Commit 6800c953 authored by Todd Broch's avatar Todd Broch Committed by Stefan Tauner

ft2232_spi: Add support for Google Servo boards (v1 + v2)

This patch has been cherry-picked from various patches in the chromiumos
tree denoted below.

Change-Id: I4b679e23ab37a4357b1e3d23f6f65a1c31f7d71a
Change-Id: Ibda56201ab4519315431c08206c61ceffb7c7e65
Change-Id: I540ad2d304dc69a7c79ca154beb744ef947ff808

Servo V2 has two FT4232H parts. The first one (denoted 'legacy') is
dedicated to supporting orginal Servo V1 functionality. The second,
residing at USB ID 0x18d1:5003 provides two other SPI interfaces on
port A and B respectively.

Additional changes by Alexandru Gagniuc, Hatim Kanchwala and Urja Rannikko:

 - The clock divisor is set to '6', as this creates a 10MHz SPI clock,
   which is the same SPI clock that the chromiumos branch produced.
 - Add udev rule for Google servo boards to util/flashrom.rules.
 - Add Google servo entry to manpage.

Corresponding to flashrom svn r1925.
Signed-off-by: default avatarTodd Broch <tbroch@chromium.org>
Signed-off-by: default avatarAlexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: default avatarHatim Kanchwala <hatim@hatimak.me>
Signed-off-by: default avatarUrja Rannikko <urjaman@gmail.com>
Acked-by: default avatarHatim Kanchwala <hatim@hatimak.me>
Acked-by: default avatarUrja Rannikko <urjaman@gmail.com>
Acked-by: default avatarStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
parent e5dcc15b
......@@ -242,7 +242,7 @@ based USB SPI programmer), including the DLP Design DLP-USB1232H, \
FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec \
JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \
Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB
Multi-Protocol Adapter (TUMPA), TUMPA Lite, and GOEPEL PicoTAP.
Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP and Google Servo v1/v2.
.sp
.BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog, \
including Arduino-based devices as well as various programmers by Urja Rannikko, \
......@@ -701,7 +701,8 @@ syntax where
can be
.BR 2232H ", " 4232H ", " 232H ", " jtagkey ", " busblaster ", " openmoko ", " \
arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd ", " arm-usb-ocd-h \
", " tumpa ", " tumpalite ", or " picotap
", " tumpa ", " tumpalite ", " picotap ", " google-servo ", " google-servo-v2 \
" or " google-servo-v2-legacy
and
.B interface
can be
......
......@@ -58,6 +58,11 @@
#define OLIMEX_ARM_OCD_H_PID 0x002B
#define OLIMEX_ARM_TINY_H_PID 0x002A
#define GOOGLE_VID 0x18D1
#define GOOGLE_SERVO_PID 0x5001
#define GOOGLE_SERVO_V2_PID0 0x5002
#define GOOGLE_SERVO_V2_PID1 0x5003
const struct dev_entry devs_ft2232spi[] = {
{FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"},
{FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"},
......@@ -66,6 +71,9 @@ const struct dev_entry devs_ft2232spi[] = {
{FTDI_VID, TIAO_TUMPA_LITE_PID, OK, "TIAO", "USB Multi-Protocol Adapter Lite"},
{FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"},
{GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"},
{GOOGLE_VID, GOOGLE_SERVO_PID, OK, "Google", "Servo"},
{GOOGLE_VID, GOOGLE_SERVO_V2_PID0, OK, "Google", "Servo V2 Legacy"},
{GOOGLE_VID, GOOGLE_SERVO_V2_PID1, OK, "Google", "Servo V2"},
{FIC_VID, OPENMOKO_DBGBOARD_PID, OK, "FIC", "OpenMoko Neo1973 Debug board (V2+)"},
{OLIMEX_VID, OLIMEX_ARM_OCD_PID, OK, "Olimex", "ARM-USB-OCD"},
{OLIMEX_VID, OLIMEX_ARM_TINY_PID, OK, "Olimex", "ARM-USB-TINY"},
......@@ -254,6 +262,17 @@ int ft2232_spi_init(void)
ft2232_vid = OLIMEX_VID;
ft2232_type = OLIMEX_ARM_TINY_H_PID;
channel_count = 2;
} else if (!strcasecmp(arg, "google-servo")) {
ft2232_vid = GOOGLE_VID;
ft2232_type = GOOGLE_SERVO_PID;
} else if (!strcasecmp(arg, "google-servo-v2")) {
ft2232_vid = GOOGLE_VID;
ft2232_type = GOOGLE_SERVO_V2_PID1;
/* Default divisor is too fast, and chip ID fails */
divisor = 6;
} else if (!strcasecmp(arg, "google-servo-v2-legacy")) {
ft2232_vid = GOOGLE_VID;
ft2232_type = GOOGLE_SERVO_V2_PID0;
} else {
msg_perr("Error: Invalid device type specified.\n");
free(arg);
......
......@@ -60,6 +60,12 @@ ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6011", MODE="664", GROUP="plugdev"
# http://www.goepel.com/jtagboundary-scan/hardware/picotap.html
ATTRS{idVendor}=="096c", ATTRS{idProduct}=="1449", MODE="664", GROUP="plugdev"
# Google servo debug board
# https://www.chromium.org/chromium-os/servo
ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="5001", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="5002", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="5003", MODE="664", GROUP="plugdev"
# Olimex ARM-USB-OCD
# http://olimex.com/dev/arm-usb-ocd.html
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="0003", MODE="664", GROUP="plugdev"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment