- 15 Mar, 2020 4 commits
-
-
Evan Lojewski authored
Signed-off-by: Evan Lojewski <github@meklort.com>
-
Raptor Engineering Development Team authored
-
Timothy Pearson authored
-
Timothy Pearson authored
-
- 29 Nov, 2018 1 commit
-
-
Timothy Pearson authored
-
- 17 Nov, 2017 1 commit
-
-
Timothy Pearson authored
Properly disable WDT
-
- 29 Sep, 2017 1 commit
-
-
pkubaj authored
-
- 27 Aug, 2017 2 commits
-
-
Timothy Pearson authored
Read and write tested on ASUS KGPE-D16 with ASMB4 BMC module installed. Change-Id: I4b4e3673f7019f38a3b6ab2f7002bbe56dc6de07 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
-
Timothy Pearson authored
All possible (three) Flash devices are supported with the programmer- specific parameter spibus=<n>. The AST2050 device is compatible with this driver. Read and write tested on ASUS KGPE-D16 with ASMB4 BMC module installed. Change-Id: I5b17061a7f308eabe50d87127311dc88cc96e16c Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
-
- 02 May, 2017 5 commits
-
-
Timothy Pearson authored
Change-Id: I94bee2832469d2df399a09e2f535a107edaec3e7 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
-
Timothy Pearson authored
Change-Id: I292e12d92cdf3961b8d47492a1d5679ff1ea21ce Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
-
Timothy Pearson authored
All possible (five) Flash devices are supported with the programmer- specific parameter spibus=<n>, along with a special setting spibus=host to access the dedicated SPI controller (often used for the host BIOS). Change-Id: I3d49c73b6f5da97af23cace89759923265c256dc Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
-
Timothy Pearson authored
PowerPC systems have the ability to map 32-bit BARs into 64-bit host windows. Reading the BAR directly from the hardware is insufficient on these machines; use the libpci deb->base_addr[x] mechanism instead. Change-Id: I7a37ae98f54aab62e0937985220d1dcd097109f3 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
-
Boris Baykov authored
https://patchwork.coreboot.org/patch/4459 https://patchwork.coreboot.org/patch/4461 https://patchwork.coreboot.org/patch/4463 https://patchwork.coreboot.org/patch/4460 https://patchwork.coreboot.org/patch/4464 https://patchwork.coreboot.org/patch/4462 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Change-Id: I2b69a7a537726349742edc3a00054c39b732ac36
-
- 04 Dec, 2016 1 commit
-
-
Stefan Tauner authored
- Drop support for Subversion in the getrevision script and Makefile. - Add .gitignore and .gitattributes file (the latter to limit exports). - Restore modification dates of the exported files from the SCM. - Stop exporting SCM log dumps to CHANGELOG. This makes no sense. - Remove djgpp-dos target (it is not different to other x-compilations). - Do not export the pre-"compiled" manpage. It can be generated like anything else from the code dump when we export the respective variable. The latter is added with this change. - Add some initial client-side git hooks * When committing check for obvious stuff you never want anyway: - white space errors - duplicate sign-offs * When pushing to the upstream repository check mandatory rules: - existing signoffs and acks in all new commits - no deletions or creation of branches - do not rewrite history of the precious branches, even if forced - Change version string of flashrom as follows. Previously, we included the last stable version according to a hard- coded string in the Makefile and appended the subversion revision number. With this patch the version string includes the last reachable git tag, number of commits since said tag in the upstream branches (if any), the name of said upstream branch, number of commits since that branch (if any), and the shortened git hash. In case there are uncommitted changes a "-dirty" indicator is also added. The case of unknown versions is explicitly handled in getrevision instead of simply appending "-unknown" to a hardcoded release number. The version information is either taken from an existing git remote pointing to an upstream repository (or a known mirror), or if that is not available - with the user's consent - a shadow copy is fetched from the upstream repo that is updated on every build (usually takes less than a second). In the following some examples of the version string changes are shown. Basically we print the distance to the last known upstream tag, which comprises any upstream commits since that tag as well as local commits on top of that. Additionally we handle upstream's stable and staging branches specially. Old output: flashrom v0.9.7-r1716 on Linux 3.8.0-6-generic (x86_64) New output variants: Build of the 0.9.99 release without any changes: flashrom v0.9.99-e4f6643 on Linux 3.13.0-76-generic (x86_64) 5 commits since last tag in upstream's stable branch: flashrom v0.9.99-5-stable-e4f6643-dirty on Linux 3.13.0-76-generic (x86_64) 3 commits since last tag in upstream's staging branch and 4 local commits on top of that: flashrom v0.9.99-3-staging-4-e4f6643 on Linux 3.13.0-76-generic (x86_64) 3 commits since last tag in upstream's staging branch and 4 local commits on top of that, and some local uncommitted changes too: flashrom v0.9.99-3-staging-4-e4f6643-dirty on Linux 3.13.0-76-generic (x86_64) 3 commits since the last tag in an unrelated upstream branch (e.g., a stable release *branch* such as 0.9.99.x) or local branch: flashrom v0.9.99-3-e4f6643 on Linux 3.13.0-76-generic (x86_64) No tags reachable from current commit (generic git fallback): flashrom d95935a version on Linux 3.13.0-76-generic (x86_64) Not in a repository: flashrom unknown version on Linux 3.13.0-76-generic (x86_64) Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
- 13 Mar, 2016 5 commits
-
-
Stefan Tauner authored
Corresponding to flashrom svn r1954. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
-
Carl-Daniel Hailfinger authored
An internal security audit of the flashrom project by Carl-Daniel Hailfinger found a buffer overflow bug present in all flashrom versions since the year 2005. This bug was independently found and reported to flashrom.org by Cosmin Gorgovan a few days ago. A buffer on the stack and a buffer on the heap are affected by the overflow caused by an incorrect fscanf format string. The buffer overflow can only be triggered if the optional layout feature is used and if the user manually specifies a specially crafted layout file on the command line. Command line parsing and flash image handling do not trigger the buggy code path. Most usage of flashrom does not involve layout files. The fix in this commit (changed fscanf format string) can be applied to layout.c of all past flashrom versions. Corresponding to flashrom svn r1953. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
Carl-Daniel Hailfinger authored
Implement serial port shutdown both for regular termination and error conditions in pony_spi. Corresponding to flashrom svn r1952. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
Stefan Tauner authored
Tested mainboards: OK: - ASRock Fatal1ty 970 Performance and P4i65G Reported by anonymous email message ID: 932677687262b1300eaf14260999d9262c31@guerrillamail.com The latter actually had a tested board enable already. Flash chips: - Eon EN25Q128 to PREW (+PREW) Reported by Adrian Graham - GigaDevice GD25VQ41B to PREW (+PREW) Reported by David Hendricks - Winbond W39V040FB to PREW (+EW) Reported by fjed on IRC Miscellaneous: - Change PCI IDs of "MS-6577 (Xenon)" board enable. The previous IDs contained the on-board display adapter which is disabled when a dedicated graphics card is installed. - Add a note to the README how to overcome the clang warning if only a single programmer is enabled. - Fix some typo and manpage problems found by lintian - r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG). This patch corrects that. - Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable. Previous PCI IDs were board-specific but ot the other of devices that could be disabled by the firmware or that vary among hardware revions. There are no good alternatives available. However, since we always have a DMI decoder available now, we can use non-board-specific devices without taking risks. Thanks to Uwe Hermann for reporting and testing. - Some other small changes to clean up whitespace and fix some warnings from Debian's lintian. Corresponding to flashrom svn r1951. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
-
Stefan Tauner authored
This came up when I was testing if building on SunOS still works on the buildbot's instance of OmniOS r151014 which is based on illumos. The fix is - to link against libnsl - a small C type fix in ich_descriptor_tool Corresponding to flashrom svn r1950. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
-
- 12 Mar, 2016 1 commit
-
-
Carl-Daniel Hailfinger authored
Specifying spispeed=reserved as programmer parameter resulted in selecting the default SPI speed instead of aborting. Rewrite the logic to be more readable. Corresponding to flashrom svn r1949. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
- 06 Mar, 2016 2 commits
-
-
Stefan Tauner authored
Corresponding to flashrom svn r1948. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
-
Hatim Kanchwala authored
Corresponding to flashrom svn r1947. Signed-off-by: Hatim Kanchwala <hatim@hatimak.me> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
- 28 Feb, 2016 2 commits
-
-
Carl-Daniel Hailfinger authored
Allow mstarddc_spi and pony_spi on Android. Allow mstarddc_spi and pony_spi on architectures with unsupported raw access. Corresponding to flashrom svn r1946. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
Stefan Tauner authored
Apparently, there is at least one board of Russian origin (coined SPI_TT LPT) that works with SPI Tiny Tools which is a closed-source Windows GUI program somewhat similar to flashrom. Corresponding to flashrom svn r1945. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
- 26 Feb, 2016 1 commit
-
-
Stefan Tauner authored
All credit for this should be given to Patrick Georgi (see r1869). Corresponding to flashrom svn r1944. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
-
- 25 Feb, 2016 1 commit
-
-
Carl-Daniel Hailfinger authored
Only hardware not needing raw access (PCI, memory, port I/O) is supported. Corresponding to flashrom svn r1943. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
- 22 Feb, 2016 2 commits
-
-
Stefan Tauner authored
Even though there is currently only one USB device ID in the wild using our standard way to define the devices creates nicer output for -L and -z. Corresponding to flashrom svn r1942. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
-
Stefan Tauner authored
Even though there is currently only one USB device ID in the wild using our standard way to define the devices creates nicer output for -L and -z. Corresponding to flashrom svn r1941. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
-
- 21 Feb, 2016 3 commits
-
-
Stefan Tauner authored
Corresponding to flashrom svn r1939. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com>
-
Stefan Tauner authored
The atapromise module uses the rom_size field of the struct pci_dev found in pci.h that does not exist in libpayload's implementation and thus does not compile with libpayload. Corresponding to flashrom svn r1938. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
Hatim Kanchwala authored
Corresponding to flashrom svn r1937. Signed-off-by: Hatim Kanchwala <hatim@hatimak.me> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
- 20 Feb, 2016 5 commits
-
-
Carl-Daniel Hailfinger authored
This is especially helpful for compile tests with CONFIG_EVERYTHING=yes, but can also be used without CONFIG_EVERYTHING. Usage: make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no Corresponding to flashrom svn r1936. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
Carl-Daniel Hailfinger authored
We do not support PCI port I/O on non-x86 (yet). Atapromise needs PCI port I/O. Corresponding to flashrom svn r1935. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
Carl-Daniel Hailfinger authored
CONFIG_RAYER_SPI only needs raw hardware access, but not libpci. Disable CONFIG_RAYER_SPI on Android because of missing inb/outb. Introduce NEED_RAW_ACCESS for raw memory access, PCI port I/O and MSR access. Corresponding to flashrom svn r1934. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
Stefan Tauner authored
The solution was discovered in a collaborative bug hunt with testing done by David Hendricks. The actual culprit was found by Urja Rannikko by comparing vanilla flashrom with David's version in chromiumos. Corresponding to flashrom svn r1933. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: David Hendricks <dhendrix@chromium.org> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-
Stefan Tauner authored
This won't make raw I/O work magically but at least it would provide iopl() if some driver requires it and there is no better alternative currently. Corresponding to flashrom svn r1932. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
-
- 19 Feb, 2016 1 commit
-
-
Stefan Tauner authored
Command line arguments given when executing make should not stop us from setting commonly user-configurable variables like CPPFLAGS or LDFLAGS. Without this patch 'make CPPFLAGS="-Ifail"' would fail to find libusb1 headers and abort. Add override statements where we append mandatory options to these variables to make (Debian) packagers more happy. Also, r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG). This patch corrects that as well. Corresponding to flashrom svn r1931. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
-
- 18 Feb, 2016 2 commits
-
-
Carl-Daniel Hailfinger authored
The current code is checking model_id to remember if a chip has already been limited, but if flashchips.c contains two subsequent chips with different vendor_id but identical model_id the adjustment will not be done. Switch to checking the chip size instead. If a chip has multiple whole-chip erase functions, only one will be modified. Fix that. Corresponding to flashrom svn r1930. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Acked-by: Urja Rannikko <urjaman@gmail.com>
-
Nico Huber authored
This patch is based on Nico Huber's original version that was rebased by David Hendricks for Chromium OS in Change-Id: I84384b9d8ed53911657cf2293733531a6e11fd23 Corresponding to flashrom svn r1929. Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-