Commit 3c659039 authored by Timothy Pearson's avatar Timothy Pearson

Initial MX25L25635F support

Change-Id: I292e12d92cdf3961b8d47492a1d5679ff1ea21ce
Signed-off-by: Timothy Pearson's avatarTimothy Pearson <tpearson@raptorengineering.com>
parent ad5ce3b6
...@@ -8043,6 +8043,53 @@ const struct flashchip flashchips[] = { ...@@ -8043,6 +8043,53 @@ const struct flashchip flashchips[] = {
.voltage = {2700, 3600}, .voltage = {2700, 3600},
}, },
{
.vendor = "Macronix",
.name = "MX25L25635F/MX25L25645E/MX25L25665E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L25635F,
.total_size = 32768,
.page_size = 256,
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_SUPPORT,
.four_bytes_addr_funcs =
{
.enter_4ba = spi_enter_4ba_b7, /* enter 4-bytes addressing mode by CMD B7 */
.read_nbyte = spi_nbyte_read_4ba, /* read from 4-bytes addressing mode */
.program_byte = spi_byte_program_4ba, /* write from 4-bytes addressing mode */
.program_nbyte = spi_nbyte_program_4ba /* write from 4-bytes addressing mode */
},
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_20_4ba,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_52_4ba,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_d8_4ba,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{ {
.vendor = "Macronix", .vendor = "Macronix",
.name = "MX25U1635E", .name = "MX25U1635E",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment