GitLab

Else libftdi complains that it is impossible to set interface on an already
open device since 1c5fa36b67bc30742eee94ed3e3648fcd4640f24
(which will probably end up in libftdi 0.21).

Corresponding to flashrom svn r1573.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, alter the page size of the other family members to indicate that it is
unused. Maybe this accelerates the deletion of this field... haha.

Corresponding to flashrom svn r1572.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Introduce a new opcode (0x14) that sends the requested frequency as a 32b
long value in Hertz to the programmer and receives the frequency eventually
chosen by the programmer. The user can specify this with the programmer
parameter "spispeed" (named after the similar parameter for the buspirate)
including an optional suffix of 'M' or 'k' for specifying megahertz or kilohertz
respectively (lowercase suffixes are also accepted).

Thanks to Idwer and Uwe (and maybe others) for their feedback especially
regarding the unit of frequency to use.

Corresponding to flashrom svn r1571.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

 - allows for compilation with -Werror=shadow,
 - use extended line limit to fix the most awful line breaks.

Corresponding to flashrom svn r1570.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

And remove the unused force parameter.

Corresponding to flashrom svn r1569.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Abit KN8 Ultra, agami/island aruma and IWILL DK8-HTX had no secondary
PCI IDs which complicates things.
Some google foo discovered some appropriate IDs, but they are all untested.
Let's pretend this breaks nothing.

Corresponding to flashrom svn r1568.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Move Mac OS X IOKit/DirectHW availability checks in the Makefile from
compiler check to pciutils check.

Print the compiler error messages for feature detection.

Add DOS libpci in the Makefile includes only if a PCI-based programmer
was requested.

Restrict mmap usage in ich_descriptors_tool to Unix style systems.

Build ich_descriptors_tool with the correct .exe extension on
DOS/Windows.

Build ich_descriptors_tool by default on x86. (Patch by Stefan Tauner)

Print the Windows version instead of "unknown machine" on Windows.

Don't #define our own __DARWIN__, use the standard OS X detection
method.

Update the README.

Add more generated files to svn:ignore

Corresponding to flashrom svn r1567.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The PCI IDs are generic VIA IDs. Only Biostar IDs are those of the LOM, but
that would not be a good choice for ID. So autodetection has been disabled
and the user needs to specify -p internal:mainboard=biostar:m7viq instead.

Corresponding to flashrom svn r1566.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1565.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1563.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

In r1549 #include "hwaccess.h" was moved to individual drivers.
Unfortunately, flashrom.c was forgotten. This caused flashrom to falsely
report an unknown PCI library version and big-endianness on all
platforms.

Add #include "hwaccess.h".
Explicitly check for __flashrom_BIG_ENDIAN__

Corresponding to flashrom svn r1562.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Make them real progress indicators with a final "done" message on success.

Corresponding to flashrom svn r1561.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

- introduce spi_prettyprint_status_register_atmel_at25_wpen()
- use spi_prettyprint_status_register_bit() where possible
- generify spi_prettyprint_status_register_bp3210 and use it in at25.c too

Corresponding to flashrom svn r1560.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1558.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This patch removes the remaining exit calls from
 - sp_openserport
 - sp_opensocket
 - sp_docommand
 - internal_init

Almost all of this was done by Niklas.

Corresponding to flashrom svn r1557.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

For
- chipsets
- boards, and
- chips

Previously the chipset columns were not uniformly divided at all,
which led to very odd table bottoms. This patches fixes this as far
as wiki code can do (browser rendering can still create odd effects
because we do not define cell heights).

Corresponding to flashrom svn r1556.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Previously boards in the wiki were tagged either as working or as known
bad. But we added support to various boards via board enables that were
then never tested because the owners have not reported back. This can
now be tagged with NT and is shown appropriately.

Also, the underlying data structure indicating state was converted from
macros to an enum while preserving original integer values and is used
for programmers and chipsets too.

Corresponding to flashrom svn r1555.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Tested Mainboards:
OK:
 - ASRock A780FullHD
   http://www.flashrom.org/pipermail/flashrom/2012-July/009599.html
 - ASRock 880G Pro3
   http://www.flashrom.org/pipermail/flashrom/2012-July/009492.html
 - ASRock N61P-S
   http://www.flashrom.org/pipermail/flashrom/2012-May/009316.html
 - ASUS M2N68-VM
   http://www.flashrom.org/pipermail/flashrom/2012-May/009334.html
 - ASUS M3N78 PRO
   http://www.flashrom.org/pipermail/flashrom/2012-July/009519.html
 - ASUS M4N68T V2
   http://www.flashrom.org/pipermail/flashrom/2012-May/009277.html
 - ASUS M5A78L-M LX
   reported by clavile on IRC
 - ASUS P8P67 PRO (rev. 3.0)
   http://www.flashrom.org/pipermail/flashrom/2012-April/009188.html
 - ASUS P8Z68-V
   reported by Kano on IRC
   http://paste.flashrom.org/view.php?id=1232
 - ASUS SABERTOOTH 990FX
   http://paste.flashrom.org/view.php?id=1214
 - Dell Inspiron 1420
   http://www.flashrom.org/pipermail/flashrom/2012-May/009196.html
 - ECS GF8200A
   http://www.flashrom.org/pipermail/flashrom/2012-May/009256.html
 - GIGABYTE GA-H61M-D2H-USB3
   http://www.flashrom.org/pipermail/flashrom/2012-May/009333.html
 - MSI MS-7250 (K9N SLI (rev 2.1))
   http://www.flashrom.org/pipermail/flashrom/2012-June/009436.html
 - MSI MS-7676 (Z68MA-G45 (B3))
   http://www.flashrom.org/pipermail/flashrom/2012-June/009424.html
 - Palit N61S
   http://www.flashrom.org/pipermail/flashrom/2012-May/009212.html

NOT OK:
 - ASRock H61M-ITX
   http://www.flashrom.org/pipermail/flashrom/2012-May/009224.html
 - Dell Latitude E6520
   http://www.flashrom.org/pipermail/flashrom/2012-May/009197.html
 - Dell Vostro 3700
   http://www.flashrom.org/pipermail/flashrom/2012-May/009197.html
 - Intel DH61AG
   http://www.flashrom.org/pipermail/flashrom/2012-June/009417.html
 - Intel DQ965GF
   http://www.flashrom.org/pipermail/flashrom/2012-May/009295.html
 - HP/Compaq 8100 Elite CMT PC (304Bh)
   http://paste.flashrom.org/view.php?id=1182
 - HP Z400 Workstation (0AE4h)
   http://www.flashrom.org/pipermail/flashrom/2012-June/009350.html
 - Supermicro X9DR3-F
   http://www.flashrom.org/pipermail/flashrom/2012-June/009422.html
   

Tested flash chips:
 - mark AMIC A25L032 as TEST_OK_PREW (+PREW)
   http://www.flashrom.org/pipermail/flashrom/2012-June/009363.html
 - mark Atmel AT25DF321A as TEST_OK_PREW (+REW)
   http://www.flashrom.org/pipermail/flashrom/2012-July/009492.html
 - mark Atmel AT26DF161 as TEST_OK_PR (+PR)
   http://www.flashrom.org/pipermail/flashrom/2012-June/009350.html
 - mark Eon EN25QH16 as TEST_OK_PR (+PR)
   http://www.flashrom.org/pipermail/flashrom/2012-July/009566.html
 - mark SST SST39VF010 as TEST_OK_PREW (+W)
   http://www.flashrom.org/pipermail/flashrom/2012-June/009425.html
 - mark ST M25P64 as TEST_OK_PREW (+PREW)
   http://www.flashrom.org/pipermail/flashrom/2012-May/009332.html

Tested chipset enables:
 - Intel 3420
   http://www.flashrom.org/pipermail/flashrom/2012-May/009332.html

 - Add board enable for ASUS P5GD2-X
   lspci: http://paste.flashrom.org/view.php?id=1234
   write: http://paste.flashrom.org/view.php?id=1240



Miscellaneous
 - Reorder some boards in print.c.
 - Remove broken abit URLs.
 - Whitespace changes.
 - Fix the maximum number of southbridge straps in the ICH descriptor structs.
 - Refine documentation regarding ICH region lock bits.
 - Demote verbosity of ICH Opcode reprogramming to -VV.
 - Exclude Pony-SPI for DOS targets (missing serial support).

Corresponding to flashrom svn r1554.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

I looked at the datasheet to be sure that the strap names (SPI, PCI,
LPC) are the same as on the series 5 and 6 chipsets.

Corresponding to flashrom svn r1553.
Signed-off-by: Helge Wagner <Helge.Wagner@ge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Fix a few man page oddities as well.

