Skip to content

GitLab

Switch branch/tag
  1. 24 Dec, 2011 1 commit
    • Stefan Tauner's avatar
      Add ich_descriptor_tool to decode all flash descriptors stored in a flash dump file · b3850964
      Stefan Tauner authored 
      
This patch adds an external utility that shares most of the existing descriptor
decoding source code. Additionally to what is available via FDOC/FDOD this
allows to access:
 - the softstraps which are used to configure the chipset by flash content
   without the need for BIOS routines. on ICH8 it is possible to read those
   with FDOC/FDOC too, but this was removed in later chipsets.
 - the ME VSCC (Vendor Specific Component Capabilities) table. simply put,
   this is an SPI chip database used to figure out the flash's capabilities.
 - the MAC address stored in the GbE image.

Intel thinks this information should be confidential for ICH9 and up, but
references some tidbits in their public documentation.
This patch includes the human-readable information for ICH8, Ibex Peak
(5 series) and Cougar Point (6 series); the latter two were obtained from
leaked "SPI Flash Programming Guides" found by google. Data regarding ICH9
and 10 is unknown to us yet. It can probably found in:
"Intel® ICH7, ICH8, ICH9 and ICH10 — SPI Family Flash Programming Guide"
Information regarding the upcoming Panther Point chipset is also not included.

Corresponding to flashrom svn r1480.
Signed-off-by: default avatarStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: default avatarMatthias Wenzel <bios@mazzoo.de>
      b3850964
  3. 22 Dec, 2011 1 commit
  5. 20 Dec, 2011 4 commits
  7. 18 Dec, 2011 1 commit
  9. 14 Dec, 2011 1 commit
    • Carl-Daniel Hailfinger's avatar
      Use struct flashctx instead of struct flashchip for flash chip access · 63fd9026
      Carl-Daniel Hailfinger authored 
      
Struct flashchip is used only for the flashchips array and for
operations which do not access hardware, e.g. printing a list of
supported flash chips.

struct flashctx (flash context) contains all data available in
struct flashchip, but it also contains runtime information like
mapping addresses. struct flashctx is expected to grow additional
members over time, a prime candidate being programmer info.
struct flashctx contains all of struct flashchip with identical
member layout, but struct flashctx has additional members at the end.

The separation between struct flashchip/flashctx shrinks the memory
requirement of the big flashchips array and allows future extension
of flashctx without having to worry about bloat.

Corresponding to flashrom svn r1473.
Signed-off-by: default avatarCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: default avatarMichael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
      63fd9026
  11. 08 Dec, 2011 1 commit
  13. 02 Dec, 2011 1 commit
  15. 23 Nov, 2011 1 commit
  17. 19 Nov, 2011 1 commit
  19. 16 Nov, 2011 1 commit
  21. 15 Nov, 2011 1 commit
  23. 14 Nov, 2011 1 commit
  25. 13 Nov, 2011 2 commits
  27. 09 Nov, 2011 1 commit
  29. 08 Nov, 2011 2 commits
  31. 06 Nov, 2011 1 commit
    • Stefan Tauner's avatar
      ichspi: use a variable to distinguish ich generations instead of spi_programmer->type · a8d838d9
      Stefan Tauner authored 
      
The type member is enough most of the time to derive the wanted
information, but
 - not always (e.g. ich_set_bbar),
 - only available after registration, which we want to delay till the
   end of init, and
 - we really want to distinguish between chipset version-grained
   attributes which are not reflected by the registered programmer.

Hence this patch introduces a new static variable which is set up
early by the init functions and allows us to get rid of all "switch
(spi_programmer->type)" in ichspi.c. We reuse the enum introduced
for descriptor mode for the type of the new variable.

Previously magic numbers were passed by chipset_enable wrappers. Now
they use the enumeration items too. To get this working the enum
definition had to be moved to programmer.h.

Another noteworthy detail: previously we have checked for a valid
programmer/ich generation all over the place. I have removed those
checks and added one single check in the init method. Calling any
function of a programmer without executing the init method first, is
undefined behavior.

Corresponding to flashrom svn r1460.
Signed-off-by: default avatarStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: default avatarCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
      a8d838d9
  33. 04 Nov, 2011 1 commit
  35. 02 Nov, 2011 1 commit
  37. 22 Oct, 2011 2 commits
  39. 21 Oct, 2011 2 commits
  41. 20 Oct, 2011 2 commits
  43. 14 Oct, 2011 1 commit
  45. 18 Sep, 2011 3 commits
  47. 17 Sep, 2011 4 commits
  49. 15 Sep, 2011 2 commits
    • Stefan Tauner's avatar
      ichspi: add ICH/PCH flash descriptor decoding via FDOC/FDOD · 1e14639f
      Stefan Tauner authored 
      
Based on the work of Matthias 'mazzoo' Wenzel this patch adds pretty
printing of those ICH/PCH flash descriptor sections that are
cached/mapped by the chipset (and which are therefore reachable via
FDOC/FDOD registers).

this includes the following:
- content section:
    describes the image and some generic properties (number of
    sections, offset of sections, PCH/ICH and MCH/PROC strap
    offsets and lengths)
- component section:
    identify the different SPI flash chips and their capabilities.
- region section
    similarly to a partition table this describes the different regions.
    the content of FLREG* is derived from this section.
- master section
    defines SPI master (host, ME, GbE) access rights of the
    individual regions. the content of PR* is derived from this section.

this is only a part of the data included in the descriptor. other
information can be retrieved from a complete binary dump of the
descriptor region only.

this patch also adds macros and pretty printing for "Vendor Specific
Component Capabilities" registers: there are two of them: lower and
upper. they describe the properties of the address space divided by
FPBA (which allows to use multiple flash chips or partitions with
different properties). the properties of all supported flash chips
(together with their RDIDs) are stored in the same format in table
in a descriptor section (which is used by the ME apparently). a
later patch will use the macros outside of ichspi.c which is the
reason why the prettyprinting function and the register bit macros
are not defined in ichspi.c but ich_descriptors.h (else they would
be moved in the follow-up patch).

because this patch relies on (compiler) implementation-specific
layouting of bit-fields, it checks for correct layout before taking
any action on runtime.

Corresponding to flashrom svn r1443.
Signed-off-by: default avatarStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: default avatarCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
      1e14639f
    • Urja Rannikko's avatar
      serprog: add SPI support · c93f5f12
      Urja Rannikko authored 
      
Adds a new opcode (0x13) that just relays SPI bytes and wires it up to be
usable within serprog.c. Checks for mandatory opcodes are moved around and
changed a bit, but non-SPI programmers should not be harmed by this patch.

Corresponding to flashrom svn r1442.
Signed-off-by: default avatarUrja Rannikko <urjaman@gmail.com>
Signed-off-by: default avatarStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: default avatarUwe Hermann <uwe@hermann-uwe.de>
      c93f5f12
  51. 14 Sep, 2011 1 commit

Powered by Integricloud