GitLab

Tested mainboards:
OK:
 - ASRock Fatal1ty 970 Performance and P4i65G
   Reported by anonymous email message ID:
   932677687262b1300eaf14260999d9262c31@guerrillamail.com
   The latter actually had a tested board enable already.

Flash chips:
 - Eon EN25Q128 to PREW (+PREW)
   Reported by Adrian Graham
 - GigaDevice GD25VQ41B to PREW (+PREW)
   Reported by David Hendricks
 - Winbond W39V040FB to PREW (+EW)
   Reported by fjed on IRC

Miscellaneous:
 - Change PCI IDs of "MS-6577 (Xenon)" board enable.
   The previous IDs contained the on-board display adapter which is
   disabled when a dedicated graphics card is installed.
 - Add a note to the README how to overcome the clang warning if only a
   single programmer is enabled.
 - Fix some typo and manpage problems found by lintian
 - r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG).
   This patch corrects that.
 - Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable.
   Previous PCI IDs were board-specific but ot the other of devices
   that could be disabled by the firmware or that vary among
   hardware revions. There are no good alternatives available.
   However, since we always have a DMI decoder available now, we can
   use non-board-specific devices without taking risks. Thanks to
   Uwe Hermann for reporting and testing.
 - Some other small changes to clean up whitespace and fix some warnings
   from Debian's lintian.

Corresponding to flashrom svn r1951.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested mainboards:
OK:
 - ASRock G31M-GS
   Reported by Александр Трубицын
 - ASRock G41M-VS3
   Reported by Александр Трубицын
 - ASRock N68C-S UCC
   Reported by Alexey Belyaev
 - ASRock AMCP7AION-HT (ION 330HT(-BD))
   Reported by Stefan Tauner
 - ASUS P5K SE
   Reported by Александр Трубицын
 - ASUS P5KPL-VM
   Reported by Marin Vlah
 - ASUS RAMPAGE III GENE
   Reported by stevessss on IRC
 - GIGABYTE GA-945GM-S2
   Reported by Александр Трубицын
 - GIGABYTE GA-945GCM-S2 (rev. 3.0)
   Reported by Александр Трубицын
 - GIGABYTE GA-965P-S3
   Reported by Александр Трубицын
 - GIGABYTE GA-EG43M-S2H
   Reported by Александр Трубицын
 - GIGABYTE GA-EP31-DS3L (rev. 1.0)
   Reported by Александр Трубицын
 - GIGABYTE GA-G33M-S2
   Reported by Александр Трубицын
 - GIGABYTE GA-G33M-S2L
   Reported by Александр Трубицын
 - GIGABYTE GA-H55M-S2
   Reported by Александр Трубицын
 - GIGABYTE GA-J1900N-D3V
   Reported by Marcos Truchado and Guillermo von Hünefeld
 - GIGABYTE GA-K8NS
   Reported  by nicolae788
 - GIGABYTE GA-M56S-S3
   Reported by Estevo Paz Freire
 - GIGABYTE GA-P31-DS3L
   Reported by Александр Трубицын
 - GIGABYTE GA-P31-S3G
   Reported by Александр Трубицын
 - MSI MS-7336
   Reported by Benjamin Bellec
 - MSI X79A-GD45 (8D) (MS-7760)"
   Reported by mortehu on IRC
 - Supermicro A1SAi-2550F
   Reported by Bernard Grymonpon
 - Supermicro X7DWT
   Reported by Steven Stremciuc

Laptop:
 - ASUS U38N
   Reported by Ultra on IRC
 - Dell Latitude D630
   Reported by Márton Miklós
 - Fujitsu Amilo Xi 3650
   Reported by Elmar Stellnberger
 - Lenovo T400 (whitelisting only)

Chipsets:
 - Mark 8086:1f38 (Intel Avoton/Rangeley) as tested
   Reported by Jeremy Porter and Bernard Grymonpon
 - Add Intel Sunrise Point IDs but no support yet.

Flash chips:
 - Atmel AT45DB321D to PREW (+PREW)
   Reported by The Raven
 - Eon EN25QH32 to PREW (+PREW)
   Reported by Josua Mayer
 - Eon EN25QH64 to PREW (+EW)
   Reported by David s. Alessio
 - GigaDevice GD25LQ64(B) to PREW (+PREW)
   Reported by Greg Tippit
 - Intel 28F001BN/BX-T to PREW (+EW)
   Reported by Lu Xie
 - Micron M25P10-A to PREW (+W)
   Reported by the Raven
 - Micron M25PE40
   Reported by David Wood
 - Micron N25Q128..3E to PREW (+PREW)
   Reported by Miklós Márton
 - Macronix MX25L3273E to PREW (+PREW)
   Reported by Roklobsta on IRC
 - Macronix MX23L6454 to PR (+PR)
   Reported by Steven Honeyman
 - Macronix MX25U6435E/F to PREW (+PREW)
   Reported by Marcos Truchado and Guillermo von Hünefeld
 - PMC Pm25LQ032C to PREW (+EW)
   Reported by Dirk Knop
 - Spansion S25FL016A to PREW (+EW)
   Reported by Márton Miklós
 - Spansion S25FL128S......0 to PREW (+PREW)
   Reported by Jim Houston
 - Spansion S25FL204K to PR (+PR)
   Reported by Thomas Debrunner
 - SST SST49LF016C to PREW (+EW)
   Reported by Steven Stremciuc
 - SST SST39VF040 to PREW (+PREW)
   Reported by Xavier Bourgeois
 - SST SST49LF040B to PREW (+EW)
   Reported by Rikard Åhlund
 - ST M25P10-A to PREW (+W)
   Reported by Martijn Schiedon
 - Winbond W39V040FA to PREW (+EW)
   Reported by Евгений Черкашин
 - Winbond W39V080FA to PREW (+EW)
   Reported by protagonist0 on IRC
 - Winbond W25Q80.W to PREW (+PREW)
   Reported by Miklós Márton
 - Winbond W25X64 to PREW (+REW)
   Reported by Johannes Krampf and Manuel Dejonghe
 - Fix ID of AMIC A25LQ64
   Reported by Roman Titov
 - Fix page size of Spansion S25FL129P......1
   Copy and paste error from the 128S uniform 256kB variant, probably.
 - Add Micron/Numonyx phase-change memory IDs

Miscellaneous:
 - Detect Android target OS.
   No changes are required to build flashrom (excluding programmers
   with NEED_PCI) on Android.
 - Update rayerspi (spipgm) URL
 - Fix max_data_write handling of at45db.
 - Minor refinement of the README
 - Mark board enable for the GA-K8NS variants as tested.
   Tested by "nicolae788" on a board with socket 754.
 - Mark "Multi-system" chassis as non-laptop case.
 - Remove W836xx log requests.
   We got enough (and no one is looking at them for the time being anyway).
 - serprog: improve invalid reply error message, contributed by Urja Rannikko.
 - Remove default include paths for MinGW.
 - Disable implicit rules in the Makefile because we don't need them and they
   just make the build (imperceptibly) slower.
 - Enable our own strnlen() implementation not only on DJGPP but also if
   HAVE_STRNLEN is not defined. This is needed to get older BSDs
   (e.g. NetBSD 6.0, FreeBSD < 8.0) to work.
 - Tiny other stuff.

Corresponding to flashrom svn r1917.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

 - /usr/include/cpu/param.h defines PAGE_MASK already, hence use another
   name for the respective macro in nicintel_eeprom.c.
 - Since DragonflyBSD 3.6 DPorts is used as the default package manager.
   Therefore we should use /usr/local/ instead of /usr/pkg/ on default
   to fetch libraries.

Corresponding to flashrom svn r1866.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Gets rid of a few DOS-specific Makefile hacks.

Corresponding to flashrom svn r1863.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Make it easier to compile flashrom under NetBSD and DragonFlyBSD:
 - Use /usr/pkg/ as prefix for includes and linking
 - Use pciutils as include path for the right(tm) libpci

Also, fix date handling in getrevision.sh to work with the various formats for
invoking 'date'. This also uses svn's info --xml output instead of the regular one.

Corresponding to flashrom svn r1742.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This allows to use the DOS library trees stored in a user-specified directory.

I have mirrored the needed patches, sources and binaries (the latter
are properly licensed to allow that) in the flashrom wiki, so use those
URLs instead of the original sources.

Corresponding to flashrom svn r1734.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Adds support for the Altera USB-Blaster programming dongle in Active
Serial (AS) mode. Tested on both original product and a clone dongle.

Corresponding to flashrom svn r1658.
Signed-off-by: James Laird <jhl@mafipulation.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Move Mac OS X IOKit/DirectHW availability checks in the Makefile from
compiler check to pciutils check.

Print the compiler error messages for feature detection.

Add DOS libpci in the Makefile includes only if a PCI-based programmer
was requested.

Restrict mmap usage in ich_descriptors_tool to Unix style systems.

Build ich_descriptors_tool with the correct .exe extension on
DOS/Windows.

Build ich_descriptors_tool by default on x86. (Patch by Stefan Tauner)

Print the Windows version instead of "unknown machine" on Windows.

Don't #define our own __DARWIN__, use the standard OS X detection
method.

Update the README.

Add more generated files to svn:ignore

Corresponding to flashrom svn r1567.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add -I/usr/pkg/include to NetBSD/Dragon Fly build example CPPFLAGS.
This is needed to pick up libftdi.

Corresponding to flashrom svn r1519.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

CONFIG_BITBANG_SPI was not selected if CONFIG_NICINTEL_SPI was on by default.
Wiki output was missing all flash chips if CONFIG_INTERNAL was not
selected.
Use correct type for toupper()/tolower()/isspace() functions.
Specify software requirements in a generic way.
Non-x86 compilation does not work with the default programmer set, so
list the make parameters which result in a working build.

Corresponding to flashrom svn r1203.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

The Direct I/O library for Mac OS X is now called DirectHW to make sure
people can find it via an internet search.

DirectIO was a generic name for a concept and thus not a good
distinguisher for a library.

Corresponding to flashrom svn r1198.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Update README to list all the needed rpm files for DOS cross-compilation
and update the download location of cwsdpmi.

Corresponding to flashrom svn r1186.
Signed-off-by: Idwer Vollering <vidwer+flashrom@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Add a requirements section to the man page which lists the needed access
permissions for each programmer.

This feature needs my pciutils/libpci 8/16-bit write emulation patch at
http://marc.info/?l=openbsd-ports&m=127780030728045

 titled
[PATCH] Fix pciutils non-32bit PCI write on OpenBSD

Corresponding to flashrom svn r1067.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stuart Henderson <sthen@openbsd.org>

- Force chip read by faking probe success.
- Force chip access even if the chip is bigger than max decode size for
  the flash bus.
- Force erase even if erase is known bad.
- Force write even if write is known bad.
- Force writing even if cbtable tells us that this is the wrong image
  for this board.

This patch cleans up --force usage:
- Remove any suggestions to use --force for probe/read from flashrom
  output.
- Don't talk about "success" or "Found chip" if the chip is forced.
- Add a new internal programmer parameter boardmismatch=force. This
  overrides any mismatch detection from cbtable/image comparisons.
- Add a new internal programmer parameter laptop=force_I_want_a_brick.
- Adjust the documentation for --force.
- Clean up the man page a bit whereever it talks about --force or
  laptops.

Additional changes in this patch:
- Add warnings about laptops to the documentation.
- Abort if a laptop is detected. Can be overridden with the programmer
parameter mentioned above.
- Add "Portable" to the list of DMI strings indicating laptops.
- Check if a chip specified with -c is known to flashrom.
- Programmer parameter reliability and consistency fixes.
- More paranoid self-checks.
- Improve documentation.

Corresponding to flashrom svn r996.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

 - Fix a number of typos (found via ispell).

 - Use correct vendor names (as per their websites) consistently.

Corresponding to flashrom svn r985.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Add a README with build instructions.

Corresponding to flashrom svn r963.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Rudolf Marek <r.marek@assembler.cz>

Cast input to tolower() to unsigned char to work around how tolower() is
implemented on NetBSD.

Also, use CPPFLAGS (rather than overriding CFLAGS) for the
NetBSD/DragonFly build example.

Corresponding to flashrom svn r905.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Corresponding to flashrom svn r838.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Drop usage information that is already mentioned in the man page.

Corresponding to flashrom svn r827.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

So far, the only case where libz is needed is when a library (libpci)
pulls in libz and even then it only happens if libpci is available in a
static version only and said static version has libz requirements.

Check for libpci separately and don't require libz if it isn't needed.

Clarify the README.

Corresponding to flashrom svn r743.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r700.
Signed-off-by: Joerg Mayer <jmayer@loplof.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Don't mention coreboot.org without context.

Corresponding to flashrom svn r688.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r686.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Change all occurences in the source code and documentation accordingly.

Corresponding to flashrom svn r669.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

In particular, it should no longer be necessary to patch the makefile
for hassle-free compilation.

The targets are:
make export
make tarball
Both preserve svn revisions and the exported tree does not depend on
subversion in any way or shape.

Documentation for this feature has been added to README.

We need this for five reasons:
1. Packagers currently have to patch flashrom source to compile it on
systems without subversion. We should make it easier for them.
2. Snapshot tarballs currently have a .svn 1.5 directory included but
this will cause errors for users with older svn 1.4. Not requiring
subversion for snapshot compilation is best.
3. Since packagers seldom the svn revision in their fixup patches, some
packages out there have incorrect or no revision, only major version
numbers.
4. Releasing a new version of flashrom needs too many changes to the
makefile which have to be reverted instantly after the release. That is
unnecessary churn.
5. Making a release is easy with the change. Update the major version,
then run "make tarball".

Corresponding to flashrom svn r587.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>  
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

I finally found the machine (doesn't belong to me) where I originally tested
this board as non-working and I can confirm that all operations work fine now
(since the nForce2 patch in r548).

Corresponding to flashrom svn r571.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Add explicit installation instructions in the README.

 - Code cleanups, coding style fixes, drop dead code.

 - Drop duplicate board listings from -L output (some boards were explicitly
   recorded in boards_ok[] _and_ implicitly via the board-enables table.

 - Add MS-xxxx numbers to MSI boards where we can find that info.

 - Fix typo, "K8T Neo2" should have been "K8T Neo2-F" actually, at least
   according to the comment of w83627thf_gpio4_4_raise_2e() which says
   "Suited for: MSI K8T Neo2-F".

Corresponding to flashrom svn r554.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r544.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r535.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Also, move more stuff to the manpage where it belongs (this also
eliminates some duplicated contents).

Corresponding to flashrom svn r460.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r453.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>

Fix compilation on Solaris and tell people how to compile flashrom on
Solaris, Darwin/Mac OS X and DragonFly BSD.

Thanks to Joerg Schilling and Patrick Georgi for the Solaris part.

Corresponding to flashrom svn r452.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r451.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Also, additional small cosmetic fix.

Corresponding to flashrom svn r440 and coreboot v2 svn r4196.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r433 and coreboot v2 svn r4141.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r427 and coreboot v2 svn r4092.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Improve description a bit, especially wrt chip packages and
   protocols.

 - Add some missing parameters to manpage option descriptions.

 - Remove long obsolete DoC support note.

Corresponding to flashrom svn r425 and coreboot v2 svn r4088.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r402 and coreboot v2 svn r3908.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ward Vandewege <ward@gnu.org>

Mimicked from flashrom.c

Corresponding to flashrom svn r377 and coreboot v2 svn r3855.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r271 and coreboot v2 svn r3385.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>