diff --git a/Makefile b/Makefile
index 501f65a14b508c94c49d8cfe9ec684a1d475208a..6f6ee831f966a42e649c552faa559aa56c0a795f 100644
--- a/Makefile
+++ b/Makefile
@@ -96,6 +96,9 @@ CONFIG_DRKAISER ?= yes
 # Always enable Bus Pirate SPI for now.
 CONFIG_BUSPIRATESPI ?= yes
 
+# Disable Dediprog SF100 until support is complete and tested.
+CONFIG_DEDIPROG ?= no
+
 # Disable wiki printing by default. It is only useful if you have wiki access.
 CONFIG_PRINT_WIKI ?= no
 
@@ -160,6 +163,12 @@ FEATURE_CFLAGS += -D'BUSPIRATE_SPI_SUPPORT=1'
 PROGRAMMER_OBJS += buspirate_spi.o
 endif
 
+ifeq ($(CONFIG_DEDIPROG), yes)
+FEATURE_CFLAGS += -D'DEDIPROG_SUPPORT=1'
+FEATURE_LIBS += -lusb
+PROGRAMMER_OBJS += dediprog.o
+endif
+
 # Ugly, but there's no elif/elseif.
 ifeq ($(CONFIG_SERPROG), yes)
 LIB_OBJS += serial.o
diff --git a/dediprog.c b/dediprog.c
new file mode 100644
index 0000000000000000000000000000000000000000..3020c0068f822dcd254ffc9c5b871e9c224431e9
--- /dev/null
+++ b/dediprog.c
@@ -0,0 +1,388 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2010 Carl-Daniel Hailfinger
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <sys/types.h>
+#include <usb.h>
+#include "flash.h"
+#include "spi.h"
+
+#define DEFAULT_TIMEOUT 3000
+usb_dev_handle *dediprog_handle;
+
+int dediprog_do_stuff(void);
+
+void print_hex(void *buf, size_t len)
+{
+	size_t i;
+
+	for (i = 0; i < len; i++)
+		msg_pdbg(" %02x", ((uint8_t *)buf)[i]);
+}
+
+struct usb_device *get_device_by_vid_pid(uint16_t vid, uint16_t pid)
+{
+	struct usb_bus *bus;
+	struct usb_device *dev;
+
+	for (bus = usb_get_busses(); bus; bus = bus->next)
+		for (dev = bus->devices; dev; dev = dev->next)
+			if ((dev->descriptor.idVendor == vid) &&
+			    (dev->descriptor.idProduct == pid))
+				return dev;
+
+	return NULL;
+}
+
+//int usb_control_msg(usb_dev_handle *dev, int requesttype, int request, int value, int index, char *bytes, int size, int timeout);
+
+int dediprog_set_spi_voltage(uint16_t voltage)
+{
+	int ret;
+	unsigned int mv;
+
+	switch (voltage) {
+	case 0x0:
+		/* Admittedly this one is an assumption. */
+		mv = 0;
+		break;
+	case 0x12:
+		mv = 1800;
+		break;
+	case 0x11:
+		mv = 2500;
+		break;
+	case 0x10:
+		mv = 3500;
+		break;
+	default:
+		msg_perr("Unknown voltage selector 0x%x! Aborting.\n", voltage);
+		return 1;
+	}
+	msg_pdbg("Setting SPI voltage to %u.%03u V\n", mv / 1000, mv % 1000);
+
+	ret = usb_control_msg(dediprog_handle, 0x42, 0x9, voltage, 0xff, NULL, 0x0, DEFAULT_TIMEOUT);
+	if (ret != 0x0) {
+		msg_perr("Command Set SPI Voltage 0x%x failed!\n", voltage);
+		return 1;
+	}
+	return 0;
+}
+
+/* After dediprog_set_spi_speed, the original app always calls
+ * dediprog_set_spi_voltage(0) and then
+ * dediprog_check_devicestring() four times in a row.
+ * After that, dediprog_command_a() is called.
