GitLab

Raise GPIO 16 on ICH9R LPC Interface.

Corresponding to flashrom svn r642.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Richie Ward <RichieS@GMail.com>

Corresponding to flashrom svn r641.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 
 - Also print URLs of boards with board-enables.
 
 - Mark known-bad operations for chips red in the wiki.
 
 - Clarifiy a wiki message a bit.

Corresponding to flashrom svn r640.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - VIA EPIA-M700 (reported by Jakob Bornecrantz <wallbraker@gmail.com>)
   http://www.coreboot.org/pipermail/coreboot/2009-July/050416.html

 - GIGABYTE GA-EX58-UD4P (reported by Warren Turkal <wt@penguintechs.org>)
   http://www.coreboot.org/pipermail/coreboot/2009-June/050199.html

Mark as non-working:

 - ASUS Eee PC 701 4G (reported by Uwe Hermann <uwe@hermann-uwe.de>)
   There seems to be some SPI flash translation layer, likey done by the
   embedded controller on the laptop (ENE KB3310).
   The BIOS chip in this Eee PC model is Winbond 25X40VSIG btw.
   More info: http://beta.ivancover.com/wiki/index.php/Eee_PC_Research

Mark this chip as tested:

 - ST M25P40 (reported by Jakob Bornecrantz <wallbraker@gmail.com>)
   http://www.coreboot.org/pipermail/coreboot/2009-July/050416.html



Other:

 - Make the "Albatron PM266A" board detection print "Albatron PM266A*" as this
   enable will actually work for other PM266A* boards according to libv.
   However, the code was actually tested on "Albatron PM266A Pro".

 - Add some more board URLs / notes.

 - s/BioStar/Biostar/ as per vendor website.

 - Fix typo in print.c: s/A7V8-MX SE/A7V8X-MX SE/.

Corresponding to flashrom svn r639.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

B.

Corresponding to flashrom svn r638.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Jakob Bornecrantz <wallbraker@gmail.com>
Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>

Thanks to Uwe for the suggestion.

Corresponding to flashrom svn r637.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Properly escape '-' chars in manpage.
 
 - Fix typo in chipset_enable.c.

 - Drop useless 'return' in chip_readn().

 - Random other whitespace or cosmetic fixes.

Corresponding to flashrom svn r636.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r635.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Also noted as a comment if an FWH/LPC chip supports A/A Mux mode.

Corresponding to flashrom svn r634.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

If the programmer didn't initialize correctly, it is pointless to
continue.

Fix standalone IT87* SPI init to set flashbus to NONE if no IT87* SPI
communication is possible. Print the I/O port detected by the IT87* SPI
code.

Corresponding to flashrom svn r633.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>

Tested by Urja Rannikko with external flasher.
Tested by Uwe Hermann with onboard flash.

Corresponding to flashrom svn r632.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Should this be undesireable because of speed reasons, --noverify can be
used to suppress an auto-verify.

Corresponding to flashrom svn r631.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Harald Gutmann <harald.gutmann@gmx.net>

Since block erase functions do not know the block length (it's not
specified in any standard), block erase functions now get an additional
parameter blocklen. This enables flashrom to verify the erase result for
block erase functions at correct boundaries.

Tested by Uwe on SB600.

Corresponding to flashrom svn r630.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The new abstraction can handle out-of-band chip communication protocols
as well. The old abstraction caused spurious false positives for erase
on SPI and spurious false negatives for verify on SPI.

Make verify_flash() use verify_range().

Tested by Uwe on SB600.

Corresponding to flashrom svn r629.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

A file is already specified directly in conjunction for -r/-w/-v.

Corresponding to flashrom svn r628.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - ASUS P5KC (reported by Andrei Pavlov <pavlov.andrei@rambler.ru>)
 
 - GIGABYTE GA-EP35-DS3L (reported by Alexander Gordeev <lasaine@lvk.cs.msu.su>)
 
Add a few more URLs.

Corresponding to flashrom svn r627.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Let %.o handle flashrom.o as well.

Corresponding to flashrom svn r626.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>

Supports RS-232, USB serial converters (untested) and TCP streams.

All functionality is stubbed out to allow multiplatform compile testing
of the headers we use.
The real serial flasher protocol driver will be committed next.

Corresponding to flashrom svn r625.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This fixes compilation for them.

Corresponding to flashrom svn r624.
Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Make a few local functions in sb600spi.c static.

Corresponding to flashrom svn r623.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>

Thanks to Michael Stapelberg for the report.

Corresponding to flashrom svn r622.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Thanks to Simon Brown for the report.

Corresponding to flashrom svn r621.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Thanks to Harald Gutmann for testing.

Corresponding to flashrom svn r620.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Thanks to Wangji for testing and pointing out that EN25* chips were
unsupported, which was handled in r580 and r592.

Corresponding to flashrom svn r619.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Turns out that the GIGABYTE GA-7ZM _does_ work fine if you disable
the BIOS flash protection option _and_ remove jumper JP9 on the board
(d'oh!).

This board can decode 512 KB chips just fine (not just 256 KB).

Corresponding to flashrom svn r618.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The board can decode 256 KB only (i.e., not 512 KB) it seems.

Corresponding to flashrom svn r617.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

FYI, this board can only decode 256 KB chips (not 512 KB ones) unfortunately.
The highest address line (A18) is not connected on this board.

The it8705f_write_enable() is kept generic enough so it can be reused for other
board-enables, possibly in the board_biostar_p4m80_m4() for example, but that
shouldn't be touched for now, unless someone can test the code.

Corresponding to flashrom svn r616.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Luc Verhaegen <libv@skynet.be>

 - Move board_info_url struct to print.c, doesn't have to be global.

 - Simplify flashrom.c a bit by moving stuff to print.c.
   Eliminate two now-useless mini-functions in print.c.

 - Add a note that the wiki page contents are semi-automatically generated.

 - Mention date of last wiki page update as well as the flashrom revision
   that was used to generate the wiki output.

 - Also generate list of supported laptops in -z output now.

 - Add some more board URLs.

 - Add a boards_notes[] table to allow for arbitrary footnotes/comments for
   each board in the table. All notes will automatically be turned into
   wiki footnotes with correct numbers and will appear at the end of the
   respective table.

Corresponding to flashrom svn r615.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

 - Convert #defines for strings in print.c to 'const char *'s.

 - Add missing entries in the board URL tables.

 - Add a few more board URLs, partly contributed by 'Alien' at
   http://www.coreboot.org/index.php?title=flashrom&curid=1765&diff=8626&oldid=8625&rcid=3586



 - Fix sort order of board lists.

 - Add laptops to URL list (not yet used).

 - Fix typo.

 - Fix EPIA-EX15000/NX15000 names (append "G").

Corresponding to flashrom svn r614.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Also, add support for the Silicon Image 3112(A) SATA controller.

Both have been tested by Andrew Morgan <ziltro@ziltro.com> on hardware
and work fine.

Corresponding to flashrom svn r613.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>

Thanks Clark Rawlins <clark@bit63.org> for the report!

Corresponding to flashrom svn r612.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

The new makefile structure uses indirection (.features->features) to
work around a gmake bug which resulted in immediate premature evaluation
of variable definitions with deferred evaluation.

Corresponding to flashrom svn r611.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r610.
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk>
Acked-by: Luc Verhaegen <libv@skynet.be>

ATX board for P3; Intel 82810e GMCHe, Intel 82801AA ICH and SMSC
LPC47U332 super I/O.

Corresponding to flashrom svn r609.
Signed-off-by: Michael Gold <mgold@ncf.ca>
Acked-by: Luc Verhaegen <libv@skynet.be>

It is ignored by almost every chip and does not work for external
flashers. Plus, it gives the user a false sense of security in some
corner cases.

Corresponding to flashrom svn r608.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Add a --list-supported-wiki / -z option which outputs the currently
supported flash chips (and their status, size, and type), chipsets (plus
status), mainboards (plus status), and external PCI devices usable as
programmer to stdout.

This allows for very easy pasting into the http://coreboot.org/flashrom


page, so we can keep that page up-to-date without much hassle.

The list of boards is mostly new (known good ones which don't need
write-enable code, and known-bad ones) and also lists URLs to the
vendor's mainboard pages.

Corresponding to flashrom svn r607.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r606.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>

Mark as OK:

 - ASRock A770CrossFire (reported by RIVANVX on IRC, no email available).
   User verified read and write with -wv, which VERIFIED OK.

Mark as non-working for now:

 - HP/Compaq nx9010 (laptop, reported by Murawski Mateusz <matowy@tlen.pl>).
   Hangs upon 'flashrom -V' (needs hard power-cycle then).

 - Elitegroup K7VTA3 (reported by Uwe Hermann <uwe@hermann-uwe.de>).
   Needs board-enable.

 - GIGABYTE GA-7ZM (reported by Uwe Hermann <uwe@hermann-uwe.de>).
   Needs board-enable.

Corresponding to flashrom svn r605.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Content taken from current wiki page.

Corresponding to flashrom svn r604.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r603.
Signed-off-by: Mateusz Murawski <matowy@tlen.pl>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>