GitLab

Corresponding to flashrom svn r535.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r531.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Document new 'satasii' programmer in -L output and manpage.

 - Drop PCI_IO_BASE_ADDRESS, pci.h has such #defines already.

 - Beautify flashrom output and make it more consistent.
 
 - Same for the 'make' output (reordered some $CC parameters).
   Build-tested on i386, shouldn't break any builds, I think.

 - Some variable renaming and other cosmetic fixes.

Corresponding to flashrom svn r529.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

It was easy because

1) flashrom has now nice API 2) documentation is public on the web site

Corresponding to flashrom svn r527.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Supported out of the box (no flash enables required)

 - Verifiably not yet working (unknown flash enable)

Also, move some structs to flash.h in preparation for later wiki
output support.

Corresponding to flashrom svn r523.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

They serve pretty much no purpose, compilers can optimize pretty much
all of what we might mark as inline anyway, _and_ inlines are not
enforced in any way by the compiler either. They're totally unneeded.
Kill them.

Corresponding to flashrom svn r522.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Build-tested on 32bit x86.

Corresponding to flashrom svn r521.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Use chipaddr instead of volatile uint8_t * because when we access chips
in external flashers, they are not accessed via pointers at all.

Benefits: This allows us to differentiate between volatile machine
memory accesses and flash chip accesses. It also enforces usage
of chip_{read,write}[bwl] to access flash chips, so nobody will
unintentionally use pointers to access chips anymore. Some unneeded
casts are removed as well. Grepping for chip operations and machine
memory operations doesn't yield any false positives anymore.

Compile tested on 32 bit and 64 bit Linux.

Corresponding to flashrom svn r519.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The emulation works by splitting 32 bit accesses into 16 bit accesses
and 16 bit accesses into to 8 bit accesses. That way, external flashers
can mix and match the amount of emulation they need.

Corresponding to flashrom svn r517.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Move the reusable PCI specific parts into pcidev.c, they'll be usable
for other NIC code (Realtek, VIA, ...) and also for SATA/IDE controller
cards as external programmers (for every PCI device which can program
EEPROMs basically).

Also add print_supported_pcidevs() to show the supported PCI devices
(currently only NICs, soon more) in the 'flashrom -L' output.

Corresponding to flashrom svn r515.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add support for users to specify a certain NIC via PCI bus:slot.func
notation, in case there are multiple NICs in one system.

Usage: flashrom -p nic3com=bb:ss.f

Corresponding to flashrom svn r510.
Signed-off-by: Christian Ruppert <spooky85@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This allows flashrom to identify, read, write, erase and verify flash chips
on (some) 3COM network cards. The patch uses the external programmer
infrastructure, the network card is basically treated as an external
flash programmer.

Usage:

$ ./flashrom -p nic3com
flashrom v0.9.0-r498
Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400
Calibrating delay loop... OK.
Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000.
No operations were specified.

$ ./flashrom -p nic3com -E
flashrom v0.9.0-r498
Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400
Calibrating delay loop... OK.
Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000.
Erasing flash chip... SUCCESS.

$ ./flashrom -p nic3com -wv backup.bin
flashrom v0.9.0-r498
Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400
Calibrating delay loop... OK.
Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000.
Flash image seems to be a legacy BIOS. Disabling checks.
Programming page: 1023 at address: 0x0000ffc0
Verifying flash... VERIFIED.

$ ./flashrom -p nic3com -r backup.bin
flashrom v0.9.0-r498
Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400
Calibrating delay loop... OK.
Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000.
Reading flash... done.

I have tested this on actual hardware (see PCI IDs above) and all
operations worked fine.

Support for other 3COM cards will follow (I added some more which should
be supportable by this code, but they're untested so far), as well as
support for NICs from other vendors.

The patch also adds support for the Atmel AT49BV512 which is soldered
onto the 3COM NIC I used for testing.

Corresponding to flashrom svn r499.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Mateusz Murawski <matowy@tlen.pl>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Print the return value of dummy_chip_read[bwl].
Align entries in programmer_table.

This is a cosmetic patch and has no effect on code flow.

Corresponding to flashrom svn r495.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>

Flash mapping/unmapping was performed without an abstraction layer,
so even the dummy flasher caused memory mappings to be set up. Add
map/unmap functions to the external flasher abstraction.

Fix a possible scribble-over-low-memory corner case which fortunately
never triggered so far.

