Commit b3d7fba8 authored by Hatim Kanchwala's avatar Hatim Kanchwala Committed by Stefan Tauner

Add support for ESI ES25P40, ES25P80 and ES25P16

Corresponding to flashrom svn r1923.
Signed-off-by: default avatarHatim Kanchwala <hatim@hatimak.me>
Acked-by: default avatarStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
parent d1ca1e89
......@@ -5352,6 +5352,99 @@ const struct flashchip flashchips[] = {
.voltage = {2700, 3600},
},
{
.vendor = "ESI",
.name = "ES25P40",
.bustype = BUS_SPI,
.manufacture_id = EXCEL_ID_NOPREFIX,
.model_id = EXCEL_ES25P40,
.total_size = 512,
.page_size = 256,
/* 256-byte paramter page separate from memory array:
* supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast Read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "ESI",
.name = "ES25P80",
.bustype = BUS_SPI,
.manufacture_id = EXCEL_ID_NOPREFIX,
.model_id = EXCEL_ES25P80,
.total_size = 1024,
.page_size = 256,
/* 256-byte paramter page separate from memory array:
* supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast Read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "ESI",
.name = "ES25P16",
.bustype = BUS_SPI,
.manufacture_id = EXCEL_ID_NOPREFIX,
.model_id = EXCEL_ES25P16,
.total_size = 2 * 1024,
.page_size = 256,
/* 256-byte paramter page separate from memory array:
* supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast Read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Fujitsu",
.name = "MBM29F004BC",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment