GitLab

An opaque programmer does not allow direct flash access and only offers
abstract probe/read/erase/write methods.
Due to that, opaque programmers need their own infrastructure and
registration framework.

Corresponding to flashrom svn r1459.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

- probe_timing was changed to unsigned although we use negative values
  for special cases
- some code was not changed along hence did no longer compile:
  * dediprog's read and write functions
  * linux_spi's read and write functions
- it introduced a number of new sign conversion warnings
  (http://paste.flashrom.org/view.php?id=832

)

To be safe this patch reverts all changes made in r1448, a corrected
patch will follow later.

Thanks to idwer for pointing out the problem first!

Corresponding to flashrom svn r1450.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1448.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested by Mattias Mattsson <vitplister@gmail.com> on a PowerPC box.

Corresponding to flashrom svn r1420.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This is related to the spi split patch as discussed in:
http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364


the old commit (r914) log notes:
"Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c
  ichspi.c   sb600spi.c   wbsio_spi.c   buspirate_spi.c   ft2232spi.c   bitbang_spi.c   dediprog.c"

there still remain a few cases where chipdrivers.h is needed:
dediprog.c (spi_read_chunked and spi_write_chunked)
it87spi.c (due to spi_write_enable and spi_read_status_register)
wbsio_spi.c (spi_programmer registration only)

besides that, there are also non-spi files that do not need it.
also, add flash.h to chipdrivers.h because it uses some types of it
and remove flashchips.h from print.c

Corresponding to flashrom svn r1414.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add lock printing for AMIC A25L05PT, A25L05PU, A25L10PT, A25L10PU,
A25L20PT, A25L20PU, A25L40PT, A25L40PU, A25L80P, A25L16PT, A25L16PU,
A25L512, A25L010, A25L020, A25L040, A25L080, A25L016, A25L032, A25LQ032
to a25.c.

Add lock printing for Atmel AT26DF081A, AT26DF161, AT26DF161A,
AT26DF321.

Move Atmel AT25*/AT26* lock related functions originally added in r1115
from spi25.c to at25.c.

For SPI chips the lock printing was handled by one common function, but
sharing a common function which only is a big switch() statement doesn't
make sense, especially if we can define lock printing functions per
flash chip anyway.

The printlock function pointer in struct flashchip is used to print
status register and locking information, and serves as replacement for
implicit status register and lock printing during probe. That code will
later be changed to store locking info in a machine- accessible data
structure so flashrom can handle locked regions correctly.

Corresponding to flashrom svn r1316.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

As the comment indicates, that function is not a chip erase function
at all, but a function calling a block eraser in a loop. So it adds
no extra value to what we already have in the block_eraser
infrastructure.

Furthermore, that function assumes a uniform sector size layout, but
is referenced from flash chip with non-uniform sector size layout, which
is just wrong.

Corresponding to flashrom svn r1287.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1268.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add code for the unlocking (erasing/writing) of Winbond W39V040FB
chips, enabling erasing/writing this type of chip.

Corresponding to flashrom svn r1248.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Print lock status for all supported Winbond W39* chips:
W39V040A, W39V040B, W39V040C, W39V040FA, W39V040FB, W39V040FC,
W39V080A, W39V080FA, W39V080FA (dual mode).

Fill in correct probe timing for Winbond W39V040C and W39V080FA.

Please note that the W39V040B/W39V040FB pair has identical IDs,
identical read/write/erase, but locking differs. Same applies to
W39V040C/W39V040FC. This causes double detection on chipsets which
support LPC and FWH, making flashing more difficult because the user
has to select the correct chip. This is called the evil twin problem.
A better evil twin handling (patch available) will resolve that problem.

Corresponding to flashrom svn r1245.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

The inner write functions which handle partial write are renamed to the
original name of their wrappers. The write wrappers are removed.

Corresponding to flashrom svn r1211.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Andrew Morgan <ziltro@ziltro.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Sean Nelson <audiohacked@gmail.com> 
Acked-by: Sean Nelson <audiohacked@gmail.com> 

Kill duplicated code.

Annotate write functions with their chunk size.

Mark Fujitsu MBM29F400BC and ST M29F400BB as untested because their
write code no longer uses a broken layout.

Corresponding to flashrom svn r1210.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Sean Nelson <audiohacked@gmail.com> 
Acked-by: Sean Nelson <audiohacked@gmail.com> 

The currently used write functions (wrappers) all use helpers which
perform the actual write (inner functions).

The signature of the write wrappers is: int write_chip(struct flashchip
*flash, uint8_t * buf);

The signature of the inner write functions varied a lot. This patch
changes them to: int write_part(struct flashchip *flash, uint8_t *src,
int start, int len);

Did you know that flashrom has only 8 inner write functions for all
flash chips? write_page_write_jedec_common write_sector_jedec_common
write_sector_28sf040 spi_chip_write_256_new spi_chip_write_1_new
spi_aai_write_new write_page_82802ab write_page_m29f400bt

Export all inner write functions.

Change the function signature of wait_82802ab to eliminate single-use
variables.

Remove an error message in write_page_m29f400bt which was printed for
every byte written regardless of success.

Add sharplhf00l04.c to the list of flash chip drivers in the Makefile.
While the functions in there are unused, I suspect we will need them
later, and by hooking the file up we ensure that compilation won't
break.

Corresponding to flashrom svn r1208.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Flashrom had an implicit erase-on-write for most flash chip and
programmer drivers, but it was not entirely consistent.

Some drivers had their own hand-rolled partial update functionality
which made handling partial updates from generic code impossible.

Move implicit erase out of chip drivers, and kill some dead erase
functions at the same time. A full chip erase is now performed in the
generic code for all flash chips on write, and after that the whole chip
is written.

Corresponding to flashrom svn r1206.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Use AAI write for SST SST25VF032B.
Speedup from 228 to 113 seconds.

Use page (256 byte) write for SST SST25VF064C.
Speedup from 3091 to 123 seconds.

Corresponding to flashrom svn r1194.
Signed-off-by: Helge Wagner <helge.wagner@ge.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add support for Atmel AT25DF081A and AT25DQ161.

Some chips require EWSR before WRSR, others require WREN before WRSR,
and some support both variants. Add feature_bits to select the correct
SPI command, and default to EWSR.

Corresponding to flashrom svn r1115.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Steven Rosario
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Use full-chip write function on Fujitsu MBM29F400TC and ST M29F400BT.
Add support for ST M29F400BB.

Corresponding to flashrom svn r1083.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Actually check if the unlock worked instead of just assuming it worked.

Corresponding to flashrom svn r1082.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

However, wrap the write functions in a compat layer to allow converting
the rest of flashrom later. Tested on Intel NM10 by David Hendricks.

Corresponding to flashrom svn r1080.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Besides that, the function as implemented just walks the chip and
ignores sector sizes.
Sector erase with SPI opcode 0xd8 is of course still supported.
Kill a declaration for a nonexisting function while we're at it.

Corresponding to flashrom svn r1054.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Some chips implement the RES (0xab) opcode, but they use a non-standard
two byte response instead of the usual one byte response. A two-byte
response has the accuracy of REMS and RDID, so don't check for REMS/RDID
availability before running a two-byte RES.

Corresponding to flashrom svn r1017.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Every SPI programmer driver had its own completely different chip write
implementation, and all of them were insufficiently commented. Create
spi_write_chunked as a copy of spi_read_chunked and convert all SPI
programmers to use it. No functional changes except: - Bus Pirate uses
12 Byte writes instead of 8 Byte writes - SB600 uses 5 Byte writes
instead of 1 Byte writes

Corresponding to flashrom svn r1005.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: David Hendricks <dhendrix@google.com>

Sst49lfxxxc software status register is functionally the same as the 
82802ab status register, "Block Protect Status"(49lfxxxc) can be treated 
the same as "Device Protect Status"(82802ab).
Erase_block_49lfxxxc is the same command sequence as erase_block_82802ab.
Add unlock_49lfxxxc to chips definitions.
Write_sector_49lfxxxc is the same as write_page_82802ab.

Corresponding to flashrom svn r972.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r966.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Rename print_82802ab_status to print_status_82802ab add unlock_82802ab strip unlock code from erase_block_82802ab rename erase_82802ab_block  to erase_block_80280ab delete sharplhf00l04.o from Makefile delete *_lhf00l04* from chipdrivers.h.

add unlock_stm50flw0x0x
delete wait_stm50flw0x0x
delete write_page_stm50flw0x0x
convert erase_stm50flw0x0x to erase_chip_stm50flw0x0x
delete write_stm50flw0x0x
add unlock_82802ab to two Intel chips with TEST_BAD_WRITE
change the status of 82802AB, 82802AC, M50FW040, M50FW080 to TEST_OK_PR

Corresponding to flashrom svn r948.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Convert _sst_fwhub functions to jedec.

Corresponding to flashrom svn r943.

kill unused sst_fwhub.c functions
make unlock_* check if unlock was successful and only return 0 when fully successful
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Remove function probe_28sf040.

Corresponding to flashrom svn r942.

delete references to dead sharplhf00l04.c and sst29sf040.c functions from chipdrivers.h
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

 - remove some copied functions (from 82802ab.c) and use the 82802ab equivalents
 - fix missing prototypes to *_82802ab functions

Corresponding to flashrom svn r941.

fix missing prototypes to _82802ab functions
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r940.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r939.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add FEATURE_REGISTERMAP to * Intel 82802AB, 82802AC * Sharp LHF00L04 * SST SST49LF004C, SST49LF008C, SST49LF016C, SST49LF160C * ST M50FLW040A, M50FLW040B, M50FLW080A, M50FLW080B, M50FW002, M50FW016      M50FW040, M50FW080, M50LPW116.