With this patch, --programmer dummy works fine as non-root.

Corresponding to flashrom svn r493.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Add lock bit handling (printing, setting and checking) to SST FWH chips
and abort any writes to locked sectors. Verbose mode gives you all the
info. Normal mode only tells you of unlocking failed, but gives enough
details to debug.

Add a comment about flash register placement to flashrom.c.

Thanks to Uwe for testing multiple iterations of this patch.

Corresponding to flashrom svn r492.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r489.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Flashbase is a variable which should never be set outside chipset code.
It is only used to calculate the base address of the flash space at
exactly one location in the code.

Setting flashbase during probe caused subsequent probes to fail unless
special handling code was used. We had such code and it caused every
probe except the first to fail on Elan SC520.

Remove the superfluous flashbase assignment and simplify the rest of the
code.

Corresponding to flashrom svn r488.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>

Usage:
flashrom --programmer dummy

This is a great way to test flashrom without root access.

Corresponding to flashrom svn r483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r481.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

- Read/write accesses through function pointers
- Command line parameter for internal/external flasher
- Board and chipset setup moved to internal init function
- Shutdown stuff moved to internal shutdown function

As a side benefit, this will allow us to undo chipset write enable
during shutdown.

Tested by Uwe on real hardware.

Corresponding to flashrom svn r476.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r475.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Flashrom assumes that the flash chip contents are available via mmap if
no read function is defined.

This special case is handled in lots of places all over the code.

Remove the special case and use the read_memmapped function. Not only
does this allow us to fix a read bug in flashrom I recently uncovered on
ICH SPI, it also allows us to add support for Paraflasher to flashrom.

Corresponding to flashrom svn r473.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Suggested by Peter Stuge.

Corresponding to flashrom svn r471.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r454.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

Fix compilation on Solaris and tell people how to compile flashrom on
Solaris, Darwin/Mac OS X and DragonFly BSD.

Thanks to Joerg Schilling and Patrick Georgi for the Solaris part.

Corresponding to flashrom svn r452.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

(all-caps or no-caps for short options, exclude range syntax, etc.) we
should tell users in the man page and the usage message about this.

Corresponding to flashrom svn r447.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

There are still some tweaks necessary to get flashrom to build on
DragonFly, but this helps a lot.

Corresponding to flashrom svn r445.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Also, fix smaller cosmetics

Corresponding to flashrom svn r442 and coreboot v2 svn r4205.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Elan SC520 requries us to deal with flash chip base addresses at locations
other than top of 4GB. The logic for that was incorrectly triggered also when
a board had more than one flash chip. This patch will honor flashbase only when
probing for the first flash chip on the board, and look at top of 4GB for later
chips.

Corresponding to flashrom svn r415 and coreboot v2 svn r3932.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Myles Watson <mylesgw@gmail.com>

Corresponding to flashrom svn r412 and coreboot v2 svn r3923.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r397 and coreboot v2 svn r3903.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

The function exit()s on failure, and no callers check the return value.

Corresponding to flashrom svn r396 and coreboot v2 svn r3901.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

As reported by Jody McIntyre. Thanks!

Corresponding to flashrom svn r389 and coreboot v2 svn r3894.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r386 and coreboot v2 svn r3890.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Resolves #121

Corresponding to flashrom svn r385 and coreboot v2 svn r3889.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r381 and coreboot v2 svn r3860.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Fix build error on distros with warn_unused_result attributes in glibc.

Corresponding to flashrom svn r378 and coreboot v2 svn r3857.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Yul Rottmann <yulrottmann@bitel.net>

Looks like this:

Supported flash chips:          Tested OK operations:   Known BAD operations:

AMD Am29F002(N)BB                                       
AMD Am29F002(N)BT               PROBE READ ERASE WRITE  
AMD Am29F016D                                           
AMD Am29F040B                   PROBE READ ERASE WRITE  
AMD Am29LV040B                                          
Atmel AT45CS1282                                        READ 

Corresponding to flashrom svn r362 and coreboot v2 svn r3803.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Thanks to Niels Ole Salscheider for the problem report.

Corresponding to flashrom svn r360 and coreboot v2 svn r3798.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Flashrom used to exit 0 even if erase failed. Not anymore.

Corresponding to flashrom svn r359 and coreboot v2 svn r3797.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>