Corresponding to flashrom svn r1552.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Get_io_perms() is renamed to rget_io_perms() and automatically registers
a function to release I/O permissions on shutdown.

Actually release I/O permissions on Solaris and iopl()-supporting
operating systems like Linux.

This patch fixes quite a few programmers which forgot to release I/O
permissions on shutdown, and it simplifies the shutdown and error
handling code for all others.

Do not call exit(1) if I/O permissions are denied and return an error
instead. This part of the patch was written by Niklas Söderlund.

Corresponding to flashrom svn r1551.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Add an examples section to the man page.

Corresponding to flashrom svn r1550.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>

Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.

Corresponding to flashrom svn r1549.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Restructure PCI device detection code.
Rename pcidev_validate to pcidev_readbar.

Note: Slight changes in behaviour are possible, especially on dual/quad
chip NICs which appear as more than one PCI device. Found devices are no
longer printed at _pinfo level, but rather at _pdbg level.

Corresponding to flashrom svn r1548.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Handle PCI Device ID 0x0360 for MCP55 ISA bridge GPIO as well.

Tested-by: Stefan A. Scholtz

Corresponding to flashrom svn r1547.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

To tell the programmer how to handle the data on the spi bus, a flag in
the fourth byte sent with the usb command is used. The second word was
mistaken for the size of the chunks sent over usb earlier. The third
byte (first of the second word) is now set to zero. This also adds some
checks for the size of data chunks sent over usb.

Corresponding to flashrom svn r1546.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The only caller is able to check the return code and handle it
correctly.

Corresponding to flashrom svn r1545.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Some investigations have shown that the original dediprog driver waits
about 200ms after setting voltage up and before setting voltage down.
This patch adds those delays. It helps flash chips to come up in time.

Corresponding to flashrom svn r1544.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Currently spi_aai_write() is implemented without an abstraction
mechanism for the programmer driver. This adds another function
pointer 'write_aai' to struct spi_programmer, which is set to
default_spi_write_aai (renamed spi_aai_write) for all programmers
for now.

A patch which utilises this abstraction in the dediprog driver will
follow.

Corresponding to flashrom svn r1543.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

The patch that should have improved the clock divisor setting in r1537 made
it much worse: the divisor used was from an uninitialized buffer.

Corresponding to flashrom svn r1542.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

The buffer management of the Bus Pirate driver has been revamped to use
grow-only buffers with a reasonable initial default size so realloc()
will not have to be called in normal operation. A side effect is the
ability to switch to a static buffer without major hassle.
Handle OOM gracefully.

Corresponding to flashrom svn r1541.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>

Usage: flashrom --output logfile.txt

Logfile output has at least dbg2 verbosity or screen verbosity,
whichever is greater.

Corresponding to flashrom svn r1540.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on Linux, Windows and FreeBSD.
Acked-by: Idwer Vollering <vidwer@gmail.com>

This flash is like PMC model Pm39LV010 but capacity is 64kB.
Model ID was already defined. PREW works for me.

Corresponding to flashrom svn r1539.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>

The currently unreferenced function in sharplhf00l04.c does a standard
FWH block protection reset (writes 0 to the protection register) and a
standard FWH block erase.

Corresponding to flashrom svn r1538.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This adds an optional argument when using the ft2232_spi programmer to set
the frequency divisor. The valid values for the divisor is any even integer
between 2 and 131072.

Corresponding to flashrom svn r1537.
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Clean up cli_output.c to be more readable.
Use enum instead of #define for message levels.
Kill a few exit(0) calls.
Print the command line arguments in verbose mode.
Move actions (--list-supported etc.) after argument sanity checks.
Reduce the number of code paths which have their own
programmer_shutdown().

Corresponding to flashrom svn r1536.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Its ID was spotted in an descriptor region update by Jetway:
http://paste.flashrom.org/view.php?id=1217



Corresponding to flashrom svn r1535.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

The chip features a complete 1.0 SFDP JEDEC flash parameter table and also a
vendor-specific extension table (defining voltages, lock bits etc).
NB: the MX25L6436 uses the same RDID as the MX25L6405.

Corresponding to flashrom svn r1534.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add ITE IT8707F/IT8710F detection.

Note that we autodetect those chips, but we don't handle their flash
translation features automatically yet.

Corresponding to flashrom svn r1533.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Corresponding to flashrom svn r1532.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>  
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>