Commit 4b721ede authored by Shinken Sanada's avatar Shinken Sanada Committed by Florent Kermarrec

add QmTech Wukong board support.

parent 9beaf258
#
# This file is part of LiteX-Boards.
#
# Copyright (c) 2020 Shinken Sanada <sanadashinken@gmail.com>
# SPDX-License-Identifier: BSD-2-Clause
from litex.build.generic_platform import *
from litex.build.xilinx import XilinxPlatform
from litex.build.openocd import OpenOCD
# IOs ----------------------------------------------------------------------------------------------
_io = [
# Clk / Rst
("clk50", 0, Pins("M22"), IOStandard("LVCMOS33")),
("sys_reset", 0, Pins("J8"), IOStandard("LVCMOS33")),
# Leds
("user_led", 0, Pins("J6"), IOStandard("LVCMOS33")),
("user_led", 1, Pins("H6"), IOStandard("LVCMOS33")),
# Buttons
("key0", 0, Pins("H7"), IOStandard("LVCMOS33")),
# Serial
("serial", 0,
Subsignal("tx", Pins("E3")),
Subsignal("rx", Pins("F3")),
IOStandard("LVCMOS33"),
),
# SPIFlash
("spiflash", 0,
Subsignal("cs_n", Pins("P18")),
Subsignal("clk", Pins("H13")),
Subsignal("mosi", Pins("R14")),
Subsignal("miso", Pins("R15")),
Subsignal("wp", Pins("P14")),
Subsignal("hold", Pins("N14")),
IOStandard("LVCMOS33"),
),
("spiflash4x", 0,
Subsignal("cs_n", Pins("P18")),
Subsignal("clk", Pins("H13")),
Subsignal("dq", Pins("R14", "R15", "P14", "N14")),
IOStandard("LVCMOS33")
),
# DDR3 SDRAM
("ddram", 0,
Subsignal("a", Pins(
"E17 G17 F17 C17 G16 D16 H16 E16",
"H14 F15 F20 H15 C18 G15"),
IOStandard("SSTL135")),
Subsignal("ba", Pins("B17 D18 A17"), IOStandard("SSTL135")),
Subsignal("ras_n", Pins("A19"), IOStandard("SSTL135")),
Subsignal("cas_n", Pins("B19"), IOStandard("SSTL135")),
Subsignal("we_n", Pins("A18"), IOStandard("SSTL135")),
Subsignal("cs_n", Pins("E22"), IOStandard("SSTL135")),
Subsignal("dm", Pins("A22 C22"), IOStandard("SSTL135")),
Subsignal("dq", Pins(
"D21 C21 B22 B21 D19 E20 C19 D20",
"C23 D23 B24 B25 C24 C26 A25 B26"),
IOStandard("SSTL135"),
Misc("IN_TERM=UNTUNED_SPLIT_40")),
Subsignal("dqs_p", Pins("B20 A23"),
IOStandard("DIFF_SSTL135"),
Misc("IN_TERM=UNTUNED_SPLIT_40")),
Subsignal("dqs_n", Pins("A20 A24"),
IOStandard("DIFF_SSTL135"),
Misc("IN_TERM=UNTUNED_SPLIT_40")),
Subsignal("clk_p", Pins("F18"), IOStandard("DIFF_SSTL135")),
Subsignal("clk_n", Pins("F19"), IOStandard("DIFF_SSTL135")),
Subsignal("cke", Pins("E18"), IOStandard("SSTL135")),
Subsignal("odt", Pins("G19"), IOStandard("SSTL135")),
Subsignal("reset_n", Pins("H17"), IOStandard("SSTL135")),
Misc("SLEW=FAST"),
),
# MII Ethernet
("eth_ref_clk", 0, Pins("U1"), IOStandard("LVCMOS33")),
("eth_clocks", 0,
Subsignal("tx", Pins("M2")),
Subsignal("rx", Pins("P4")),
IOStandard("LVCMOS33")
),
("eth", 0,
Subsignal("rst_n", Pins("R1")), #Signal to ground
#Subsignal("int_n", Pins("L16")), #Signal to 3.3V
Subsignal("mdio", Pins("H1")),
Subsignal("mdc", Pins("H2")),
Subsignal("rx_dv", Pins("L3")),
Subsignal("rx_er", Pins("U5")),
Subsignal("rx_data", Pins("M4 N3 N4 P3 R3 T3 T4 T5")),
Subsignal("tx_en", Pins("T2")),
Subsignal("tx_er", Pins("J1")),
Subsignal("tx_data", Pins("R2 P1 N2 N1 M1 L2 K2 K1")),
Subsignal("col", Pins("U4")), # col/mod:0
Subsignal("crs", Pins("U2")),
IOStandard("LVCMOS33")
),
# HDMI out
("hdmi_out", 0,
Subsignal("clk_p", Pins("D4"), IOStandard("TMDS_33")),
Subsignal("clk_n", Pins("C4"), IOStandard("TMDS_33")),
Subsignal("data0_p", Pins("E1"), IOStandard("TMDS_33")),
Subsignal("data0_n", Pins("D1"), IOStandard("TMDS_33")),
Subsignal("data1_p", Pins("F2"), IOStandard("TMDS_33")),
Subsignal("data1_n", Pins("E2"), IOStandard("TMDS_33")),
Subsignal("data2_p", Pins("G2"), IOStandard("TMDS_33")),
Subsignal("data2_n", Pins("G1"), IOStandard("TMDS_33")),
Subsignal("scl", Pins("B2"), IOStandard("LVCMOS33")),
Subsignal("sda", Pins("A2"), IOStandard("LVCMOS33")),
Subsignal("hdp", Pins("A3"), IOStandard("LVCMOS33")),
Subsignal("cec", Pins("B1"), IOStandard("LVCMOS33")),
),
]
# Connectors ---------------------------------------------------------------------------------------
_connectors = [
("pmoda", "H4 F4 A4 A5 J4 G4 B4 B5"),
("pmodb", "D5 G5 G7 G8 E5 E6 D6 G6"),
# ("j10", "D5 E5 G5 E6 G7 D6 G8 G6"),
# ("j11", "J4 G4 B4 B5"),
("j12", "AB26 AC26 AB24 AC24 AA24 AB25 AA22 AA23 Y25 AA25 W25 Y26 Y22 Y23 W21 Y21 V26 W26 U25 U26 V24 W24 V23 W23 V18 W18 U22 V22 U21 V21 T20 U20 T19 U19"),
("jp2", "H21 H22 K21 J21 H26 G26 G25 F25 G20 G21 F23 E23 E26 D26 E25 D25"),
("jp3", "AF7 AE7 AD8 AC8 AF9 AE9 AD12 AC10 AA11 AB11 AF11 AE11 AD14 AC14 AF13 AE13 AD12 AC12"),
]
# PMODS --------------------------------------------------------------------------------------------
'''
#SPI SD CARD
("spisdcard", 0,
Subsignal("clk", Pins("A4")),
Subsignal("cs_n", Pins("A5"), Misc("PULLUP True")),
Subsignal("mosi", Pins("H4"), Misc("PULLUP True")),
Subsignal("miso", Pins("F4"), Misc("PULLUP True")),
IOStandard("LVCMOS33")
),
'''
def sdcard_pmod_io(pmod):
return [
# SDCard PMOD:
# - https://store.digilentinc.com/pmod-microsd-microsd-card-slot/
# Over J11 connector
# SIGNAL - CONN/PIN
# 3.3V - 6/3.3V
# GND - 5/GND
# MISO - 1/H4
# MOSI - 2/F4
# CLK - 3/A4
# CS - 4/A5
("spisdcard", 0,
Subsignal("clk", Pins("A4")),
Subsignal("mosi", Pins("F4"), Misc("PULLUP True")),
Subsignal("cs_n", Pins("A5"), Misc("PULLUP True")),
Subsignal("miso", Pins("H4"), Misc("PULLUP True")),
Misc("SLEW=FAST"),
IOStandard("LVCMOS33")
),
]
_sdcard_pmod_io = sdcard_pmod_io("pmoda") # SDCARD PMOD on J11.
serial_pmods = [
("serial_pmod0", 0,
Subsignal("rx", Pins("J4"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("G4"), IOStandard("LVCMOS33")),
),
("serial_pmod1", 0,
Subsignal("rx", Pins("B4"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("B5"), IOStandard("LVCMOS33")),
),
]
# Platform -----------------------------------------------------------------------------------------
class Platform(XilinxPlatform):
default_clk_name = "clk50"
default_clk_period = 1e9/50e6
def __init__(self):
XilinxPlatform.__init__(self, "xc7a100t-2fgg676", _io, _connectors, toolchain="vivado")
self.toolchain.bitstream_commands = ["set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]"]
self.toolchain.additional_commands = ["write_cfgmem -force -format bin -interface spix4 -size 16 -loadbit \"up 0x0 {build_name}.bit\" -file {build_name}.bin"]
self.add_platform_command("set_property INTERNAL_VREF 0.675 [get_iobanks 16]")
self.add_platform_command("set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets clk50_IBUF]")
self.add_platform_command("set_property SEVERITY {{Warning}} [get_drc_checks UCIO-1]")
def create_programmer(self):
return OpenOCD("openocd_xc7_ft232.cfg", "bscan_spi_xc7a100t.bit")
def do_finalize(self, fragment):
XilinxPlatform.do_finalize(self, fragment)
self.add_period_constraint(self.lookup_request("clk50", loose=True), 1e9/50e6)
#
# This file is part of LiteX-Boards.
#
# Copyright (c) 2020 Shinken Sanada <sanadashinken@gmail.com>
# SPDX-License-Identifier: BSD-2-Clause
from litex.build.generic_platform import *
from litex.build.xilinx import XilinxPlatform
from litex.build.openocd import OpenOCD
# IOs ----------------------------------------------------------------------------------------------
_io = [
# Clk / Rst
("clk50", 0, Pins("M22"), IOStandard("LVCMOS33")),
("sys_reset", 0, Pins("J8"), IOStandard("LVCMOS33")),
# Leds
("user_led", 0, Pins("J6"), IOStandard("LVCMOS33")),
("user_led", 1, Pins("H6"), IOStandard("LVCMOS33")),
# Buttons
("key0", 0, Pins("H7"), IOStandard("LVCMOS33")),
# Serial
("serial", 0,
Subsignal("tx", Pins("E3")),
Subsignal("rx", Pins("F3")),
IOStandard("LVCMOS33"),
),
# SPIFlash
("spiflash", 0,
Subsignal("cs_n", Pins("P18")),
Subsignal("clk", Pins("H13")),
Subsignal("mosi", Pins("R14")),
Subsignal("miso", Pins("R15")),
Subsignal("wp", Pins("P14")),
Subsignal("hold", Pins("N14")),
IOStandard("LVCMOS33"),
),
("spiflash4x", 0,
Subsignal("cs_n", Pins("P18")),
Subsignal("clk", Pins("H13")),
Subsignal("dq", Pins("R14", "R15", "P14", "N14")),
IOStandard("LVCMOS33")
),
# DDR3 SDRAM
("ddram", 0,
Subsignal("a", Pins(
"E17 G17 F17 C17 G16 D16 H16 E16",
"H14 F15 F20 H15 C18 G15"),
IOStandard("SSTL135")),
Subsignal("ba", Pins("B17 D18 A17"), IOStandard("SSTL135")),
Subsignal("ras_n", Pins("A19"), IOStandard("SSTL135")),
Subsignal("cas_n", Pins("B19"), IOStandard("SSTL135")),
Subsignal("we_n", Pins("A18"), IOStandard("SSTL135")),
Subsignal("cs_n", Pins("E22"), IOStandard("SSTL135")),
Subsignal("dm", Pins("A22 C22"), IOStandard("SSTL135")),
Subsignal("dq", Pins(
"D21 C21 B22 B21 D19 E20 C19 D20",
"C23 D23 B24 B25 C24 C26 A25 B26"),
IOStandard("SSTL135"),
Misc("IN_TERM=UNTUNED_SPLIT_40")),
Subsignal("dqs_p", Pins("B20 A23"),
IOStandard("DIFF_SSTL135"),
Misc("IN_TERM=UNTUNED_SPLIT_40")),
Subsignal("dqs_n", Pins("A20 A24"),
IOStandard("DIFF_SSTL135"),
Misc("IN_TERM=UNTUNED_SPLIT_40")),
Subsignal("clk_p", Pins("F18"), IOStandard("DIFF_SSTL135")),
Subsignal("clk_n", Pins("F19"), IOStandard("DIFF_SSTL135")),
Subsignal("cke", Pins("E18"), IOStandard("SSTL135")),
Subsignal("odt", Pins("G19"), IOStandard("SSTL135")),
Subsignal("reset_n", Pins("H17"), IOStandard("SSTL135")),
Misc("SLEW=FAST"),
),
# MII Ethernet
("eth_ref_clk", 0, Pins("U1"), IOStandard("LVCMOS33")),
("eth_clocks", 0,
Subsignal("tx", Pins("M2")),
Subsignal("rx", Pins("P4")),
IOStandard("LVCMOS33")
),
("eth", 0,
Subsignal("rst_n", Pins("R1")), #Signal to ground
#Subsignal("int_n", Pins("L16")), #Signal to 3.3V
Subsignal("mdio", Pins("H1")),
Subsignal("mdc", Pins("H2")),
Subsignal("rx_dv", Pins("L3")),
Subsignal("rx_er", Pins("U5")),
Subsignal("rx_data", Pins("M4 N3 N4 P3 R3 T3 T4 T5")),
Subsignal("tx_en", Pins("T2")),
Subsignal("tx_er", Pins("J1")),
Subsignal("tx_data", Pins("R2 P1 N2 N1 M1 L2 K2 K1")),
Subsignal("col", Pins("U4")), # col/mod:0
Subsignal("crs", Pins("U2")),
IOStandard("LVCMOS33")
),
# HDMI out
("hdmi_out", 0,
Subsignal("clk_p", Pins("D4"), IOStandard("TMDS_33")),
Subsignal("clk_n", Pins("C4"), IOStandard("TMDS_33")),
Subsignal("data0_p", Pins("E1"), IOStandard("TMDS_33")),
Subsignal("data0_n", Pins("D1"), IOStandard("TMDS_33")),
Subsignal("data1_p", Pins("F2"), IOStandard("TMDS_33")),
Subsignal("data1_n", Pins("E2"), IOStandard("TMDS_33")),
Subsignal("data2_p", Pins("G2"), IOStandard("TMDS_33")),
Subsignal("data2_n", Pins("G1"), IOStandard("TMDS_33")),
Subsignal("scl", Pins("B2"), IOStandard("LVCMOS33")),
Subsignal("sda", Pins("A2"), IOStandard("LVCMOS33")),
Subsignal("hdp", Pins("A3"), IOStandard("LVCMOS33")),
Subsignal("cec", Pins("B1"), IOStandard("LVCMOS33")),
),
]
# Connectors ---------------------------------------------------------------------------------------
_connectors = [
("pmoda", "H4 F4 A4 A5 J4 G4 B4 B5"),
("pmodb", "D5 G5 G7 G8 E5 E6 D6 G6"),
# ("j10", "D5 E5 G5 E6 G7 D6 G8 G6"),
# ("j11", "J4 G4 B4 B5"),
("j12", "AB26 AC26 AB24 AC24 AA24 AB25 AA22 AA23 Y25 AA25 W25 Y26 Y22 Y23 W21 Y21 V26 W26 U25 U26 V24 W24 V23 W23 V18 W18 U22 V22 U21 V21 T20 U20 T19 U19"),
