GitLab

Print the return value of dummy_chip_read[bwl].
Align entries in programmer_table.

This is a cosmetic patch and has no effect on code flow.

Corresponding to flashrom svn r495.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>

Flash mapping/unmapping was performed without an abstraction layer,
so even the dummy flasher caused memory mappings to be set up. Add
map/unmap functions to the external flasher abstraction.

Fix a possible scribble-over-low-memory corner case which fortunately
never triggered so far.

With this patch, --programmer dummy works fine as non-root.

Corresponding to flashrom svn r493.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Add lock bit handling (printing, setting and checking) to SST FWH chips
and abort any writes to locked sectors. Verbose mode gives you all the
info. Normal mode only tells you of unlocking failed, but gives enough
details to debug.

Add a comment about flash register placement to flashrom.c.

Thanks to Uwe for testing multiple iterations of this patch.

Corresponding to flashrom svn r492.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r489.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Flashbase is a variable which should never be set outside chipset code.
It is only used to calculate the base address of the flash space at
exactly one location in the code.

Setting flashbase during probe caused subsequent probes to fail unless
special handling code was used. We had such code and it caused every
probe except the first to fail on Elan SC520.

Remove the superfluous flashbase assignment and simplify the rest of the
code.

Corresponding to flashrom svn r488.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>

Usage:
flashrom --programmer dummy

This is a great way to test flashrom without root access.

Corresponding to flashrom svn r483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r481.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

- Read/write accesses through function pointers
- Command line parameter for internal/external flasher
- Board and chipset setup moved to internal init function
- Shutdown stuff moved to internal shutdown function

As a side benefit, this will allow us to undo chipset write enable
during shutdown.

Tested by Uwe on real hardware.

Corresponding to flashrom svn r476.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r475.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Flashrom assumes that the flash chip contents are available via mmap if
no read function is defined.

This special case is handled in lots of places all over the code.

Remove the special case and use the read_memmapped function. Not only
does this allow us to fix a read bug in flashrom I recently uncovered on
ICH SPI, it also allows us to add support for Paraflasher to flashrom.

Corresponding to flashrom svn r473.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Suggested by Peter Stuge.

Corresponding to flashrom svn r471.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r454.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

Fix compilation on Solaris and tell people how to compile flashrom on
Solaris, Darwin/Mac OS X and DragonFly BSD.

Thanks to Joerg Schilling and Patrick Georgi for the Solaris part.

Corresponding to flashrom svn r452.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

(all-caps or no-caps for short options, exclude range syntax, etc.) we
should tell users in the man page and the usage message about this.

Corresponding to flashrom svn r447.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

There are still some tweaks necessary to get flashrom to build on
DragonFly, but this helps a lot.

Corresponding to flashrom svn r445.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Also, fix smaller cosmetics

Corresponding to flashrom svn r442 and coreboot v2 svn r4205.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Elan SC520 requries us to deal with flash chip base addresses at locations
other than top of 4GB. The logic for that was incorrectly triggered also when
a board had more than one flash chip. This patch will honor flashbase only when
probing for the first flash chip on the board, and look at top of 4GB for later
chips.

Corresponding to flashrom svn r415 and coreboot v2 svn r3932.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Myles Watson <mylesgw@gmail.com>

Corresponding to flashrom svn r412 and coreboot v2 svn r3923.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r397 and coreboot v2 svn r3903.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

The function exit()s on failure, and no callers check the return value.

Corresponding to flashrom svn r396 and coreboot v2 svn r3901.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

As reported by Jody McIntyre. Thanks!

Corresponding to flashrom svn r389 and coreboot v2 svn r3894.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Corresponding to flashrom svn r386 and coreboot v2 svn r3890.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Resolves #121

Corresponding to flashrom svn r385 and coreboot v2 svn r3889.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Corresponding to flashrom svn r381 and coreboot v2 svn r3860.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Fix build error on distros with warn_unused_result attributes in glibc.

Corresponding to flashrom svn r378 and coreboot v2 svn r3857.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Yul Rottmann <yulrottmann@bitel.net>

Looks like this:

Supported flash chips:          Tested OK operations:   Known BAD operations:

AMD Am29F002(N)BB                                       
AMD Am29F002(N)BT               PROBE READ ERASE WRITE  
AMD Am29F016D                                           
AMD Am29F040B                   PROBE READ ERASE WRITE  
AMD Am29LV040B                                          
Atmel AT45CS1282                                        READ 

Corresponding to flashrom svn r362 and coreboot v2 svn r3803.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Thanks to Niels Ole Salscheider for the problem report.

Corresponding to flashrom svn r360 and coreboot v2 svn r3798.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Flashrom used to exit 0 even if erase failed. Not anymore.

Corresponding to flashrom svn r359 and coreboot v2 svn r3797.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Bug from r3791.

Corresponding to flashrom svn r357 and coreboot v2 svn r3792.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

If flashbase was set before probe_flash() it would only ever be used once, for
the very first flash chip probe.

Corresponding to flashrom svn r356 and coreboot v2 svn r3791.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

Fixes #109

Corresponding to flashrom svn r355 and coreboot v2 svn r3790.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

If a chip has any TEST_BAD_* flag set, we don't even list the
unsupported functions, giving the user the impression that the
unsupported functions are tested.

Corresponding to flashrom svn r352 and coreboot v2 svn r3780.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>

This has been tested by Uwe Hermann on an RS690/SB600 board.

Corresponding to flashrom svn r351 and coreboot v2 svn r3779.
Signed-off-by: Jason Wang <Qingpei.Wang@amd.com>
Reviewed-by: Joe Bao <zheng.bao@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r326 and coreboot v2 svn r3669.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

Corresponding to flashrom svn r322 and coreboot v2 svn r3647.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>

This removes the false positive matches we've been seeing, and also removes
the true positive match in case there is more than one flash chip and the 2nd
or 3rd are unknown - but I think that case is uncommon enough to warrant the
improvement in the common case. Use flashrom -frc forced read if you have the
uncommon case, and/or please add the flash chip to the flashchips array.

Corresponding to flashrom svn r313 and coreboot v2 svn r3562.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Don't calculate "flash_baseaddr" until the final value of "size"
is known, otherwise we end up trying to map a page right after
the end of memory.

Fixes #112.

Corresponding to flashrom svn r308 and coreboot v2 svn r3502.
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r306 and coreboot v2 svn r3464.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r291 and coreboot v2 svn r3407.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Corresponding to flashrom svn r279 and coreboot v2 svn r3394.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>