Make register mapping conditional on FEATURE_REGISTERMAP in 82802ab.c.
Replace probe_49lfxxxc with probe_82802ab.
Replace probe_28sf040 with probe_82802ab.
Replace probe_sst_fwhub with probe_jedec.
Add printlock_sst_fwhub to chips which used probe_sst_fwhub.

Corresponding to flashrom svn r937.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Now the only remaining and used function in pm49fl00x.c is unlock_49fl00x.

Also:
 - Add missing unlock to AMIC A49LF040A.
 - Add lock_49fl00x function.

Corresponding to flashrom svn r917.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

We also need to 'svn rm' the following files:
  am29f040b.c
  en29f002a.c
  m29f002.c
  mx29f002.c
  pm29f002.c
  sst49lf040.c
  w49f002u.c

Corresponding to flashrom svn r909.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Fixes missing unlock for certain chips:
 * unlock_49lf00x
    * Pm49fl002
    * Pm49fl004

 * unlock_49flxxxc
    * SST49LF160C

 * unlock_winbond_fwhub
    * W39V080FA
    * W39V080FA (dual mode)

Fixes missing printlock for certain chip:
 * printlock_w39v040c
    * W39V040C

Corresponding to flashrom svn r907.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Convert the following chips to block_erasers: SST28SF040A SST29EE010
SST29LE010 SST29EE020A SST29LE020 SST39SF010A SST39SF020A SST39SF040
SST39VF512 SST39VF010 SST39VF020 SST39VF040 SST39VF080 SST49LF002A/B
SST49LF003A/B SST49LF004C SST49LF008A SST49LF008C SST49LF016C SST49LF020
SST49LF020A SST49LF040 SST49LF040B SST49LF080A SST49LF160C .

Extend sst28sf040 to include chip and sector functions for block_eraser.
Extend sst49lfxxxc to include chip, sector, block erasers functions for
block_erasers. Extend sst_fwhub to include chip and sector functions for
block_erasers. Add copyrights to changed files. Killed erase_sst_fwhub.
Killed erase_49lfxxxc. NULL A/A mux mode full chip erasers. Ignore block
locks in erase/write. Change comments from "PP mode" to "A/A mux mode"

Corresponding to flashrom svn r877.

Signed-off-by: Sean Nelson <audiohacked@gmail.com> 
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Convert chips to block_erasers:

SyncMOS S29C31004T
SyncMOS S29C51001T
SyncMOS S29C51002T
SyncMOS S29C51004T
TI TMS29F002RT
TI TMS29F002RB

SyncMOS chips have Uniform sector; boot blocks on chips are made up of uniform sectors but have locking.

Corresponding to flashrom svn r871.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Convert chips to block_erasers:
ST_M25PE10
ST_M25PE20
ST_M25PE40
ST_M25PE80
ST_M25PE16
PMC_25LV010
PMC_25LV016B
PMC_25LV020
PMC_25LV040
PMC_25LV080B
PMC_25LV512
PMC_39F010
PMC_49FL002
PMC_49FL004
SANYO_LE25FW203A
SPANSION_S25FL016A

Added spi_block_erase_d7 for PMC chips.

Corresponding to flashrom svn r867.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Some mingw declares a global identifier "byte", causing -Werror -Wshadow
to break compilation. This patch renames all identifiers called "byte".

Corresponding to flashrom svn r861.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Convert chips to block_erasers:
ASD AE49F2008
AMIC A25L40P(T/U)
AMIC A49LF040A
EMST F49B002UA
Eon EN25B05
Eon EN25B10
Eon EN25B20
Eon EN25B40
Eon EN25B80
Eon EN25B16
Eon EN25B32
Eon EN25B64
Eon EN25D16
Eon EN25F05
Eon EN25F10
Eon EN25F20
Eon EN25F40
Eon EN25F80
Eon EN25F16
Eon EN25F32
Intel 28F001BX-B
Intel 28F001BX-T
Intel 82802AB
Intel 82802AC
Macronix MX25L1635D
Macronix MX25L3235D
Macronix MX25L6405
Macronix MX25L12805
Macronix MX29F001B
Macronix MX29F001T
Macronix MX29LV040

Added new chips (according to datasheets):
Eon EN25B05T
Eon EN25B10T
Eon EN25B20T
Eon EN25B40T
Eon EN25B80T
Eon EN25B16T
Eon EN25B32T
Eon EN25B64T

Added minor Device IDs for Eon EN25Bxx{T,B} chips.

Corresponding to flashrom svn r843.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

- Add eraseblock definitions
- Use correct eraseblock sizes (the datasheet is a bit ambiguous)
- Use correct probe function
- Fill in probe timing

There is a lot more stuff left to clean up, but at least probe and erase
should work now.

Corresponding to flashrom svn r837.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>