("jp2", "H21 H22 K21 J21 H26 G26 G25 F25 G20 G21 F23 E23 E26 D26 E25 D25"),
("jp3", "AF7 AE7 AD8 AC8 AF9 AE9 AD12 AC10 AA11 AB11 AF11 AE11 AD14 AC14 AF13 AE13 AD12 AC12"),
]
# PMODS --------------------------------------------------------------------------------------------
'''
#SPI SD CARD
("spisdcard", 0,
Subsignal("clk", Pins("A4")),
Subsignal("cs_n", Pins("A5"), Misc("PULLUP True")),
Subsignal("mosi", Pins("H4"), Misc("PULLUP True")),
Subsignal("miso", Pins("F4"), Misc("PULLUP True")),
IOStandard("LVCMOS33")
),
'''
def sdcard_pmod_io(pmod):
return [
# SDCard PMOD:
# - https://store.digilentinc.com/pmod-microsd-microsd-card-slot/
# Over J11 connector
# SIGNAL - CONN/PIN
# 3.3V - 6/3.3V
# GND - 5/GND
# MISO - 1/H4
# MOSI - 2/F4
# CLK - 3/A4
# CS - 4/A5
("spisdcard", 0,
Subsignal("clk", Pins("A4")),
Subsignal("mosi", Pins("F4"), Misc("PULLUP True")),
Subsignal("cs_n", Pins("A5"), Misc("PULLUP True")),
Subsignal("miso", Pins("H4"), Misc("PULLUP True")),
Misc("SLEW=FAST"),
IOStandard("LVCMOS33")
),
]
_sdcard_pmod_io = sdcard_pmod_io("pmoda") # SDCARD PMOD on J11.
serial_pmods = [
("serial_pmod0", 0,
Subsignal("rx", Pins("J4"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("G4"), IOStandard("LVCMOS33")),
),
("serial_pmod1", 0,
Subsignal("rx", Pins("B4"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("B5"), IOStandard("LVCMOS33")),
),
]
# Platform -----------------------------------------------------------------------------------------
class Platform(XilinxPlatform):
default_clk_name = "clk50"
default_clk_period = 1e9/50e6
def __init__(self):
XilinxPlatform.__init__(self, "xc7a100t-2fgg676", _io, _connectors, toolchain="vivado")
self.toolchain.bitstream_commands = ["set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]"]
self.toolchain.additional_commands = ["write_cfgmem -force -format bin -interface spix4 -size 16 -loadbit \"up 0x0 {build_name}.bit\" -file {build_name}.bin"]
self.add_platform_command("set_property INTERNAL_VREF 0.675 [get_iobanks 16]")
self.add_platform_command("set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets clk50_IBUF]")
self.add_platform_command("set_property SEVERITY {{Warning}} [get_drc_checks UCIO-1]")
def create_programmer(self):
return OpenOCD("openocd_xc7_ft232.cfg", "bscan_spi_xc7a100t.bit")
def do_finalize(self, fragment):
XilinxPlatform.do_finalize(self, fragment)
self.add_period_constraint(self.lookup_request("clk50", loose=True), 1e9/50e6)
......@@ -52,6 +52,7 @@ class TestTargets(unittest.TestCase):
platforms.append("acorn_cle_215")
platforms.append("marblemini")
platforms.append("litefury")
platforms.append("qmtech_wukong")
# Xilinx Kintex7
platforms.append("genesys2")
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment