumos
tree denoted below.

Change-Id: I4b679e23ab37a4357b1e3d23f6f65a1c31f7d71a
Change-Id: Ibda56201ab4519315431c08206c61ceffb7c7e65
Change-Id: I540ad2d304dc69a7c79ca154beb744ef947ff808

Servo V2 has two FT4232H parts. The first one (denoted 'legacy') is
dedicated to supporting orginal Servo V1 functionality. The second,
residing at USB ID 0x18d1:5003 provides two other SPI interfaces on
port A and B respectively.

Additional changes by Alexandru Gagniuc, Hatim Kanchwala and Urja Rannikko:

 - The clock divisor is set to '6', as this creates a 10MHz SPI clock,
   which is the same SPI clock that the chromiumos branch produced.
 - Add udev rule for Google servo boards to util/flashrom.rules.
 - Add Google servo entry to manpage.

Corresponding to flashrom svn r1925.
Signed-off-by: Todd Broch <tbroch@chromium.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Hatim Kanchwala <hatim@hatimak.me>
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Hatim Kanchwala <hatim@hatimak.me>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Tested mainboards:
OK:
 - Elitegroup GF7050VT-M
   Reported by Alex
 - Fujitsu D2724-A1x (used in ESPRIMO E5625)
   Reported by Rainer Spillmann
 - Teclast X98 Air 3G
   Reported by Antonio Ospite

Flash chips:
 - Fix MX25L6405(D) definition by splitting it.
   Reported by Reggie McMurtrey
 - Add Macronix MX25L..08E family and rearrange MX25L6436E.
 - Pm49FL004 to PREW (+EW)
   Reported by Georg Sauthoff

Miscellaneous:
 - Add board enable for abit KN9 Ultra.
 - Mark ARM-USB-OCD as working OK.
 - Use "mobile devices" instead of "laptops" in output.
 - Tiny other stuff.

Corresponding to flashrom svn r1886.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

In r1872 we replaced some magic values with constant macros from
ftdi.h. Among them was DIS_DIV_5 that represents the opcode that
disables the use of the 5x prescaler on newer devices. Unfortunately
this macro was only introduced with support for FT232H and hence is
not available in older versions of the library. Revert back to using
the magic constant.

Corresponding to flashrom svn r1873.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, improve documentation of static variables cs_bits and pindir.

Corresponding to flashrom svn r1872.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Tested mainboards:
OK:
 - ASUS F2A85-M
   Reported by various corebooters
 - ASUS M2N-MX SE Plus
   Reported by Antonio
 - ASUS P5LD2
   Reported by François Revol
 - Lenovo ThinkPad T530
   Reported and partially authored by Edward O'Callaghan
 - MSI MS-7502 (Medion MD8833)
   Reported by naq on IRC
 - Shuttle AB61
   Reported by olofolleola4
 - ZOTAC IONITX-F-E
   Reported by Bernardo Kuri

Flash chips:
 - Atmel AT45DB021D to PREW (+PREW)
   Reported by The Raven
 - Atmel AT25F4096 to PREW (+PREW)
   Reported by 공준혁
 - GigaDevice GD25Q16(B) to PREW (+PREW)
   Reported by luxflow@live.com using a GD25Q16BSIG
 - Catalyst CAT28F512
   Mark erase and write as known bad (not implemented)

Miscellaneous:
 - Various spelling corrections by Daniele Forsi.
 - Added and refined a bunch of chips originally investigated by Carl-Daniel.
 - Marked the ARM-USB-OCD-H programmer as tested
   (reported by Ruud Schramp).
 - Tiny other stuff.

Corresponding to flashrom svn r1839.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Register_programmer suggests that we register a programmer. However,
that function registers a master for a given bus type, and a programmer
may support multiple masters (e.g. SPI, FWH). Rename a few other
functions to be more consistent.

Corresponding to flashrom svn r1831.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Tested mainboards:
OK:
 - abit BX6 2.0
   Reported by Stefan Tauner
 - Acer EM61SM/EM61PM (used in Acer Aspire T180)
   Reported by Benjamin Bellec
 - ADLINK Express-HR
   Reported by Obermair Thomas
 - ASUS M3N-H/HDMI
   Reported by Franc Serres
 - Attro G5G100-P
   Reported by Christoph Grenz
 - ASRock 960GM-GS3 FX
   Reported by Fuley Istvan
 - Elitegroup P6BAP-A+ (V2.2)
   Reported by Arnaldo Pirrone
 - Elitegroup GeForce7050M-M (V2.0)
   Reported by Leif Middelschulte
 - Fujitsu D3041-A1 (used in ESPRIMO P2560)
   Reported by Daggi Duck
 - GIGABYTE GA-8S648
   Reported by TeslaBIOS
 - GIGABYTE GA-970A-D3P (rev. 1.0)
   Reported by Jean-Francois Pirus
 - GIGABYTE GA-B85M-D3H
   Reported by Mladen Milinković
 - GIGABYTE GA-X79-UD3
   Reported by Jeff O'Neil
 - GIGABYTE GA-X79-UP4 (rev. 1.0)
   Reported by George Spelvin
 - GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3)
   Reported by Vangelis Skarmoutsos
 - GIGABYTE GA-Z87-HD3
   Reported by virii5
 - Lenovo Tilapia CRB
   Reported by jenkins56 on IRC
 - MSI GT60-2OD (notebook, only with layout patches)
   Reported by Vasiliy Vylegzhanin
 - MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid)
   Reported by professorll
 - MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640)
   Reported by Koen Rousseau
 - MSI MS-7125 (K8N Neo4(-F/FI/FX))
   We had a board enable for that one for years, but it was not (and still is not)
   completely clear which boards are covered.
 - MSI MS-7522 (MSI X58 Pro-E)
   Reported by Gianluigi Tiesi
 - PCWARE APM80-D3
   Reported by César Augusto Jakoby
 - Pegatron IPP7A-CP
   Reported by Илья Шипко
 - Supermicro H8QME-2
   Reported by Greg Tippitt
 - Supermicro X7SPA-H
   Reported by Kyle Bentley
 - Supermicro X7SPE-HF-D525
   Reported by Micah Anderson
 - Supermicro X8DTE
   Reported by Mark Nipper
 - Supermicro X8SIL-F
   Reported by Peter Samuelson
 - ZOTAC IONITX-A (-E) version
   Reported by Maciej Wroniecki
NOT OK:
 - Supermicro X10SLM-F
   Reported by Micah Anderson

Flash chips:
 - Atmel AT29C020 to PREW (+PREW)
   It was marked like that in the past, but I could not find the reason why the
   test bits were reset. Urja Rannikko tested it again and it still works.
 - Eon EN25F10 to PREW (+PREW)
   Reported by Stolmár Tamás
 - Eon EN25QH64 to PR (+PR)
   Reported by Vladimir 'φ-coder' Serbinenko
 - GigaDevice GD25Q32(B) to PREW (+PREW)
   Reported by mrnuke
 - Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW)
   Reported by Jamie Nichol
 - Macronix MX25L2005(C) to PREW (+PREW)
   Reported by Давыдов Дмитрий
 - Micron/Numonyx/ST N25Q064..1E to PREW (+PREW)
   Reported by Paolo Zambotti
 - Pmc Pm25LD010(C) to PREW (+PREW)
   Reported by Vasile Ceteras
 - Micron/Numonyx/ST M25P16 to PREW (+EW)
   Reported by raven
 - Micron/Numonyx/ST M25PX64 to PREW (+W)
   Reported by Zaolin
 - SST SST25VF020B to PREW (+PREW)
   Reported by Michaël Zweers
 - SST SST49LF040 to PREW (+W)
   Reported by Oskar Enoksson
 - Add support for MX25L3273E (evil twin of MX25L3205 et al.)
   Also, add MX25L1673 and MX25L6473E to the names of their twins and
   add a note about MX25L8073E.
 - Winbond W25X32 to PREW (+REW)
   Reported by The Raven
 - Winbond W29C010 etc. to PREW (+W)
   Reported by san

Chipsets tested OK:
 - Intel NM70 (8086:1e5f)
   Reported by mrnuke
 - Intel C204 (8086:1c54)
   Reported by Vasiliy Vylegzhanin
 - Intel QM67 (8086:1c4f)
   Reported by Obermair Thomas
 - Intel HM77 (8086:1e57)
   Reported by Vasiliy Vylegzhanin
 - Intel B85 (8086:8c50)
   Reported by Mladen Milinković
 - Intel HM87 (8086:8c4b)
   Reported by Vasiliy Vylegzhanin
 - Intel Z87 (8086:8c44)
   Reported by virii5
 - NVIDIA MCP51 (10de:0261)
   Reported by Marcin Kościelnicki
 - SiS 648 (1039:0648)
   Reported by TeslaBIOS

Miscellaneous:
 - Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_).
 - getrevision.sh: Ignore failing date calls.
 - getrevision.sh: Fix -u and -l for older git versions which require = for the
   git log grep parameter.
 - Corrected K8T Neo2-F entries due to a report from Stelios Tsampas.
 - Add "-p internal" to output that requests users to send flashrom -V logs.
 - Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist.
 - Tiny other stuff.

Corresponding to flashrom svn r1783.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User's_Manual



Initial patch from Jadran Puharic <jpuharic@gmail.com>.

Corresponding to flashrom svn r1781.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Once upon a time usbdev_status was created for the ft2232
programmer. Its IDs are semantically different to pcidev_status
because they indicate USB instead of PCI IDs, but apart from that
both data structures are equal. This change makes life easier for
everything involved in handling and printing the status of devices
that is noted in those structures by combining them into dev_entry.

It is still possible to distinguish between PCI and USB devices
indirectly by using the struct programmer's type field.

Also, add a programmer column to the PCI and USB devices lists.

Corresponding to flashrom svn r1632.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

To be able to get rid of lots of #ifdefs and centralize programmer-specific
data more...
 - introduce two new fields to struct programmer_entry, namely
   enum type (OTHER, USB, PCI) and union devs (pcidev_status, usbdev_status
   or char *note).
 - use those fields to generate device listings in print.c and print_wiki.c.

Bonus: add printing of USB devices to print_wiki.c and count supported PCI
and USB devices.

Corresponding to flashrom svn r1631.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested Mainboards:
OK:
 - Foxconn P55MX
   http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html

Tested flash chips:
 - Eon EN25F64 to PR (+PR)
   http://paste.flashrom.org/view.php?id=1426
 - Macronix MX25L1005 to PREW (+PREW)
   http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html
 - Set SST39VF512 to PREW (+W)
   http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html



Tested chipsets:
 - Z77 (only reading was really tested)

Miscellaneous:
 - Fix ft2232_spi's parameter parsing.
 - Fix nicrealtek's init (always segfaulted since r1586 oops).
 - Add another T60 variant to the laptop whitelist.
 - Improve message shown when image file size does not match flash chip
 - Refine messages regarding the flash descriptor override strap according
   to the findings by Vladislav Bykov on his P55MX.
 - Fix the ID of EN25F64.
 - Demote and clarify debug message in serprog_delay().
 - Minor other cleanups.

Corresponding to flashrom svn r1613.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

 - Use libftdi's error string to add more detail.
 - Add full stops to messages.
 - Minor white space fixes.

Corresponding to flashrom svn r1610.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

For older versions of libftdi we define TYPE_232H ourselves and this
seems to be enough to get at least basic support (and we don't need
more than that AFAICT).

Corresponding to flashrom svn r1609.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add a check to validate the selected channel/interface, which not even
libftdi seems to do yet.
This patch changes default behavior: the new default channel/interface is A.
Also, this patch uses the word 'channel' in addition or in place of 'interface'
where possible without too much hassle because it is the term FTDI uses.

Corresponding to flashrom svn r1608.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Requires libftdi > 0.5 (2004, commit ID a8f46ddc1595b1b07abfcce613acdafe5b8ddf9d).
Idea stolen from chromiumos commit 5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68



Corresponding to flashrom svn r1599.
Signed-off-by: Shik Chen <shik@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This patch just fixes a limited number of bits not conforming to c99 by using
 - __asm__ instead of just asm
 - {0} instead of {} for struct initialization
 - h_addr_list[0] instead of h_addr to access the host address in
   struct hostent
 - #include <strings.h> where needed (for ffs and strcasecmp)

Based on a previous patch by Carl-Daniel.

Corresponding to flashrom svn r1585.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Else libftdi complains that it is impossible to set interface on an already
open device since 1c5fa36b67bc30742eee94ed3e3648fcd4640f24
(which will probably end up in libftdi 0.21).

Corresponding to flashrom svn r1573.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Currently spi_aai_write() is implemented without an abstraction
mechanism for the programmer driver. This adds another function
pointer 'write_aai' to struct spi_programmer, which is set to
default_spi_write_aai (renamed spi_aai_write) for all programmers
for now.

A patch which utilises this abstraction in the dediprog driver will
follow.

Corresponding to flashrom svn r1543.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The patch that should have improved the clock divisor setting in r1537 made
it much worse: the divisor used was from an uninitialized buffer.

Corresponding to flashrom svn r1542.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This adds an optional argument when using the ft2232_spi programmer to set
the frequency divisor. The valid values for the divisor is any even integer
between 2 and 131072.

Corresponding to flashrom svn r1537.
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

These devices have an additional output buffer which is activated only
by pulling ADBUS4 low. This patch was real-life tested with
arm-usb-ocd; arm-usb-ocd-h should be the same (as it shares the same
documentation).

Corresponding to flashrom svn r1478.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

All programmer access function prototypes except init have been made
static and moved to the respective file.

A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.

The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.

Corresponding to flashrom svn r1474.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

http://www.goepel.com/en/jtagboundary-scan/hardware/picotap.html

This device is actually a JTAG adapter, but since it uses standard
FT2232 A interface pins, it can be easily used as SPI programmer
(tested it here successfully). PicoTAP supports only 5V output, so one
needs to reduce this to 3.3V in a same manner as DLP Design DLP-USB1232H, see

  http://flashrom.org/FT2232SPI_Programmer#DLP_Design_DLP-USB1232H



for details.

The PicoTAP pin-out is as follows:

  PicoTAP |  SPI
 ---------+-------
    TCK   | SCLK
    TMS   |  CS#
    TDI   |  SO
    TDO   |  SI
   /TRST  |  -
    GND   |  GND
    +5V   |  VCC, HOLD# & WP# after 3.3V regulator

I managed to run PicoTAP in 10MHz, 15MHz and 30MHz modes (by forcing
DIVIDE_BY), against SST25VF016B SPI flash, read/write/erase all worked
fine (write seems somewhat slow).

Corresponding to flashrom svn r1453.
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Thanks to TIAO/DIYGADGET for sponsoring a test device!

This is an FTDI FT2232H based device which provides an easily accessible JTAG,
SPI, I2C, serial breakout. The SPI part can be used to flash SPI flash chips
using flashrom.

http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html
http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual#SPI_Connector_1



There are two SPI connectors (pin headers) on the board: SPI1, which is
connected to the FT2232H's A interface, and SPI2, which is connected to the
chip's B interface. Both can be used to flash SPI chips:

 flashrom -p ft2232_spi:type=tumpa,port=A
 flashrom -p ft2232_spi:type=tumpa,port=B

The default interface is A, so for SPI1 you can also just write:

 flashrom -p ft2232_spi:type=tumpa

I tested all operations on both interfaces, everything works fine.

Corresponding to flashrom svn r1451.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This is related to the spi split patch as discussed in:
http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364


the old commit (r914) log notes:
"Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c
  ichspi.c   sb600spi.c   wbsio_spi.c   buspirate_spi.c   ft2232spi.c   bitbang_spi.c   dediprog.c"

there still remain a few cases where chipdrivers.h is needed:
dediprog.c (spi_read_chunked and spi_write_chunked)
it87spi.c (due to spi_write_enable and spi_read_status_register)
wbsio_spi.c (spi_programmer registration only)

besides that, there are also non-spi files that do not need it.
also, add flash.h to chipdrivers.h because it uses some types of it
and remove flashchips.h from print.c

Corresponding to flashrom svn r1414.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

- Mixing uninitialized and initialized local variables leads to
  confusion.
- ft2232_spi error cases should have gotten some error handling, and
  that's the reason the curly braces were there.
- Fixing typos/wording in some places would have been nice given that
  those places were touched anyway.

Corresponding to flashrom svn r1413.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add support for the Dangerous Prototypes Bus Blaster (v1/v2).
The new model is called "busblaster".
So far only v2 has been tested, but since both v1 and v2
emulate a Amontec JTAGKEY in the default configuration,
it is assumed that v1 should work fine as well.

Information about the Busblaster can be found at:
http://dangerousprototypes.com/docs/Bus_Blaster



Corresponding to flashrom svn r1412.
Signed-off-by: Steve Markgraf <steve@steve-m.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE
where possible, wrap overly long line, etc.

Compile-tested. There should be no functional changes.

Corresponding to flashrom svn r1397.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

In order to make the ft2232_spi code more usable in libflashrom (e.g. from
frontends/GUIs) there must not be any exit() calls in the code, as that
would also terminate the frontend. Thus, replace all exit() calls with
proper error handling code by returning a _unique_ negative error number,
so that the frontend (and/or user/developer) can also know a bit more
exactly _which_ error occured, not only _that_ an error occured.

Also, call ftdi_usb_close() before returning due to errors.

Corresponding to flashrom svn r1377.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Tadas Slotkus <devtadas@gmail.com>

- add support for Olimex' ARM-USB-TINY, ARM-USB-TINY-H, ARM-USB-OCD
AND ARM-USB-OCD-H and adjust man page - minor string change ("First
International Computer, Inc." -> "FIC")

Corresponding to flashrom svn r1331.
Signed-off-by: Pete Batard <pbatard@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.

Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").

Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1298.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add support for the OpenMoko Neo1973/Neo FreeRunner debug board version
2 or 3 (vid:pid 1457:5118).

The new type is called "openmoko".

Information about the debug board can be found at
http://wiki.openmoko.org/wiki/Debug_Board_v3



Corresponding to flashrom svn r1231.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

ft2232_spi ftdi_usb_open() is called with the constant FTDI_VID vendor
ID.

Fix it by using the programmer-type-dependent ft2232_vid variable, to
allow programmers with other vendor IDs.

Corresponding to flashrom svn r1230.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Check at init time whether the chip is a type 'H' (FT2232H or FT4232H).
If not, omit the disable-divide-by-5 (0x8a) command which can confuse
older chips.

Corresponding to flashrom svn r1229.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

It is possible that ftdi_read_data() returns less data
than requested. Catch this case and retry reading the rest
of the buffer.

Corresponding to flashrom svn r1228.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

CONFIG_BITBANG_SPI was not selected if CONFIG_NICINTEL_SPI was on by default.
Wiki output was missing all flash chips if CONFIG_INTERNAL was not
selected.
Use correct type for toupper()/tolower()/isspace() functions.
Specify software requirements in a generic way.
Non-x86 compilation does not work with the default programmer set, so
list the make parameters which result in a working build.

Corresponding to flashrom svn r1203.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Flashrom -L output did not contain a list of programmers nor were
all programmers listed. Fix it and mention at least the name of each
programmer. Wiki output is unchanged, and will need separate fixups.

Corresponding to flashrom svn r1199.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r1196.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Not sure if this is the final/correct fix, but for now it definately
fixes writes on FT2232H hardware. I have tested this on both, the
DLP Design DLP-USB1232H, and the openbiosprog-spi hardware.

Thanks to Joshua Roys <roysjosh@gmail.com> for the hint on IRC.

Corresponding to flashrom svn r1190.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>