Remove support for driver wcte12xp.

drivers/dahdi/Kbuild

@@ -11,7 +11,6 @@ obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_OCT612X)		+= oct612x/
 obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCT4XXP)		+= wct4xxp/
 obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTC4XXP)		+= wctc4xxp/
 obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTDM24XXP)	+= wctdm24xxp/
-obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTE12XP)		+= wcte12xp/
 obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTE13XP)		+= wcte13xp.o
 
 wcte13xp-objs := wcte13xp-base.o wcxb_spi.o wcxb.o wcxb_flash.o

drivers/dahdi/Kconfig

@@ -146,23 +146,6 @@ config DAHDI_WCTDM24XXP
 
 	  If unsure, say Y.
 
-config DAHDI_WCTE12XP
-	tristate "Digium Wildcard VoiceBus digital card Support"
-	depends on DAHDI && DAHDI_VOICEBUS
-	default DAHDI
-	---help---
-	  This driver provides support for the following Digium
-	  Wildcard products:
-
-  	  * TE120P (PCI/PCI-X)
-	  * TE121 (PCI/PCI-X)
-  	  * TE122 (PCI-E)
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called wcte12xp.
-
-	  If unsure, say Y.
-
 config DAHDI_PCIRADIO
 	tristate "PCI Radio Support"
 	depends on DAHDI && PCI

drivers/dahdi/wcte12xp/Kbuild

-obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTE12XP) += wcte12xp.o
-
-EXTRA_CFLAGS += -I$(src)/.. -Wno-undef
-
-wcte12xp-objs := base.o

drivers/dahdi/wcte12xp/wcte12xp.h

-/*
- * Digium, Inc.  Wildcard TE12xP T1/E1 card Driver
- *
- * Written by Michael Spiceland <mspiceland@digium.com>
- *
- * Adapted from the wctdm24xxp and wcte11xp drivers originally
- * written by Mark Spencer <markster@digium.com>
- *            Matthew Fredrickson <creslin@digium.com>
- *            William Meadows <wmeadows@digium.com>
- *
- * Copyright (C) 2007-2010, Digium, Inc.
- *
- * All rights reserved.
- *
- */
-
-/*
- * See http://www.asterisk.org for more information about
- * the Asterisk project. Please do not directly contact
- * any of the maintainers of this project for assistance;
- * the project provides a web site, mailing lists and IRC
- * channels for your use.
- *
- * This program is free software, distributed under the terms of
- * the GNU General Public License Version 2 as published by the
- * Free Software Foundation. See the LICENSE file included with
- * this program for more details.
- */
-
-#ifndef _WCTE12XP_H
-#define _WCTE12XP_H
-
-/* Comment to disable VPM support */
-#define VPM_SUPPORT 1
-
-#define WC_MAX_IFACES 8
-
-#ifdef VPM_SUPPORT
-#define MAX_TDM_CHAN 31
-#endif
-
-#define SDI_CLK		(0x00010000)
-#define SDI_DOUT	(0x00020000)
-#define SDI_DREAD	(0x00040000)
-#define SDI_DIN		(0x00080000)
-
-#define EFRAME_SIZE	108
-#define ERING_SIZE	16		/* Maximum ring size */
-#define EFRAME_GAP	20
-#define SFRAME_SIZE	((EFRAME_SIZE * DAHDI_CHUNKSIZE) + (EFRAME_GAP * (DAHDI_CHUNKSIZE - 1)))
-
-#define PCI_WINDOW_SIZE ((2 * 2 * 2 * SFRAME_SIZE) + (2 * ERING_SIZE * 4))
-
-#define MAX_COMMANDS 16
-
-#define NUM_EC 4
-
-#define __CMD_PINS (1 << 18)		/* CPLD pin read */
-#define __CMD_LEDS (1 << 19)		/* LED Operation */
-#define __CMD_RD   (1 << 20)		/* Read Operation */
-#define __CMD_WR   (1 << 21)		/* Write Operation */
-
-#define __LED_ORANGE	(1<<3)
-#define __LED_GREEN	(1<<2)
-#define __LED_RED	(1<<1)
-
-#define SET_LED_ORANGE(a) (a | __LED_ORANGE)
-#define SET_LED_RED(a) ((a | __LED_RED) & ~__LED_GREEN)
-#define SET_LED_GREEN(a) ((a | __LED_GREEN) & ~__LED_RED)
-
-#define UNSET_LED_ORANGE(a) (a & ~__LED_ORANGE)
-#define UNSET_LED_REDGREEN(a) (a | __LED_RED | __LED_GREEN)
-
-#define CMD_BYTE(slot, a, is_vpm) (slot*6)+(a*2)+is_vpm /* only even slots */
-//TODO: make a separate macro
-
-enum linemode {
-	T1 = 1,
-	E1,
-	J1,
-};
-
-struct command {
-	struct list_head node;
-	struct completion complete;
-	u8 data;
-	u8 ident;
-	u8 cs_slot;
-	u16 address;
-	u32 flags;
-};
-
-struct vpm150m;
-
-struct t1 {
-	spinlock_t reglock;
-	unsigned char txident;
-	unsigned char rxident;
-	unsigned char statreg; /* bit 0 = vpmadt032 int */
-	struct {
-		unsigned int nmf:1;
-		unsigned int sendingyellow:1;
-	} flags;
-	unsigned char txsigs[16];  /* Copy of tx sig registers */
-	int alarmcount;			/* How much red alarm we've seen */
-	int losalarmcount;
-	int aisalarmcount;
-	int yelalarmcount;
-	const char *variety;
-	char name[80];
-	unsigned long blinktimer;
-	int loopupcnt;
-	int loopdowncnt;
-#define INITIALIZED 1
-#define SHUTDOWN    2
-#define READY	    3
-#define IOERROR	    4
-	unsigned long bit_flags;
-	unsigned long alarmtimer;
-	unsigned char ledstate;
-	unsigned char vpm_check_count;
-	struct dahdi_device *ddev;
-	struct dahdi_span span;						/* Span */
-	struct dahdi_chan *chans[32];					/* Channels */
-	struct dahdi_echocan_state *ec[32];				/* Echocan state for channels */
-#ifdef CONFIG_VOICEBUS_ECREFERENCE
-	struct dahdi_fifo *ec_reference[32];
-#else
-	unsigned char ec_chunk1[32][DAHDI_CHUNKSIZE];
-	unsigned char ec_chunk2[32][DAHDI_CHUNKSIZE];
-#endif
-	unsigned long ctlreg;
-	struct voicebus vb;
-	atomic_t txints;
-	struct vpmadt032 *vpmadt032;
-	struct vpmoct *vpmoct;
-	unsigned long vpm_check;
-	struct work_struct vpm_check_work;
-
-	/* protected by t1.reglock */
-	struct list_head pending_cmds;
-	struct list_head active_cmds;
-	struct timer_list timer;
-	struct work_struct timer_work;
-	struct workqueue_struct *wq;
-	unsigned int not_ready;	/* 0 when entire card is ready to go */
-};
-
-#define t1_info(t1, format, arg...)         \
-	dev_info(&t1->vb.pdev->dev , format , ## arg)
-
-#define t1_notice(t1, format, arg...)         \
-	dev_notice(&t1->vb.pdev->dev , format , ## arg)
-
-/* Maintenance Mode Registers */
-#define LIM0		0x36
-#define LIM0_LL		(1<<1)
-#define LIM1		0x37
-#define LIM1_RL 	(1<<1)
-#define LIM1_JATT	(1<<2)
-
-/* Clear Channel Registers */
-#define CCB1		0x2f
-#define CCB2		0x30
-#define CCB3		0x31
-
-#endif