GitLab

Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).

The new header structure is as follows (and yes, improvements are
possible):
flashchips.h  flash chip IDs
chipdrivers.h  chip-specific read/write/... functions
flash.h  common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h  programmer specific functions
coreboot_tables.h  header from coreboot, internal programmer only
spi.h SPI command definitions

Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Constify variables where possible.
Initialize programmer-related variables explicitly in programmer_init to
allow running programmer_init from a clean state after
programmer_shutdown.
Prohibit registering programmer shutdown functions before init or after
shutdown.
Kill some dead code.
Rename global variables with namespace-polluting names.
Use a previously unused locking helper function in sst49lfxxxc.c.

This is needed for libflashrom.

Effects on the binary size of flashrom are minimal (300 bytes
shrinkage), but the data section shrinks by 4384 bytes, and that's a
good thing if flashrom is operating in constrained envionments.

Corresponding to flashrom svn r1068.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.

Replace a few printf with msg_* to eliminate the need for stdio.h.

Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Some of the spi programmer drivers required chipdrivers.h, needs fixing later:
  it87spi.c
  ichspi.c
  sb600spi.c
  wbsio_spi.c
  buspirate_spi.c
  ft2232spi.c
  bitbang_spi.c
  dediprog.c

Corresponding to flashrom svn r914.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

That's necessary to use bulk transfers, and just the
right thing in any case.

Corresponding to flashrom svn r891.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Speed up reads by a factor of 4 by switching block size from 4 to 16.
Add support for 4 byte RDID.
Add USB error decoding via usb_strerror.

Corresponding to flashrom svn r879.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Reverse engineered from USB logs. I never touched that programmer nor
did I ever see the associated software.
Disabled by default until it is complete. The driver needs to be hooked
up to the SPI core before it will do anything besides init and
diagnostics.

I successfully reverse engineered all commands, but some are still
somewhat magic.
Logs from "flashrom -p dediprog -V" are appreciated.

Probe and read should work, erase/write is expected to explode.
The programmer will set voltage to 0 on exit.

Thanks a lot to Stefan Reinauer and Patrick Georgi for providing USB
logs and for testing the result.

Corresponding to flashrom svn r870.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>