diff --git a/MAINTAINERS b/MAINTAINERS
index 250dc970c62d03e59d6053e7ac346a4364f3f600..0fda00f398495db4595e040ee5e3c2e4ccbac635 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7624,7 +7624,7 @@ F: drivers/clk/spear/
SPI SUBSYSTEM
M: Mark Brown <broonie@kernel.org>
M: Grant Likely <grant.likely@linaro.org>
-L: spi-devel-general@lists.sourceforge.net
+L: linux-spi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
S: Maintained
diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c
index 60cfae51c713818ef630f802db2e2e8c747f98d7..eab593eaaafa00f1c269dda9f60a70de72f1d98b 100644
--- a/drivers/spi/spi-sh-hspi.c
+++ b/drivers/spi/spi-sh-hspi.c
@@ -89,7 +89,7 @@ static int hspi_status_check_timeout(struct hspi_priv *hspi, u32 mask, u32 val)
if ((mask & hspi_read(hspi, SPSR)) == val)
return 0;
- msleep(20);
+ udelay(10);
}
dev_err(hspi->dev, "timeout\n");
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 35f60bd252dda9e6ce61d474cf317eb301c85ff4..637d728fbeb5b3d2c573baf5c19c72e6dd542a3d 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -1487,7 +1487,7 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev)
return 0;
err_spi_register_master:
- free_irq(board_dat->pdev->irq, board_dat);
+ free_irq(board_dat->pdev->irq, data);
err_request_irq:
pch_spi_free_resources(board_dat, data);
err_spi_get_resources:
@@ -1667,6 +1667,7 @@ static int pch_spi_probe(struct pci_dev *pdev,
pd_dev = platform_device_alloc("pch-spi", i);
if (!pd_dev) {
dev_err(&pdev->dev, "platform_device_alloc failed\n");
+ retval = -ENOMEM;
goto err_platform_device;
}
pd_dev_save->pd_save[i] = pd_dev;
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index e1d7696074253d9a76a1c1744ad94f973ba96616..34d18dcfa0db3c4da739129b1d1008f18ee06cfc 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -267,7 +267,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
u32 ipif_ier;
- u16 cr;
/* We get here with transmitter inhibited */
@@ -276,7 +275,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
xspi->remaining_bytes = t->len;
INIT_COMPLETION(xspi->done);
- xilinx_spi_fill_tx_fifo(xspi);
/* Enable the transmit empty interrupt, which we use to determine
* progress on the transmission.
@@ -285,12 +283,41 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY,
xspi->regs + XIPIF_V123B_IIER_OFFSET);
- /* Start the transfer by not inhibiting the transmitter any longer */
- cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) &
- ~XSPI_CR_TRANS_INHIBIT;
- xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
+ for (;;) {
+ u16 cr;
+ u8 sr;
+
+ xilinx_spi_fill_tx_fifo(xspi);
+
+ /* Start the transfer by not inhibiting the transmitter any
+ * longer
+ */
+ cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) &
+ ~XSPI_CR_TRANS_INHIBIT;
+ xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
+
+ wait_for_completion(&xspi->done);
+
+ /* A transmit has just completed. Process received data and
+ * check for more data to transmit. Always inhibit the
+ * transmitter while the Isr refills the transmit register/FIFO,
+ * or make sure it is stopped if we're done.
+ */
+ cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
+ xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
+ xspi->regs + XSPI_CR_OFFSET);
+
+ /* Read out all the data from the Rx FIFO */
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
+ while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) {
+ xspi->rx_fn(xspi);
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
+ }
- wait_for_completion(&xspi->done);
+ /* See if there is more data to send */
+ if (!xspi->remaining_bytes > 0)
+ break;
+ }
/* Disable the transmit empty interrupt */
xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET);
@@ -314,38 +341,7 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET);
if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */
- u16 cr;
- u8 sr;
-
- /* A transmit has just completed. Process received data and
- * check for more data to transmit. Always inhibit the
- * transmitter while the Isr refills the transmit register/FIFO,
- * or make sure it is stopped if we're done.
- */
- cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
- xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
- xspi->regs + XSPI_CR_OFFSET);
-
- /* Read out all the data from the Rx FIFO */
- sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
- while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) {
- xspi->rx_fn(xspi);
- sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
- }
-
- /* See if there is more data to send */
- if (xspi->remaining_bytes > 0) {
- xilinx_spi_fill_tx_fifo(xspi);
- /* Start the transfer by not inhibiting the
- * transmitter any longer
- */
- xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
- } else {
- /* No more data to send.
- * Indicate the transfer is completed.
- */
- complete(&xspi->done);
- }
+ complete(&xspi->done);
}
return IRQ_HANDLED;