Quick-Start.md

@@ -14,6 +14,10 @@ git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-too
 git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-tooling/prjtrellis
 git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-tooling/ghdl
 git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-tooling/ghdl-yosys-plugin
+cd nextpnr
+git submodule init
+git submodule update
+cd ../
 cd prjtrellis
 git submodule init
 git submodule update
@@ -85,6 +89,8 @@ git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-lit
 git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-litex/pythondata-peripheral-simplertc
 git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-litex/pythondata-peripheral-swiftfsi
 git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-litex/pythondata-peripheral-tercelspi
+
+git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-firmware/bare-metal-firmware
 ```
 
 **Install all packages**
@@ -95,7 +101,7 @@ git clone https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-lit
 
 ```
 cd ../litex-boards/litex_boards/targets
-./versa_ecp5.py --device=LFE5UM --cpu-type=microwatt --cpu-variant=standard+ghdl --with-ethernet --build
+./versa_ecp5.py --device=LFE5UM --cpu-type=microwatt --cpu-variant=standard+ghdl+irq --with-ethernet --build
 ```
 
 **Program Versa board**
@@ -115,7 +121,10 @@ Interact with serial console of bootloader using the special-purpose LiteX debug
 **Build firmware image**
 
 ```
-cd firmware
+cd bare-metal-firmware
+mkdir build
+cd build
+cmake ..
 make
 cd ../
 ```
@@ -123,6 +132,6 @@ cd ../
 **Upload firmware to SoC**
 
 ```
-python3 ../../../litex/litex/tools/litex_term.py --speed 115200 /dev/ttyUSB0 --kernel firmware/firmware.bin
+python3 ../../../litex/litex/tools/litex_term.py --speed 115200 /dev/ttyUSB0 --kernel bare-metal-firmware/firmware.bin
 reboot
 ```
\ No newline at end of file