GitLab

All programmer access function prototypes except init have been made
static and moved to the respective file.

A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.

The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.

Corresponding to flashrom svn r1474.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

All programmers are now calling programmer registration functions and
direct manipulations of buses_supported are not needed/possible anymore.

Note: Programmers without parallel/LPC/FWH chip support should not call
register_par_programmer().

Additional fixes:
Set max_rom_decode.parallel for drkaiser.
Remove abuse of programmer_map_flash_region in it85spi.
Annotate several FIXMEs in it85spi.

Corresponding to flashrom svn r1463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

- add Asus Crosshair IV Extreme to the list of supported boards
  http://www.flashrom.org/pipermail/flashrom/2011-August/007640.html
- add Biostar N68S3+ to the list of supported boards
  http://www.flashrom.org/pipermail/flashrom/2011-September/007788.html
- add P7H55-M LX to the list of supported boards
  although flashrom works correctly, it is marked as not ok, because flashing the
  vendor image will break the LAN interface.
- add GA-X58A-UD7 to the list of supported boards
  http://paste.flashrom.org/view.php?id=739
- add Asus P4P800-VM to print.c
  (has a working board enable)
- add Asus K8V-X to print.c
  reported by florz
  http://paste.flashrom.org/view.php?id=742
- add Intel D865GLC to print.c as non-working (ICH5 with BIOS lock enable)
  reported by jmd on IRC
  http://paste.flashrom.org/view.php?id=775
- add Intel DH67CF to print.c as non-working (H67 with BIOS lock enable and locked ME region)
  http://www.flashrom.org/pipermail/fla...

It's shorter to type, and we have less problems with the 80 column limit.

Corresponding to flashrom svn r1396.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This patch attempts to resolve some programmer shutdown ordering issues
by having the programmer init functions register shutdown callbacks explicitly
wherever it makes most sense. Before, assumptions were made that could lead to
the internal programmer's state changing before the external programmer could be
shut down properly. Now, each programmer cleans up after itself and (hopefully)
performs each operation in the correct order.

As a side-effect, this patch gives us a better usage model for reverse
operations such as rpci_* and rmmio_*. In the long-run, this should make
reversing the initialization process easier to understand, less tedious, and
less error-prone.

In short, this patch does the following:
- Registers a shutdown callback during initialization for each programmer.
- Kills the .shutdown function pointer from programmer_entry struct. Also,
  make most shutdown functions static.
- Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls).

TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff)

Corresponding to flashrom svn r1338.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>

Corresponding to flashrom svn r1297.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Anton Kochkov <anton.kochkov@gmail.com>
Acked-by: Anton Kochkov <anton.kochkov@gmail.com>