GitLab

FD37: http://www.coreboot.org/pipermail/flashrom/2010-March/002440.html
K9A2: http://www.coreboot.org/pipermail/flashrom/2010-March/002433.html



Thanks to Sylvain BERTRAND for reporting!

Corresponding to flashrom svn r979.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

W49F002U: http://www.coreboot.org/pipermail/flashrom/2010-March/002469.html
EN29F002: http://www.coreboot.org/pipermail/flashrom/2010-March/002480.html



Block erase was broken, chip erase worked, block erase is fixed in r934 but
has not been tested since.

Thanks to Guy Lacroix for reporting!

Corresponding to flashrom svn r978.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

See http://www.coreboot.org/pipermail/flashrom/2010-March/002501.html


Thanks to Konstantin Matuschek for reporting.

Corresponding to flashrom svn r977.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The Asus A8NE-FM/S does exist, you find original ASUS pdf manuals in the
internet, but seems to be an OEM board that is not documented on the
Asus page.

A lot of MSI boards are OEM boards that have no page at the MSI site...

This patch also adds links in the Wiki for boards from the board enable
table.

Corresponding to flashrom svn r976.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Abit VT6X4 / W29C020C: See
  http://www.coreboot.org/pipermail/flashrom/2010-March/002730.html
  Fixes typo in comment and marks board-enable as tested (the flashrom
  running on that machine was patched with the board enable that got
  in later).

Asus A7V133 / Atmel AT29C010A: See
  http://www.coreboot.org/pipermail/flashrom/2010-March/002729.html


  Adding "erase" to tested as there is only one erase function.

Corresponding to flashrom svn r975.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Lspci/flashrom/superiotool at
http://www.coreboot.org/pipermail/flashrom/2010-March/002579.html



Corresponding to flashrom svn r947.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This board has a supported chipset and a supported bios, but it's
connected indirectly through IT8716 and not recognized.

Corresponding to flashrom svn r935.
Signed-off-by: Raúl Soriano <GatoLoko@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

I have an ASUS A7V8X-X, the BIOS programming requires a write-enable. It
has an IT8712F, just like the A7V600-X.

Corresponding to flashrom svn r929.
Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

We don't need to duplicate OK and NT as PCI_OK and PCI_NT if the symbols
are already there (defined for the chipset enable table).

Corresponding to flashrom svn r911.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

It's disabled by default. The current status is detailed at:
http://www.flashrom.org/pipermail/flashrom/2010-January/001828.html



Corresponding to flashrom svn r908.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The board doesn't need a board-enable, writing works out of the box.

Also, the board can only decode 256KB. I verified this by writing a 512KB
image of random bytes (which fails), whereas 256KB of random bytes can be
written correctly.

Corresponding to flashrom svn r887.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Thanks to Michael Karcher for noticing.

Corresponding to flashrom svn r863.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r801.
Signed-off-by: Zachary O Dillard <teathief@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

 - AsRock K8S8X (reported by Adrian Glaubitz <adrian.glaubitz@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-November/000937.html

 - ASUS K8V-X SE (reported by Adrian Glaubitz <adrian.glaubitz@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-November/000965.html

 - DFI Blood-Iron P35 T2RL (reported by Erno Vaurio <ernovaur@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-November/001059.html



Corresponding to flashrom svn r791.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

To prepare for libflashrom I wanted to make the main loop more readable and more correct and factor out stuff which can be useful in libflashrom.

- Factor out printing of supported devices to print.c.
- Adjust name of wiki printing function to fit the pattern.
- Abort if the user specified --verify and --noverify at the same time.
- Check for extra parameters which don't fit commandline syntax.

Corresponding to flashrom svn r766.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Add a note for ASUS M2N-E.
Change "iff" to "if". Most people don't understand what "iff" means and
the meaning of both words is close enough to hopefully give users the
right idea.

Corresponding to flashrom svn r763.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r750.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - MSI MS-6153 (reported by Uwe Hermann <uwe@hermann-uwe.de>)
   Tested by me on hardware. The board decodes max. 256 KB.

