GitLab

Corresponding to flashrom svn r1332.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

- add support for Olimex' ARM-USB-TINY, ARM-USB-TINY-H, ARM-USB-OCD
AND ARM-USB-OCD-H and adjust man page - minor string change ("First
International Computer, Inc." -> "FIC")

Corresponding to flashrom svn r1331.
Signed-off-by: Pete Batard <pbatard@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1330.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1329.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

 - introduce offset macros and use them to (re)define the existing mask macros
 - fix masks of SSFC_COP, SSFC_DBC, SSFC_SCF (were single-bit masks erroneously)
 - add comments
 - rename SSFS_CDS to SSFS_FDONE (abbr. used in datasheet; not in SSFS but HSFS)
 - use those for refactoring and magic number elemination.

 following patch uses them for pretty printing.

Corresponding to flashrom svn r1328.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested-by: Melroy van den Berg
http://www.flashrom.org/pipermail/flashrom/2010-December/005642.html



Corresponding to flashrom svn r1327.

Based on reverse engineering by Michael Karcher.
Signed-off-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>

CONFIG_INTERNAL implies Super I/O support and NEED_PCI.
NEED_PCI is only used to guard PCI stuff which may be needed for
external PCI-based programmers. That way, using #if NEED_PCI can be
avoided inside #if CONFIG_INTERNAL.

Corresponding to flashrom svn r1326.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Original report:
http://www.flashrom.org/pipermail/flashrom/2011-May/006594.html

Manufacturer's page:
http://msi.com/product/mb/G31TM-P21.html



Corresponding to flashrom svn r1325.
Tested-by: Peter Lemenkov <lemenkov@gmail.com>
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

- mark chipset enable for QS57 as OK
  (my thinkpad)

- mark MSI G31M3-L(S) V2 (MS-7529) as OK
  http://www.flashrom.org/pipermail/flashrom/2011-June/006634.html

- mark AT49BV512 as fully tested
  http://www.flashrom.org/pipermail/flashrom/2011-June/006609.html
- mark MX25L4005 as fully tested
  http://www.flashrom.org/pipermail/flashrom/2011-June/006634.html
- mark SST49LF020 as fully tested
  http://www.flashrom.org/pipermail/flashrom/2011-May/006570.html
- mark SST25VF064C as fully tested
  http://www.flashrom.org/pipermail/flashrom/2011-May/006586.html
- mark W25x16 as fully tested
  http://www.flashrom.org/pipermail/flashrom/2011-June/006605.html



Corresponding to flashrom svn r1324.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1323.
Signed-off-by: Steven Zakulec <spzakulec@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Peter Stuge <peter@stuge.se>

There was one line break added too much in the previous commit, sorry.
the probing functions need to output at least one '\n' for satisfactory output.
that means even in error cases they have to do that.
OTOH they should not output a sequence of "\n\n" because
it would distort the verbose probing output with empty lines.

Corresponding to flashrom svn r1322.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

- missing spaces in code and output
- improved documentation/naming/output
- missing line breaks in spi probing functions

Corresponding to flashrom svn r1321.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Tested motherboards:
- MSI MS-7599 (870-C45)
  http://www.flashrom.org/pipermail/flashrom/2011-May/006420.html
- Gigabyte GA-P55A-UD4 (rev 1.0)
  http://www.flashrom.org/pipermail/flashrom/2011-May/006415.html
- Supermicro X8DTU-F
  http://www.flashrom.org/pipermail/flashrom/2011-May/006329.html
- Supermicro X8STi
  http://www.flashrom.org/pipermail/flashrom/2011-May/006436.html

tested board enable:
- abit NF-M2 nView
  success report (without a log though): http://www.flashrom.org/pipermail/flashrom/2011-April/006167.html

tested flash chips:
- ST M50FW080 (+EW)
  http://www.flashrom.org/pipermail/flashrom/2011-May/006409.html
- ST M25P32 (+EW)
  http://www.flashrom.org/pipermail/flashrom/2011-May/006398.html
- Winbond W25x64 (+P)
  http://www.flashrom.org/pipermail/flashrom/2011-March/006012.html
- Winbond W39V040FA (+W)
  http://www.flashrom.org/pipermail/flashrom/2010-December/005642.html

new flash chip
- Winbond W25Q128
  http://...

Corresponding to flashrom svn r1319.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Without this the magic numbers need to be kept in sync with the maximum
length of the strings printed in the corresponding column. if not, an
overflow and a nasty ' '-storm occur on executing flashrom -L.

Corresponding to flashrom svn r1318.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This patch combines three previously posted patches in a revised form.
one is even stolen from Stefan Reinauer (remove umlauts from man page).

Corresponding to flashrom svn r1317.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Add lock printing for AMIC A25L05PT, A25L05PU, A25L10PT, A25L10PU,
A25L20PT, A25L20PU, A25L40PT, A25L40PU, A25L80P, A25L16PT, A25L16PU,
A25L512, A25L010, A25L020, A25L040, A25L080, A25L016, A25L032, A25LQ032
to a25.c.

Add lock printing for Atmel AT26DF081A, AT26DF161, AT26DF161A,
AT26DF321.

Move Atmel AT25*/AT26* lock related functions originally added in r1115
from spi25.c to at25.c.

For SPI chips the lock printing was handled by one common function, but
sharing a common function which only is a big switch() statement doesn't
make sense, especially if we can define lock printing functions per
flash chip anyway.

The printlock function pointer in struct flashchip is used to print
status register and locking information, and serves as replacement for
implicit status register and lock printing during probe. That code will
later be changed to store locking info in a machine- accessible data
structure so flashrom can handle locked regions...

Success report: http://www.flashrom.org/pipermail/flashrom/2011-May/006473.html



Corresponding to flashrom svn r1315.
Signed-off-by: John Schmerge <jschmerge@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1314.
Signed-off-by: Shailendra Sodhi <shailendra.sodhi@endace.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Success report:
http://www.flashrom.org/pipermail/flashrom/2010-October/005046.html



Corresponding to flashrom svn r1313.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Success report: http://flashrom.org/pipermail/flashrom/2011-April/006179.html



Corresponding to flashrom svn r1312.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Success report: http://flashrom.org/pipermail/flashrom/2011-April/006179.html



Corresponding to flashrom svn r1311.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Corresponding to flashrom svn r1310.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Peter Stuge <peter@stuge.se>

Success report with MX29F001TPC-12 at:
http://flashrom.org/pipermail/flashrom/2011-April/006132.html



Corresponding to flashrom svn r1309.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

http://www.flashrom.org/pipermail/flashrom/2011-April/006099.html



Corresponding to flashrom svn r1308.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Corresponding to flashrom svn r1307.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Corresponding to flashrom svn r1306.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Corresponding to flashrom svn r1305.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Corresponding to flashrom svn r1304.
Signed-off-by: Raúl Soriano <GatoLoko@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Corresponding to flashrom svn r1303.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>

Corresponding to flashrom svn r1302.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>

Corresponding to flashrom svn r1301.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Corresponding to flashrom svn r1300.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.

Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").

Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r1298.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>

Corresponding to flashrom svn r1297.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Anton Kochkov <anton.kochkov@gmail.com>
Acked-by: Anton Kochkov <anton.kochkov@gmail.com>

r1293 introduced a bug which caused probing to loop at the first found
chip.

Corresponding to flashrom svn r1296.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>

Corresponding to flashrom svn r1295.

Signed-off-by: John Schmerge <jbschmerge@gmail.com> for Devon IT
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Handle board-specific quirks in three phases:
1. Before Super I/O probing (e.g. blacklisting of some Super I/O probes,
or unhiding the Super I/O)
2. Before the laptop enforcement decision (e.g. whitelisting a laptop
for flashing)
3. After chipset enabling (all current board enables)

Implementation note: All entries in board_pciid_enables get an
additional phase parameter. Alternative variants (3 tables instead of 1)
also have their downsides, and I chose table bloat over table
multiplication).

With this patch, it should be possible to whitelist supported laptops
with a matching entry (phase P2) in board_pciid_enables which points to
a function setting laptop_ok=1. (In case DMI is broken, matching might
be a little bit more difficult, but it is still doable.)

Corresponding to flashrom svn r1294.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

This moves 99.5% of the .data section to .rodata (which ends up in .text).

Corresponding to flashrom svn r1293.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>