GitLab

It doesn't make sense to have different layouts for the same function
on one chip. Keep going if an error is found, we want all errors to be
reported in one fell swoop.

Corresponding to flashrom svn r869.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

W_25X10
W_25X20
W_25X40
W_25X80
W_25X16
W_25X32
W_25X64
W_29C011
W_29C020C
W_29C040P
W_29EE011
W_39V040A
W_39V040B
W_39V040C
W_39V040FA
W_39V080A
W_49F002U
W_49V002A
W_49V002FA
W_39V080FA
W_39V080FA_DM

Corresponding to flashrom svn r868.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Convert chips to block_erasers:
ST_M25PE10
ST_M25PE20
ST_M25PE40
ST_M25PE80
ST_M25PE16
PMC_25LV010
PMC_25LV016B
PMC_25LV020
PMC_25LV040
PMC_25LV080B
PMC_25LV512
PMC_39F010
PMC_49FL002
PMC_49FL004
SANYO_LE25FW203A
SPANSION_S25FL016A

Added spi_block_erase_d7 for PMC chips.

Corresponding to flashrom svn r867.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Public chipset documentation available at
http://www.intel.com/Assets/PDF/datasheet/322896.pdf



Tested on NM10-based customer reference board from Intel.

Corresponding to flashrom svn r866.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r865.

Thanks to hailfinger's self-check-erase routine for catching this.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Flashrom performs a self-check on every startup before it even starts to
initialize any programmer.

That way, compiler errors and code errors will be caught before they can
do any harm. This patch adds an eraseblock structure self-check. It also
modifies the self-check code to consistently run all checks even if one
check failed.

Corresponding to flashrom svn r864.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Thanks to Michael Karcher for noticing.

Corresponding to flashrom svn r863.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Tested with read/erase/write (including verify). I only wrote the image
that was read before - don't want to brick my laptop.

Corresponding to flashrom svn r862.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Some mingw declares a global identifier "byte", causing -Werror -Wshadow
to break compilation. This patch renames all identifiers called "byte".

Corresponding to flashrom svn r861.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This is not just for fun. We hit a real bug on BSD with the outl macros.
The macro variable tmp collided with the tmp from outer scope.

second revision, now also taking care of inb/inw/inl. While that shadowing
did not introduce bugs (yet), of course it breaks the build on BSD when
-Wshadow is enabled.

Corresponding to flashrom svn r860.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>

Also remove separate sis 5596 routine: superio code will be handled
separately, which then turns this routine into the sis 5511 chipset
enable.

Corresponding to flashrom svn r859.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

If neither internal (old default) nor dummy (safe default) programmer
are selected, we must pick a sensible default programmer.

Since there is no reason to prefer a particular external programmer,
we abort compilation if more than one of them is selected. If only one
is selected, it is clear that the user wants that one to become the
default. This fixes single-programmer compilation.

Corresponding to flashrom svn r858.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Corresponding to flashrom svn r857.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

They previously had TIMING_IGNORED, but now they use probe_jedec
directly or indirectly and that function does not ignore probe timing.

Corresponding to flashrom svn r856.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Change one msg_pdbg to msg_pinfo, change 7 msg_pinfo to msg_pdbg.

Corresponding to flashrom svn r855.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Fix one pinfo message to be pdbg.

Corresponding to flashrom svn r854.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Rename some msg_pdbg to msg_pspew.

Corresponding to flashrom svn r853.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r852.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r851.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r850.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r849.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r848.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r847.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This (hopefully obviously correct) patch fixes the issue. As a previous
version (before adding the debugging statement) was already executed on
the board, the missing OUTW was executed on the testers machine on an
earlier flashrom run.

Corresponding to flashrom svn r846.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>

Corresponding to flashrom svn r845.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sergey Lichack <shadowpilot34@gmail.com>

.features was always regenerated in that case, triggering whole-project
recompiles even if nothing changed.

Corresponding to flashrom svn r844.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Convert chips to block_erasers:
ASD AE49F2008
AMIC A25L40P(T/U)
AMIC A49LF040A
EMST F49B002UA
Eon EN25B05
Eon EN25B10
Eon EN25B20
Eon EN25B40
Eon EN25B80
Eon EN25B16
Eon EN25B32
Eon EN25B64
Eon EN25D16
Eon EN25F05
Eon EN25F10
Eon EN25F20
Eon EN25F40
Eon EN25F80
Eon EN25F16
Eon EN25F32
Intel 28F001BX-B
Intel 28F001BX-T
Intel 82802AB
Intel 82802AC
Macronix MX25L1635D
Macronix MX25L3235D
Macronix MX25L6405
Macronix MX25L12805
Macronix MX29F001B
Macronix MX29F001T
Macronix MX29LV040

Added new chips (according to datasheets):
Eon EN25B05T
Eon EN25B10T
Eon EN25B20T
Eon EN25B40T
Eon EN25B80T
Eon EN25B16T
Eon EN25B32T
Eon EN25B64T

Added minor Device IDs for Eon EN25Bxx{T,B} chips.