+ * This looks suspiciously like the microprocessor in the SF100 has to be
+ * restarted/reinitialized in case the speed changes.
+ */
+int dediprog_set_spi_speed(uint16_t speed)
+{
+	int ret;
+	unsigned int khz;
+
+	/* Case 1 and 2 are in weird order. Probably an organically "grown"
+	 * interface.
+	 * Base frequency is 24000 kHz, divisors are (in order)
+	 * 1, 3, 2, 8, 11, 16, 32, 64.
+	 */
+	switch (speed) {
+	case 0x0:
+		khz = 24000;
+		break;
+	case 0x1:
+		khz = 8000;
+		break;
+	case 0x2:
+		khz = 12000;
+		break;
+	case 0x3:
+		khz = 3000;
+		break;
+	case 0x4:
+		khz = 2180;
+		break;
+	case 0x5:
+		khz = 1500;
+		break;
+	case 0x6:
+		khz = 750;
+		break;
+	case 0x7:
+		khz = 375;
+		break;
+	default:
+		msg_perr("Unknown frequency selector 0x%x! Aborting.\n", speed);
+		return 1;
+	}
+	msg_pdbg("Setting SPI speed to %u kHz\n", khz);
+
+	ret = usb_control_msg(dediprog_handle, 0x42, 0x61, speed, 0xff, NULL, 0x0, DEFAULT_TIMEOUT);
+	if (ret != 0x0) {
+		msg_perr("Command Set SPI Speed 0x%x failed!\n", speed);
+		return 1;
+	}
+	return 0;
+}
+
+int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len)
+{
+	/* Maximum read length is 4 bytes for now. */
+	return spi_read_chunked(flash, buf, start, len, 4);
+}
+
+int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt,
+			const unsigned char *writearr, unsigned char *readarr)
+{
+	int ret;
+
+	/* Paranoid, but I don't want to be blamed if anything explodes. */
+	if ((writecnt != 1) && (writecnt != 4))
+		msg_perr("Untested writecnt=%i, aborting.\n", writecnt);
+	if (readcnt > 4)
+		msg_perr("Untested readcnt=%i, aborting.\n", readcnt);
+	if ((readcnt == 0) && (writecnt != 1))
+		msg_perr("Untested writecnt=%i, readcnt=%i combination, "
+			 "aborting.\n", writecnt, readcnt);
+	
+	ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0xff, readcnt ? 0x1 : 0x0, (char *)writearr, writecnt, DEFAULT_TIMEOUT);
+	if (ret != writecnt) {
+		msg_perr("Command Send SPI failed, ret=%i, expected %i!\n",
+			 ret, writecnt);
+		return 1;
+	}
+	if (!readcnt)
+		return 0;
+	memset(readarr, 0, readcnt);
+	ret = usb_control_msg(dediprog_handle, 0xc2, 0x01, 0xbb8, 0x0000, (char *)readarr, readcnt, DEFAULT_TIMEOUT);
+	if (ret != readcnt) {
+		msg_perr("Command Receive SPI failed, ret=%i, expected %i!\n",
+			 ret, readcnt);
+		return 1;
+	}
+	return 0;
+}
+
+int dediprog_check_devicestring(void)
+{
+	int ret;
+	char buf[0x11];
+
+	/* Command Prepare Receive Device String. */
+	memset(buf, 0, sizeof(buf));
+	ret = usb_control_msg(dediprog_handle, 0xc3, 0x7, 0x0, 0xef03, buf, 0x1, DEFAULT_TIMEOUT);
+	/* The char casting is needed to stop gcc complaining about an always true comparison. */
+	if ((ret != 0x1) || (buf[0] != (char)0xff)) {
+		msg_perr("Unexpected response to Command Prepare Receive Device"
+			 " String!\n");
+		return 1;
+	}
+	/* Command Receive Device String. */
+	memset(buf, 0, sizeof(buf));
+	ret = usb_control_msg(dediprog_handle, 0xc2, 0x8, 0xff, 0xff, buf, 0x10, DEFAULT_TIMEOUT);
+	if (ret != 0x10) {
+		msg_perr("Incomplete/failed Command Receive Device String!\n");
+		return 1;
+	}
+	buf[0x10] = '\0';
+	msg_pdbg("Found a %s\n", buf);
+	if (memcmp(buf, "SF100", 0x5)) {
+		msg_perr("Device not a SF100!\n");
+		return 1;
+	}
+	/* Only these versions were tested. */
+	if (memcmp(buf, "SF100   V:2.1.1 ", 0x10) &&
+	    memcmp(buf, "SF100   V:3.1.8 ", 0x10)) {
+		msg_perr("Unexpected firmware version!\n");
+		return 1;
+	}
+	return 0;
+}
+
+/* Command A seems to be some sort of device init. It is either followed by
+ * dediprog_check_devicestring (often) or Command A (often) or
+ * Command F (once).
+ */
+int dediprog_command_a(void)
+{
+	int ret;
+	char buf[0x1];
+
+	memset(buf, 0, sizeof(buf));
+	ret = usb_control_msg(dediprog_handle, 0xc3, 0xb, 0x0, 0x0, buf, 0x1, DEFAULT_TIMEOUT);
+	if ((ret != 0x1) || (buf[0] != 0x6f)) {
+		msg_perr("Unexpected response to Command A!\n");
+		return 1;
+	}
+	return 0;
+}
+
+/* Command C is only sent after dediprog_check_devicestring, but not after every
+ * invocation of dediprog_check_devicestring. It is only sent after the first
+ * dediprog_command_a(); dediprog_check_devicestring() sequence in each session.
+ * I'm tempted to call this one start_SPI_engine or finish_init.
+ */
+int dediprog_command_c(void)
+{
+	int ret;
+
+	ret = usb_control_msg(dediprog_handle, 0x42, 0x4, 0x0, 0x0, NULL, 0x0, DEFAULT_TIMEOUT);
+	if (ret != 0x0) {
+		msg_perr("Unexpected response to Command C!\n");
+		return 1;
+	}
+	return 0;
+}
+
+/* Very strange. Seems to be a programmer keepalive or somesuch.
+ * Wait unsuccessfully for timeout ms to read one byte.
+ * Is usually called after setting voltage to 0.
+ */
+int dediprog_command_f(int timeout)
+{
+	int ret;
+	char buf[0x1];
+
+	memset(buf, 0, sizeof(buf));
+	ret = usb_control_msg(dediprog_handle, 0xc2, 0x11, 0xff, 0xff, buf, 0x1, timeout);
+	if (ret != 0x0) {
+		msg_perr("Unexpected response to Command F!\n");
+		return 1;
+	}
+	return 0;
+}
+
+/* URB numbers refer to the first log ever captured. */
+int dediprog_init(void)
+{
+	struct usb_device *dev;
+
+	msg_pspew("%s\n", __func__);
+
+	/* Here comes the USB stuff. */
+	usb_init();
+	usb_find_busses();
+	usb_find_devices();
+	dev = get_device_by_vid_pid(0x0483, 0xdada);
+	if (!dev) {
+		msg_perr("Could not find a Dediprog SF100 on USB!\n");
+		return 1;
+	}
+	msg_pdbg("Found USB device (%04x:%04x).\n",
+		 dev->descriptor.idVendor,
+		 dev->descriptor.idProduct);
+	dediprog_handle = usb_open(dev);
+	/* URB 6. Command A. */
+	if (dediprog_command_a())
+		return 1;
+	/* URB 7. Command A. */
+	if (dediprog_command_a())
+		return 1;
+	/* URB 8. Command Prepare Receive Device String. */
+	/* URB 9. Command Receive Device String. */
+	if (dediprog_check_devicestring())
+		return 1;
+	/* URB 10. Command C. */
+	if (dediprog_command_c())
+		return 1;
+	/* URB 11. Command Set SPI Voltage. */
+	if (dediprog_set_spi_voltage(0x10))
+		return 1;
+
+	buses_supported = CHIP_BUSTYPE_SPI;
+	spi_controller = SPI_CONTROLLER_DEDIPROG;
+
+	/* RE leftover, leave in until the driver is complete. */
+#if 0
+	/* Execute RDID by hand if you want to test it. */
+	dediprog_do_stuff();
+#endif
+
+	return 0;
+}
+
+/* Leftovers from reverse engineering. Keep for documentation purposes until
+ * completely understood.
+ */
+int dediprog_do_stuff(void)
+{
+	char buf[0x4];
+	/* SPI command processing starts here. */
+
+	/* URB 12. Command Send SPI. */
+	/* URB 13. Command Receive SPI. */
+	memset(buf, 0, sizeof(buf));
+	/* JEDEC RDID */
+	msg_pdbg("Sending RDID\n");
+	buf[0] = JEDEC_RDID;
+	if (dediprog_spi_send_command(JEDEC_RDID_OUTSIZE, JEDEC_RDID_INSIZE, (unsigned char *)buf, (unsigned char *)buf))
+		return 1;
+	msg_pdbg("Receiving response: ");
+	print_hex(buf, JEDEC_RDID_INSIZE);
+#if 0
+	/* URB 14-27 are more SPI commands. */
+	/* URB 28. Command Set SPI Voltage. */
+	if (dediprog_set_spi_voltage(0x0))
+		return 1;
+	/* URB 29-38. Command F, unsuccessful wait. */
+	if (dediprog_command_f(544))
+		return 1;
+	/* URB 39. Command Set SPI Voltage. */
+	if (dediprog_set_spi_voltage(0x10))
+		return 1;
+	/* URB 40. Command Set SPI Speed. */
+	if (dediprog_set_spi_speed(0x2))
+		return 1;
+	/* URB 41 is just URB 28. */
+	/* URB 42,44,46,48,51,53 is just URB 8. */
+	/* URB 43,45,47,49,52,54 is just URB 9. */
+	/* URB 50 is just URB 6/7. */
+	/* URB 55-131 is just URB 29-38. (wait unsuccessfully for 4695 (maybe 4751) ms)*/
+	/* URB 132,134 is just URB 6/7. */
+	/* URB 133 is just URB 29-38. */
+	/* URB 135 is just URB 8. */
+	/* URB 136 is just URB 9. */
+	/* URB 137 is just URB 11. */
+
+	/* Command I is probably Start Bulk Read. Data is u16 blockcount, u16 blocksize. */
+	/* Command J is probably Start Bulk Write. Data is u16 blockcount, u16 blocksize. */
+	/* Bulk transfer sizes for Command I/J are always 512 bytes, rest is filled with 0xff. */
+#endif	
+
+	msg_pinfo("All probes will fail because this driver is not hooked up "
+		  "to the SPI infrastructure yet.");
+	return 0;
+}
+
+int dediprog_shutdown(void)
+{
+	msg_pspew("%s\n", __func__);
+
+	/* URB 28. Command Set SPI Voltage to 0. */
+	if (dediprog_set_spi_voltage(0x0))
+		return 1;
+
+	if (usb_close(dediprog_handle)) {
+		msg_perr("Couldn't close USB device!\n");
+		return 1;
+	}
+	return 0;
+}
diff --git a/flash.h b/flash.h
index 9a25c70765562705072e7e630350087feee12e47..65fa685edcb6b8c4e2b74ffa1aa5a18985a179f4 100644
--- a/flash.h
+++ b/flash.h
@@ -66,6 +66,9 @@ enum programmer {
 #endif
 #if BUSPIRATE_SPI_SUPPORT == 1
 	PROGRAMMER_BUSPIRATESPI,
+#endif
+#if DEDIPROG_SUPPORT == 1
+	PROGRAMMER_DEDIPROG,
 #endif
 	PROGRAMMER_INVALID /* This must always be the last entry. */
 };
@@ -470,6 +473,12 @@ int buspirate_spi_shutdown(void);
 int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr);
 int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
 
+/* dediprog.c */
+int dediprog_init(void);
+int dediprog_shutdown(void);
+int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr);
+int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
+
 /* flashrom.c */
 extern enum chipbustype buses_supported;
 struct decode_sizes {
@@ -552,6 +561,9 @@ enum spi_controller {
 #endif
 #if BUSPIRATE_SPI_SUPPORT == 1
 	SPI_CONTROLLER_BUSPIRATE,
+#endif
+#if DEDIPROG_SUPPORT == 1
+	SPI_CONTROLLER_DEDIPROG,
 #endif
 	SPI_CONTROLLER_INVALID /* This must always be the last entry. */
 };
diff --git a/flashrom.c b/flashrom.c
index bba7a3a536e9833c8efd93a99a71b511968cc9fb..c3e32a1f4513b26c4aa4cb30ec62471835571374 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -44,7 +44,7 @@ enum programmer programmer = PROGRAMMER_DUMMY;
  * if more than one of them is selected. If only one is selected, it is clear
  * that the user wants that one to become the default.
  */
-#if NIC3COM_SUPPORT+GFXNVIDIA_SUPPORT+DRKAISER_SUPPORT+SATASII_SUPPORT+FT2232_SPI_SUPPORT+SERPROG_SUPPORT+BUSPIRATE_SPI_SUPPORT > 1
+#if NIC3COM_SUPPORT+GFXNVIDIA_SUPPORT+DRKAISER_SUPPORT+SATASII_SUPPORT+FT2232_SPI_SUPPORT+SERPROG_SUPPORT+BUSPIRATE_SPI_SUPPORT+DEDIPROG_SUPPORT > 1
 #error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all external programmers except one.
 #endif
 enum programmer programmer =
@@ -69,6 +69,9 @@ enum programmer programmer =
 #if BUSPIRATE_SPI_SUPPORT == 1
 	PROGRAMMER_BUSPIRATESPI
 #endif
+#if DEDIPROG_SUPPORT == 1
+	PROGRAMMER_DEDIPROG
+#endif
 ;
 #endif
 
@@ -283,6 +286,25 @@ const struct programmer_entry programmer_table[] = {
 	},
 #endif
 
+#if DEDIPROG_SUPPORT == 1
+	{
+		.name			= "dediprog",
+		.init			= dediprog_init,
+		.shutdown		= dediprog_shutdown,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.chip_readb		= noop_chip_readb,
+		.chip_readw		= fallback_chip_readw,
+		.chip_readl		= fallback_chip_readl,
+		.chip_readn		= fallback_chip_readn,
+		.chip_writeb		= noop_chip_writeb,
+		.chip_writew		= fallback_chip_writew,
+		.chip_writel		= fallback_chip_writel,
+		.chip_writen		= fallback_chip_writen,
+		.delay			= internal_delay,
+	},
+#endif
+
 	{}, /* This entry corresponds to PROGRAMMER_INVALID. */
 };
 
diff --git a/spi.c b/spi.c
index 685c917dff5f7438d6c4fc67c6c37f3a7d2738f9..aaf7d88b5cb15b00174d55cff7fbdfff7e881284 100644
--- a/spi.c
+++ b/spi.c
@@ -111,6 +111,15 @@ const struct spi_programmer spi_programmer[] = {
 	},
 #endif
 
+#if DEDIPROG_SUPPORT == 1
+	{ /* SPI_CONTROLLER_DEDIPROG */
+		.command = dediprog_spi_send_command,
+		.multicommand = default_spi_send_multicommand,
+		.read = dediprog_spi_read,
+		.write_256 = spi_chip_write_1,
+	},
+#endif
+
 	{}, /* This entry corresponds to SPI_CONTROLLER_INVALID. */
 };