GitLab

Pin 6 on LPT controls a pulldown on MISO/TDO signal. Whether there exists
an unbuffered clone is unknown. The author of the original patch confirmed
in private correspondence that the patch was incomplete. There has been
no sign of an unbuffered version on the interwebs, hence just change the
existing driver to disable the pulldown.

Corresponding to flashrom svn r1757.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1756.
Signed-off-by: Maksim Kuleshov <mmcx@mail.ru>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Maksim Kuleshov <mmcx@mail.ru>
Acked-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

Corresponding to flashrom svn r1755.
Signed-off-by: Maksim Kuleshov <mmcx@mail.ru>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

There is a ByteBlasterII product that is only almost compatible.

Corresponding to flashrom svn r1754.
Signed-off-by: Maksim Kuleshov <mmcx@mail.ru>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Maksim Kuleshov <mmcx@mail.ru>
Acked-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Create a list of programmer types with names, test state and linked layouts.
This list could be listed with flashrom -L in follow-up patches.

Handle a bit in status register that is inverted, this will be used
in different future programmer types.

Corresponding to flashrom svn r1753.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Maksim Kuleshov <mmcx@mail.ru>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This fixes a SEGFAULT if a layout entry is included that addresses memory
outside the current chip's address range. flashrom will only abort if the
offending region(s) is/are included else it will just warn.

It will print warnings for regions with negative or zero-length address ranges
and bail out after checking all of them.

Also, abort for non-write operations if a layout file is given because there is
no layout support for other operations yet.

Corresponding to flashrom svn r1751.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Do not rely on broken firmware to set up the SPI configuration correctly.
Some boards fail with flashrom because the firmware chose too high speeds
for the alternate SPI mode which flashrom uses. Temporarily change the
clock to the lowest common value of 16.5 MHz.

Also, disable fast reads just to be safe.

Corresponding to flashrom svn r1750.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add layout_cleanup() to layout.c and hook it up in cli_classic.c.

Corresponding to flashrom svn r1749.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Register locations are different from ICH6, but otherwise appear
to have identical bit specifications and defaults.

Corresponding to flashrom svn r1748.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Follow the style used from ICH7 onwards to pass ich_generation
parameter to lower-level functions on older ICH chipsets too.

Corresponding to flashrom svn r1747.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

ICH2 (and C-ICH)/3/4/5 also have FWH_SEL1/2 registers but at
different addresses. In preparation for implementing fwh_idsel
parsing for older ICH chipsets extract the parameter handling
and add variables for the offsets.

While FWH_DEC_EN1 is a 16bit register for ICH6, it is two separate
8bit registers on ICH5 and earlier. Implement all accesses with two
byte instructions instead, to prepare for extended support.

Corresponding to flashrom svn r1746.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

The only call path where exit was reached was from physmap functions.

Callers of physmap() et al. which were not prepared to handle
ERROR_PTR return values have been adjusted.
physmap_try_ro() has been renamed to physmap_ro() and physmap_common()
slightly refactored due to the now removed *FAIL parameters.

Corresponding to flashrom svn r1745.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

All callers are prepared to handle error if ERROR_PTR is returned.
The Manpage mentioning the respective return code is readapted.

Corresponding to flashrom svn r1744.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

While we don't expect addresses with more than 32 bits here, let's
print the whole possible range for debugging anyway.

Corresponding to flashrom svn r1743.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Make it easier to compile flashrom under NetBSD and DragonFlyBSD:
 - Use /usr/pkg/ as prefix for includes and linking
 - Use pciutils as include path for the right(tm) libpci

Also, fix date handling in getrevision.sh to work with the various formats for
invoking 'date'. This also uses svn's info --xml output instead of the regular one.

Corresponding to flashrom svn r1742.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Also, correct prettyprinting of the registers of the various families,
and abort if SpiAccessMacRomEn or SpiHostAccessRomEn prohibit full access.

Tested reading/writing on ASRock IMB-A180, and chipset detection on
one of each affected generation by Chris Goodrich from Sage.

Corresponding to flashrom svn r1741.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

While flashrom is not as picky on compilers as coreboot, there is still a
high probablilty of breakage when one combines libpayload and distribution
compilers. Print a warning if we detect that to give the daring user a hint
how to resolve the explosions potentially following below it.

Corresponding to flashrom svn r1740.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

These support an additional bit which we did not turn on yet.
Without this patch they decode up to 512 kB, with this up to 1 MB.

Disentangle the enables of unrelated but mostly compatible chipsets
too, add some more debug output and set the max_rom_decode limits.
Also, make warnings really only warnings.

Corresponding to flashrom svn r1739.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Affected chips: M50FLW040A, M50FLW040B, M50FLW080A, M50FLW080B.

Corresponding to flashrom svn r1738.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1737.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

There are two locking strategies used by this umbrella family, one uniform
and one that matches the sector layout of the chip. Refactor the functions
involved and rename the overly complicated file to just stm50.c and the
functions accordingly.

This fixes unlocking of some of the non-uniform chips and gets rid of the
abuse of page_size.

Corresponding to flashrom svn r1736.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Previously we had to rely on dmidecode to decode the DMI/SMBIOS table.
This patch integrates a DMI decoder into flashrom. The old behavior of calling
dmidecode can be brought back by using CONFIG_INTERNAL_DMI=no.

Significant portions of this patch were taken from dmidecode, hence add its
authors to the copyright notice (dmidecode is also GPL2+). We do a few things
differently though. First of all we do more bounds checking to prevent accessing
unmapped memory. We do not support disovery via EFI (yet), but memory
scanning only. We handle the chassis-type lock bit correctly which dmidecode
did not for a long while.

The API to the rest of flashrom remains stable, but the output changes slightly.
To share as much code as possible (which actually is not much), i have added
dmi_fill methods that get called in dmi_init. They are reponsible to fill the
dmi_strings array and setting the is_laptop variable. After it is called, dmi_init
prints all dmi_strings. Previously the strings were printed in the order they were
discovered, followed by the chassis-type, which is now output earlier (in dmi_fill).

Because DJGPP does not support strnlen a simple implementation was added
for it.

This is still only available on x86; actually it is not even compiled in for other
architectures at all anymore.

Corresponding to flashrom svn r1735.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This allows to use the DOS library trees stored in a user-specified directory.

I have mirrored the needed patches, sources and binaries (the latter
are properly licensed to allow that) in the flashrom wiki, so use those
URLs instead of the original sources.

Corresponding to flashrom svn r1734.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This patch replaces Alex Mauer's previous patch for this board (from 2008).
Tested to read, erase, and write on 2 different boards, both with AMIC
A29040BL flash chips, using both stock BIOS and coreboot images.

This patch marks the AMIC chip as tested at the same time.

Corresponding to flashrom svn r1733.
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

The type describes one entry of the whole layout actually.
Using layout_entry_t or something similar would be more correct,
but due to it length we will use "rom" instead of "layout" here and
in upcoming code.

Corresponding to flashrom svn r1732.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Since we are planning to support image files for rom entries, rename the
variable used to count the number of known rom entries to avoid confusion.
There is already num_include_args with similar semantics, hence we use
num_rom_entries.

Corresponding to flashrom svn r1731.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Read_buf_from_file() and write_buf_to_file() use file streams which are
not supported in libpayload.

Corresponding to flashrom svn r1730.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

I had to touch svn directly, where is my reimbursement?

Corresponding to flashrom svn r1729.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

To avoid funny effects of ever changing files tracked by the VCS this patch
moves the manpage data to flashrom.8.tmpl and generates the actual
manpage with a new makefile target if needed.

Corresponding to flashrom svn r1728.
Signed-off-by: Joerg Mayer <jmayer@loplof.de>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

 - remove bashism.
 - simplify some git-related code.
 - improved parameter and error handling.
 - additional -d/--date action which is similar to the timestamp action.
 - support for an optional path parameter.
 - there is only one sane time format.
 - and only one sane date format too.
 - use UTC dates and times only.
 - vastly improve git_url() to print the correct remote url and
   "nearest" branch.
 - remove username from repository URLs.
 - add "-dirty" to local revisions if there are uncommitted changes.
 - indicate in local revisions how many git-only commits were done
   since branching from upstream svn.
 - fix svn_revision() fallback to svn info and remove git-svn.
 - print leading r in script instead of hardcode it in the makefile;
   no more "0.9.7-runknown".
 - make retrieving the upstream revision work even in cloned git-svn
   repositories.
 - more abstractions and helper functions.
 - less fragmentation of actual functionality.

Corresponding to flashrom svn r1727.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Flashrom won't build nor run as native payload very soon (or ever).
This patch changes a special GNU make variable that allows to select
the default goal which is taken if no goal is given explicitly on
the command line. Normally this would be the first rule in Makefile,
i.e. all. This won't compile if the target OS is libpayload, hence
change it to "libflashrom.a" in that case.

This requires two not completely ancient GNU make features:
 - MAKECMDGOALS
 - .DEFAULT_GOAL

Checking for these with ancient-only GNU make features is non-trivial
and hereby postponed.

Corresponding to flashrom svn r1726.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This one is even more strange than the AT45DB chips. Like the AT45DB321C
it does not support any power-of-2 page sizes. There is only one asymmetrical
eraser and that uses two opcodes.

Corresponding to flashrom svn r1725.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

It seems like this model is one-of-a-kind... it shares some properties
with the older versions of the AT45DB series as well as with new ones.

Corresponding to flashrom svn r1724.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1723.
Signed-off-by: Aidan Thornton <makosoft@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1722.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1721.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Thanks to Vadim Girlin for finding out how to do that.
This is known to work on GA-MA770-UD3, GA-B75M-D3V, GA-B75N and
GA-H61M-S1 (only M_BIOS is populated).

Corresponding to flashrom svn r1720.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Damien Zammit <damien@zamaudio.com>
Tested-by: Anton Kochkov <anton.kochkov@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

- Add return values to sp_flush_stream(), sp_pass_writen(),
  sp_execute_opbuf(), sp_execute_opbuf_noflush(),
  sp_check_opbuf_usage(), sp_do_read_n().
- Use those return values to propagate errors instead of exiting.
  In some places this has to wait for core API changes (error handling for
  chip_readb, chip_readn, chip_write) hence comments are added instead.

Corresponding to flashrom svn r1719.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This is mostly a leftover of Niklas' "remove exit call from pcidev_init" patch.
While not explicitly necessary detecting errors early is usually a good idea.

Corresponding to flashrom svn r1718.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

This allows to easily reconfigure a serial port as needed in
the Bus Pirate speedup patch.

Corresponding to flashrom svn r1717.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>