GitLab

If you want support for a particular piece of hardware, just fill in
a few functions in spi_bitbang_master_table. That's it.
On top of this, the RayeR SPI flasher should be supportable in ~20 LOC.

Tested, trace looks OK.

Corresponding to flashrom svn r736.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r735.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - ASUS M3A78-EM (reported by Christian Heinz <christian.ch.heinz@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-September/000629.html
 
 - MSI MS-7368 (K9AG Neo2-Digital) (reported by Joshua Roys <roysjosh@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-September/000632.html

 - GIGABYTE GA-MA770T-UD3P (reported by Kevin Sopp <baraclese@googlemail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-September/000529.html


   
 - Elitegroup P6VAP-A+
   Tested by Uwe Hermann <uwe@hermann-uwe.de> on hardware. Maximum supported
   chip size in this board is 256 KB.
   
Small changes in print.c were required to adjust for longer board names.

Corresponding to flashrom svn r734.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

See http://www.coreboot.org/pipermail/coreboot/2009-July/050675.html

.

Corresponding to flashrom svn r733.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This is successfully tested by me on the Elitegroup P6VAP-A+ board.

Corresponding to flashrom svn r732.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Annotate SST49LF004B quirks for TBL#.

Add TEST_OK_PRW which is useful when a PREW chip gets a new erase
routine.

Change a few erase function prototypes to use unsigned int instead of
int.

Corresponding to flashrom svn r731.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>

I tested it on the Wyse Winterm S50 see attached test results.

Corresponding to flashrom svn r730.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

On the Wyse Winterm S50 lspci doesn`t show the cs5536 hostbridge and so 
flashrom doesn`t detect the cs5536.

This patch is adding the cs5536 isa id [1022:2090] for chip detect.

Corresponding to flashrom svn r729.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This code has been tested. 

Corresponding to flashrom svn r728.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>

The current ICH SPI preop handling is a hack which spews lots of warnings, but still yields correct results

With the multicommand infrastructure I introduced in r645, it became
possible to integrate ICH SPI preopcodes cleanly into the flashrom
design.

The new code checks for every opcode in a multicommand array if it is a
preopcode. If yes, it checks if the next opcode is associated with that
preopcode and in that case it simply runs the opcode because the correct
preopcode will be run automatically before the opcode.

Corresponding to flashrom svn r727.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: FENG Yu Ning <fengyuning1984@gmail.com>

Trivial, and build-tested.

Corresponding to flashrom svn r726.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This is useful for libflashrom (you don't need wiki output in a coreboot
payload).

Wiki output is now disabled by default. If you want to enable it, run
make CONFIG_PRINT_WIKI=yes

Corresponding to flashrom svn r725.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Example make commandline if you want only internal programmers:
make CONFIG_FT2232SPI=no CONFIG_SERPROG=no CONFIG_NIC3COM=no
CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_DUMMY=no

Of course, all of the CONFIG_* symbols can be mixed and matched as
needed. CONFIG_FT2232SPI is special because even if it is enabled, make
will check if the headers are available and skip it otherwise.

Corresponding to flashrom svn r724.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r723.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>

Corresponding to flashrom svn r722.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>

This commit fixes only some of the issues, those that were
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r721.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r720.
Signed-off-by: Joerg Fischer <turboj@gmx.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

I decided to fill in the info for a
few chips to illustrate how this works both for uniform and non-uniform
sector sizes.

struct eraseblock{
int size; /* Eraseblock size */
int count; /* Number of contiguous blocks with that size */
};

struct eraseblock doesn't correspond with a single erase block, but with
a group of contiguous erase blocks having the same size.
Given a (top boot block) flash chip with the following weird, but
real-life structure:

top
16384
8192
8192
32768
65536
65536
65536
65536
65536
65536
65536
bottom

we get the following encoding:
{65536,7},{32768,1},{8192,2},{16384,1}

Although the number of blocks is bigger than 4, the number of block
groups is only 4. If you ever add some flash chips with more than 4
contiguous block groups, the definition will not fit into the 4-member
array anymore and gcc will recognize that and error out. No undetected
overflow possible. In that case, you simply increase array size a b...

Corresponding to flashrom svn r718.
Signed-off-by: Udu Ogah <putlinuxonit@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Use the correct reset sequence for 82802AB. Detailed explanation:
The reset sequence before ID reading was correct, so ID always
worked. But the reset sequence after ID reading was a copy-paste
leftover from probe_jedec and didn't have any effect. I dug up
flash_and_burn from the freebios-v1 tree and found out that 82802ab.c
was indeed a copy of jedec.c with lots of experimental unannotated #if 0
and #if 1.
About the wait_82802ab change:
Before the patch, wait_82802ab entered read status mode, switched to ID
mode, then tried an incorrect and unsupported JEDEC command to exit ID
mode. Nobody ever saw that this failed because all subsequent function
calls had the correct reset sequence at the beginning.
With the patch, wait_82802ab enters read status mode, then switches back
to read mode with the official reset command.

Corresponding to flashrom svn r717.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Fall back to svn info if svnversion fails.

Corresponding to flashrom svn r716.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Initialize the sockaddr,sockaddr_in union directly instead of running
memset later.

Corresponding to flashrom svn r715.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r714.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r713.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The vendor sold different designs under that name, the patch works with
the one that has an Actel FPGA as PCI-to-Flash bridge.

The Flash chip is a "Macronix MX29F001B" (128 KB, parallel) soldered
directly to the PCB.
Flash operations (PROBE, READ, ERASE, WRITE) work as expected.

Corresponding to flashrom svn r712.
Signed-off-by: TURBO J <turboj@gmx.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The __func__ variant is standardized in C99 and recommended to be
used instead of __FUNCTION__ in the gcc info page.

Only _very_ old versions of gcc did not know about __func__, but we've
been using both __func__ and __FUNCTION__ for a long while now, and
nobody complained about this, so all our users seem to use recent
enough compilers.

Corresponding to flashrom svn r711.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Please refer to the release notes for a high-level overview of all the
amazing changes and added features since 0.9.0.

Corresponding to flashrom svn r709.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Even a failing chipset init (maybe due to unknown chipset) could still
get us reasonable probe results or at least forced reads.

Corresponding to flashrom svn r708.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

This is a followup to r705.

Corresponding to flashrom svn r707.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>

Corresponding to flashrom svn r706.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>

Raises GP32 on IT8712F, and comes with a more general routine to set
io lines on the IT8712F.

Corresponding to flashrom svn r705.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Udu Ogah <putlinuxonit@gmail.com>

With this patch, make tarball and make export still work as expected,
but if you specify RELEASENAME=foo, then the directories and tarballs
are named flashrom-foo instead of flashrom-0.9.0-r703. This makes
release creation a lot easier. As an example, look at creating the 0.9.1
tarball: # make tarball RELEASENAME=0.9.1

Corresponding to flashrom svn r704.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Update bad board list and remove boards where either the chipset is
not supported (not a board issue) or where we have no report in the
archives.

Corresponding to flashrom svn r703.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Marked as OK:

 - ASUS A8V Deluxe (reported by Joachim Ernst <Joachim.Ernst@web.de>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000448.html
   Tested with r701.

 - ASUS P5L-MX (reported by Vasiliy Vylegzhanin <6vasia@gmail.com>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000446.html
   Tested with v0.9.0.

 - Abit Fatal1ty F-I90HD (reported by Joachim Ernst <joachim.ernst@web.de>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000435.html

 - Trigem Lomita (reported by Udu Ogah <putlinuxonit@gmail.com>)
   Tested with r695.

 - GIGABYTE GA-MA790GP-DS4H (reported by Ralph Loader <suckfish@ihug.co.nz>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000414.html
   http://www.flashrom.org/pipermail/flashrom/2009-August/000417.html

 - GIGABYTE GA-MA78GPM-DS2H (reported by
                             Erik Haugen Bakke <erik_hb_mlist@yahoo.com.au>)
   http://www.flashrom.org/pipermail/flashrom/2009-August/000329.html



Corresponding to flashrom svn r702.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r701.
Signed-off-by: Joerg Mayer <jmayer@loplof.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r700.
Signed-off-by: Joerg Mayer <jmayer@loplof.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Reported by Mark Panajotovic <panajotovic.marko@gmail.com>.

Corresponding to flashrom svn r699.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r698.
Signed-off-by: Mark Panajotovic <panajotovic.marko@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Reported by Mark Panajotovic <panajotovic.marko@gmail.com>.

Corresponding to flashrom svn r697.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Anne Le Coq <annyvonne.le_coq@alcatel-lucent.fr> reported that flashrom
didn't recognize her ICH9 LPC controller on the Green City Intel
Customer Reference Board with ICH9 + Tylersburg Chipset. According to
http://pci-ids.ucw.cz/read/PC/8086/2910

 the ID 0x8086/0x2910 was used
for engineering samples. No intel doc mentions this ID at all.

Corresponding to flashrom svn r696.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Anne Le Coq <annyvonne.le_coq@alcatel-lucent.fr>