Corresponding to flashrom svn r843.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Rule of thumb: Diagnostic programmer init messages are msg_pdbg, all
other debug stuff (except warnings, which should be pmsg_pinfo or
msg_perr) is msg_pspew.

This makes "flashrom -p dummy -V" output a whole lot more readable
(try it!). In case someone wants the full barfed output, it is
possible to specify -VV instead of -V.

Corresponding to flashrom svn r842.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

The msg_* macros won't compile as is if you use more than one parameter
(i.e.

have a format string and a variable). There are two alternative styles:
GNU or C99 variadic macros. While C99 has limitations compared to the
GNU extensions, these limitations do not affect our macros, so I decided
to go with the standard way.

I adjusted whitespace a bit to have aligned values (cosmetic change).

Corresponding to flashrom svn r841.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

This allows us to have one common probe_jedec function instead of half a
dozen wrappers. The trick here is to have FEATURE_ADDR_FULL==0 and thus
default to unmasked addresses. That way, we only have to annotate chips
which need small address masks.

Corresponding to flashrom svn r840.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

All functions which just call probe_jedec and then map flash registers
are replaced by probe_jedec. All functions which call probe_jedec, map
flash registers and do something else can at least eliminate mapping
flash registers.
Fix logic inversion in probe_jedec to map flash registers on success
instead of on failure.
Change a few TIMING_IGNORED to TIMING_FIXME where probe_jedec is used.

Total savings: One probe function simplified, three probe functions
eliminated.

Corresponding to flashrom svn r839.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Corresponding to flashrom svn r838.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

- Add eraseblock definitions
- Use correct eraseblock sizes (the datasheet is a bit ambiguous)
- Use correct probe function
- Fill in probe timing

There is a lot more stuff left to clean up, but at least probe and erase
should work now.

Corresponding to flashrom svn r837.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

It also changes so -VV will spit out highly verbose messages for
debugging. This is a minimal patch to lessen impact a later patch will
convert current printf messages to the new interface.

Add file that was suppose to be committed with r835.

Corresponding to flashrom svn r836.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

It also changes so -VV will spit out highly verbose messages for
debugging. This is a minimal patch to lessen impact a later patch will
convert current printf messages to the new interface.

Corresponding to flashrom svn r835.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Programmer debug messages during programmer init/shutdown are useful
because they print hardware settings and desired configuration.

They help in getting a quick overview of hardware and software state on
startup and shutdown.

Programmer debug messages during flash chip access are mostly a
distraction in logs and should only be enabled if someone is having
problems which are suspected to stem from a programmer hardware or
programmer software bug. Disable those messages by default, they can be
reenabled by #define COMM_DEBUG in the affected programmer file.

An added benefit is a tremendous size reduction in verbose
probe/read/write/erase logs because only flash chip driver messages
remain. In some cases, logs will shrink from 65 MB to 10 kB or less.

The right(tm) fix would be two different debug levels (DEBUG and SPEW)
and the ability to differentiate between programmer debug messages and
flash chip debug messages. Until the design for the message printing
infrastructure is finished, this is the best stop-gap measure we can
get.

Corresponding to flashrom svn r834.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audioahcked@gmail.com>

And rename them accordingly. For now, main() just calls cli_classic(),
but alternative frontends can be switched in main().
Annotate remaining help texts with CLI dependency inside flashrom.c with
a FIXME comment.

Now people can go and create different frontends and be happy. Please
note that any other frontend will have to sort of duplicate the probing
code in cli_classic.c. Refactoring that part of the code is possible,
but not easy because we still want to print instructive help messages
for users.

Corresponding to flashrom svn r833.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>

Corresponding to flashrom svn r832.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

- replace the hand written serial input flush routine with the termios one.
- serialport_discard_read isn't necessary anymore - it just wrapped
  sp_flush_incoming with no extra value.
- serialport_read and serialport_write would misbehave if read or write
  didn't process everything in one go.
- sp_flush_incoming should be #define'd out for FAKE_COMMUNICATION like
  serialport_discard_read was

Corresponding to flashrom svn r831.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>

While at it, also rename a few functions to make it obvious
that they are generic and not specific to the Bus Pirate.

Corresponding to flashrom svn r830.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>