 - MSI MS-6156 (reported by Uwe Hermann <uwe@hermann-uwe.de>)
   Tested by me on hardware. The board decodes max. 256 KB.

Also, fix Dell PowerEdge 1850 name and add some more board URLs.

Corresponding to flashrom svn r749.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r735.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - ASUS M3A78-EM (reported by Christian Heinz <christian.ch.heinz@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-September/000629.html
 
 - MSI MS-7368 (K9AG Neo2-Digital) (reported by Joshua Roys <roysjosh@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-September/000632.html

 - GIGABYTE GA-MA770T-UD3P (reported by Kevin Sopp <baraclese@googlemail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-September/000529.html


   
 - Elitegroup P6VAP-A+
   Tested by Uwe Hermann <uwe@hermann-uwe.de> on hardware. Maximum supported
   chip size in this board is 256 KB.
   
Small changes in print.c were required to adjust for longer board names.

Corresponding to flashrom svn r734.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This is useful for libflashrom (you don't need wiki output in a coreboot
payload).

Wiki output is now disabled by default. If you want to enable it, run
make CONFIG_PRINT_WIKI=yes

Corresponding to flashrom svn r725.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Example make commandline if you want only internal programmers:
make CONFIG_FT2232SPI=no CONFIG_SERPROG=no CONFIG_NIC3COM=no
CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_DUMMY=no

Of course, all of the CONFIG_* symbols can be mixed and matched as
needed. CONFIG_FT2232SPI is special because even if it is enabled, make
will check if the headers are available and skip it otherwise.

Corresponding to flashrom svn r724.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

This is a followup to r705.

Corresponding to flashrom svn r707.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>

Update bad board list and remove boards where either the chipset is
not supported (not a board issue) or where we have no report in the
archives.

Corresponding to flashrom svn r703.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Marked as OK:

 - ASUS A8V Deluxe (reported by Joachim Ernst <Joachim.Ernst@web.de>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000448.html
   Tested with r701.

 - ASUS P5L-MX (reported by Vasiliy Vylegzhanin <6vasia@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000446.html
   Tested with v0.9.0.

 - Abit Fatal1ty F-I90HD (reported by Joachim Ernst <joachim.ernst@web.de>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000435.html

 - Trigem Lomita (reported by Udu Ogah <putlinuxonit@gmail.com>)
   Tested with r695.

 - GIGABYTE GA-MA790GP-DS4H (reported by Ralph Loader <suckfish@ihug.co.nz>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000414.html
   http://www.flashrom.org/pipermail/flashrom/2009-August/000417.html

 - GIGABYTE GA-MA78GPM-DS2H (reported by
                             Erik Haugen Bakke <erik_hb_mlist@yahoo.com.au>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000329.html



Corresponding to flashrom svn r702.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Mark the following boards as OK (no board-enable needed):

 - Tyan S2466 (reported by Oliver Niesner <oli@servebbs.net>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000211.html



Mark the following boards as non-working for now:

 - ASRock K7VT4A+ (reported by Udu Ogah <putlinuxonit@gmail.com>)
   Chipset detect, but no chip.
 
 - ASUS M2N68 (reported by Udu Ogah <putlinuxonit@gmail.com>)
   Chipset detect, but no chip.
 
 - ASUS A7V600-X (reported by Udu Ogah <putlinuxonit@gmail.com>)
   Chipset and chip detected, writes don't work. Board-enable required.

Also, add some missing board URLs and fix incorrect board names.

Corresponding to flashrom svn r695.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r659.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r641.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 
 - Also print URLs of boards with board-enables.
 
 - Mark known-bad operations for chips red in the wiki.
 
 - Clarifiy a wiki message a bit.

Corresponding to flashrom svn r640.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - VIA EPIA-M700 (reported by Jakob Bornecrantz <wallbraker@gmail.com>)
   http://www.coreboot.org/pipermail/coreboot/2009-July/050416.html

 - GIGABYTE GA-EX58-UD4P (reported by Warren Turkal <wt@penguintechs.org>)
   http://www.coreboot.org/pipermail/coreboot/2009-June/050199.html

Mark as non-working:

 - ASUS Eee PC 701 4G (reported by Uwe Hermann <uwe@hermann-uwe.de>)
   There seems to be some SPI flash translation layer, likey done by the
   embedded controller on the laptop (ENE KB3310).
   The BIOS chip in this Eee PC model is Winbond 25X40VSIG btw.
   More info: http://beta.ivancover.com/wiki/index.php/Eee_PC_Research

Mark this chip as tested:

 - ST M25P40 (reported by Jakob Bornecrantz <wallbraker@gmail.com>)
   http://www.coreboot.org/pipermail/coreboot/2009-July/050416.html



Other:

 - Make the "Albatron PM266A" board detection print "Albatron PM266A*" as this
   enable will actually work for other PM266A* boards according to libv.
   However, the code was actually tested on "Albatron PM266A Pro".

 - Add some more board URLs / notes.

 - s/BioStar/Biostar/ as per vendor website.

 - Fix typo in print.c: s/A7V8-MX SE/A7V8X-MX SE/.

Corresponding to flashrom svn r639.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Properly escape '-' chars in manpage.
 
 - Fix typo in chipset_enable.c.

 - Drop useless 'return' in chip_readn().

 - Random other whitespace or cosmetic fixes.

Corresponding to flashrom svn r636.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - ASUS P5KC (reported by Andrei Pavlov <pavlov.andrei@rambler.ru>)
 
 - GIGABYTE GA-EP35-DS3L (reported by Alexander Gordeev <lasaine@lvk.cs.msu.su>)
 
Add a few more URLs.

Corresponding to flashrom svn r627.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Turns out that the GIGABYTE GA-7ZM _does_ work fine if you disable
the BIOS flash protection option _and_ remove jumper JP9 on the board
(d'oh!).

This board can decode 512 KB chips just fine (not just 256 KB).

Corresponding to flashrom svn r618.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Move board_info_url struct to print.c, doesn't have to be global.

 - Simplify flashrom.c a bit by moving stuff to print.c.
   Eliminate two now-useless mini-functions in print.c.

 - Add a note that the wiki page contents are semi-automatically generated.

 - Mention date of last wiki page update as well as the flashrom revision
   that was used to generate the wiki output.

 - Also generate list of supported laptops in -z output now.

 - Add some more board URLs.

 - Add a boards_notes[] table to allow for arbitrary footnotes/comments for
   each board in the table. All notes will automatically be turned into
   wiki footnotes with correct numbers and will appear at the end of the
   respective table.

Corresponding to flashrom svn r615.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Convert #defines for strings in print.c to 'const char *'s.

 - Add missing entries in the board URL tables.

 - Add a few more board URLs, partly contributed by 'Alien' at
   http://www.coreboot.org/index.php?title=flashrom&curid=1765&diff=8626&oldid=8625&rcid=3586



 - Fix sort order of board lists.

 - Add laptops to URL list (not yet used).

 - Fix typo.

 - Fix EPIA-EX15000/NX15000 names (append "G").

Corresponding to flashrom svn r614.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Add a --list-supported-wiki / -z option which outputs the currently
supported flash chips (and their status, size, and type), chipsets (plus
status), mainboards (plus status), and external PCI devices usable as
programmer to stdout.

This allows for very easy pasting into the http://coreboot.org/flashrom


page, so we can keep that page up-to-date without much hassle.

The list of boards is mostly new (known good ones which don't need
write-enable code, and known-bad ones) and also lists URLs to the
vendor's mainboard pages.

Corresponding to flashrom svn r607.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Content taken from current wiki page.

Corresponding to flashrom svn r604.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Drop no longer needed MAX macro, we have a max() function.

Corresponding to flashrom svn r601.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>