Commit ee148cc3 authored by DreamSourceLab's avatar DreamSourceLab

Bump version to v1.10

parent a11e8a04
...@@ -106,8 +106,8 @@ set(DS_TITLE DSView) ...@@ -106,8 +106,8 @@ set(DS_TITLE DSView)
set(DS_DESCRIPTION "A GUI for instruments of DreamSourceLab") set(DS_DESCRIPTION "A GUI for instruments of DreamSourceLab")
set(DS_VERSION_MAJOR 1) set(DS_VERSION_MAJOR 1)
set(DS_VERSION_MINOR 0) set(DS_VERSION_MINOR 1)
set(DS_VERSION_MICRO 1) set(DS_VERSION_MICRO 0)
set(DS_VERSION_STRING set(DS_VERSION_STRING
${DS_VERSION_MAJOR}.${DS_VERSION_MINOR}.${DS_VERSION_MICRO} ${DS_VERSION_MAJOR}.${DS_VERSION_MINOR}.${DS_VERSION_MICRO}
) )
......
{ {
"Device": "DSCope", "Device": "DSCope",
"DeviceMode": 1, "DeviceMode": 1,
"Horizontal trigger position": "0", "Horizontal trigger position": "50",
"Language": 25, "Language": 25,
"Operation Mode": "正常", "Operation Mode": "正常",
"Time base": "10000", "Time base": "10000",
......
{ {
"Device": "DSCope", "Device": "DSCope",
"DeviceMode": 1, "DeviceMode": 1,
"Horizontal trigger position": "0", "Horizontal trigger position": "50",
"Language": 31, "Language": 31,
"Operation Mode": "Normal", "Operation Mode": "Normal",
"Time base": "10000", "Time base": "10000",
......
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
"DeviceMode": 1, "DeviceMode": 1,
"Enable RLE Compress": 1, "Enable RLE Compress": 1,
"Filter Targets": "无", "Filter Targets": "无",
"Horizontal trigger position": "0", "Horizontal trigger position": "50",
"Language": 25, "Language": 25,
"Max Height": "1X", "Max Height": "1X",
"Operation Mode": "Stream模式", "Operation Mode": "Stream模式",
......
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
"DeviceMode": 1, "DeviceMode": 1,
"Enable RLE Compress": 1, "Enable RLE Compress": 1,
"Filter Targets": "None", "Filter Targets": "None",
"Horizontal trigger position": "0", "Horizontal trigger position": "50",
"Language": 31, "Language": 31,
"Max Height": "1X", "Max Height": "1X",
"Operation Mode": "Stream Mode", "Operation Mode": "Stream Mode",
......
1.10 -- (2020-02-22)
-----------------
(通用)
*增加DSCope U3P100设备(100M带宽/1G采样率/USB3.0示波器)的支持
*增加DSLogic U3Pro32设备(32通道/1G采样率/USB3.0逻辑分析仪)的支持
*增加DSCope U2B100设备(100M带宽/1G采样率/USB2.0示波器)的支持
*增加DSLogic U3Pro16设备(16通道/1G采样率/USB3.0逻辑分析仪)的支持
*增加设备类型的显示(USB 2.0 / USB 3.0 / 演示设备 / 文件)
*增加FPGA固件版本check
*改进文件保存的默认名称和路径记忆
*修复一些显示和界面语言问题
(逻辑分析仪)
*扩展触发通道,支持到最高32通道
*修复PS/2协议的解析问题(#239)
*修复cec协议的解析问题(#235)
*修复解码文件导出的ID问题(#237)
*修复高级触发的取反逻辑无法正常工作的问题
*修复其它显示问题
(示波器)
*改进高频信号触发的波形抖动问题
*修复降采样时,采样点选取错误的问题
*增加20M带宽限制选项(仅DSCope U2B100和DSCope U3P100设备)
*改进数据捕获和波形显示的同步方式
*修复stop条件下,改变垂直灵敏度和偏移可能导致波形显示和测量结果不正确的问题
*修复roll模式下,改变垂直偏移导致波形重头开始采集的问题
*修复在等待触发的条件下,math通道的水平分辨率无法改变的问题
*修复在等待触发的条件下,已采集的波形无法改变垂直偏移的问题
*修复自动测量的参数未自动清除,以及显示的抖动问题
*修复光标和鼠标跟随测量,在某些条件下显示不正确的问题
*修复某些条件下切换触发源,可能导致波形无法正常触发的问题
(数据记录仪)
*修复垂直偏移没有和硬件设置同步的问题
*修复某些极端情况下,大量波形压缩显示时可能出现的问题
*增加波形结果的鼠标跟随测量
1.01 -- (2019-09-15) 1.01 -- (2019-09-15)
----------------- -----------------
(通用) (通用)
......
1.10 -- (2020-02-22)
-----------------
--common
*add support for DSCope U3P100 device (100M bandwidth/1G samplerate/USB3.0 oscilloscope)
*add support for DSLogic U3Pro32 device (32 channels/1G samplerate/USB3.0 logic analyzer)
*add support for DSCope U2B100 device (100M bandwidth/1G samplerate/USB2.0 oscilloscope)
*add support for DSLogic U3Pro16 device (16 channels/1G samplerate/USB3.0 logic analyzer)
*add display of device type (USB 2.0 / USB 3.0 / Demo / File)
*add version check for FPGA firmware
*improve the default file name when saving/exporting files
*fix other display and language issue
--for logic analyzer
*extend channel support for trigger up to 32 channels
*fix issue of ps/2 decoder (#239)
*fix issue of cec decoder (#235)
*fix ID issue when export results of decoder (#237)
*fix "not" logic don't work in advance trigger
*fix other display issues
--for oscilloscope
*improve wave shake issue when trig high freqency signals
*fix sampling point selection issue of downsampling
*add 20M bandwidth limitation for DSCope U2B100 / DSCope U3P100 devices
*improve synchronism between data acquisition and wave dispaly
*fix wave display and measurement issue when change vdiv and offset after stop
*fix capture restart issue when change offset in roll mode
*fix issue of timebase of math channel can't be changed when waiting trigger
*fix issue of offset can't be changed when waiting trigger
*fix clear and flicker issue of auto measurements
*fix cursor and mouse measurements issue after change samplerate when waiting trigger
*fix trigger issue when toggle between different trigger source
--for data acquisiton
*fix hardware offset setting issue
*fix mipmap issue of long time data at some case
*add cursor and mouse measurements
1.01 -- (2019-09-15) 1.01 -- (2019-09-15)
----------------- -----------------
--common --common
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment